Eltako

Radio actuator multifunction power surge switch for installation and AP mounting, 1+1 closer not potential-free 10 A /250W AC, incandescent lamps 2000 W, stand-by loss only 0.9 W, with the upper rotary knob several different power surge switch functions can be selected, second rotary switch is required for learning the radio transmitters. Material quality: Thermoplastic Finishing of the surface: matt Suitable for dimmer: No Suitable for pulse pushers: Yes Suitable for roller shutter switch: No Suitable for switch: Yes In the case: Yes In the tube socket housing: No As module/plate: No Tasting operation: Yes Switching operation: Yes With radio hand transmitter: Yes With radio coding device: No With radio button: Suitable for blind switch: No Suitable for blind switch: No. 1+1 lock not potential-free 10A/250V AC, light bulbs 2000 Watt. Encrypted radio, bidirectional radio and repeater function can be switched on. Stand-by loss only 0.8 Watt. For installation. 45mm long, 45mm wide, 33mm deep. Supply, switching and control voltage locally 230W. If the supply voltage fails, the switching state is maintained. When the supply voltage is recurring, it is switched off in a defined manner. This radio actuator as a multifunctional power surge switch has the most modern hybrid technology we have developed: We have combined the wear-free reception and evaluation electronics with two bistable relays which switch in the zero passage. As a result, there is no coil loss power and no heating as a result even in the switched-on state. After installation, wait for the automatic short synchronization before the switched consumer is placed on the network. In addition to the radio control input via an internal antenna, this multi-function current surge switch can also be locally controlled with a conventional 230V control probe installed beforehand. maximum current as a sum of both contacts 16A

Radio actuator power surge group switch for installation and AP mounting, 1+1 closer not potential-free 10A/250V AC, for roller shutters and shading elements, stand-by loss only 0.8 Watt, switching and control voltage 230W radio actuator 230W. 1+1 lock not potential-free 4A/250V AC, for roller shutters and shading elements. Encrypted radio, bidirectional radio and repeater function can be switched on. Stand-by loss only 0.8 Watt. For installation. 45mm long, 45mm wide, 33mm deep. Supply, switching and control voltage locally 230W. If the supply voltage fails, it is switched off in a defined manner. In addition to the radio control input via an internal antenna, this radio actuator can also be controlled locally by means of a conventional 230V control probe mounted beforehand. Encoded sensors can be learned. Bidirectional radio and/or a repeater function can be switched on. Each state change and the central control telegrams received are then confirmed with a radio telegram. This radio telegram can be taught in other actuators, the GFVS software and in universal displays. With the upper rotary switch, up to 35 radio buttons are assigned in the LRN position, one or more central control buttons thereof. The desired function of this current surge group switch is then selected: GS1 = group switch with pushbutton control and drop delay in seconds. It is possible to learn both a radio button with the function of up-hold-down stop as a universal probe such as the local probe, and also a radio button such as a roller shutter double probe as a directional probe with up-press up and down press down. Short tipping immediately interrupts the movement. Central control can be performed dynamically with and without priority. The LED accompanies the learning process according to the user manual and displays radio control commands during operation by short flashing. Mounting type: Aufputz Integrated timer: No Mi

short stroke probe wg pure white glossy, 4 closers 8A/250V AC, contact distance 0.5mm, 80x80mm outside, frame internal dimensions 55x55mm, 15mm high. Included are the frame R, a large rocker W, a double rocker DW, an intermediate frame ZR (all the same color), the holding plate HP and the probe module. Mounting via a 55mm switch box. For screw fastening on 55mm switch cans we recommend sheet metal counter screws 2,9x25mm, DIN 7982 C. The unprinted double rocker is snapped onto the probe module. If these are to be exchanged for the large unprinted rocker, then pull the rocker halves forward and do not bend towards the center. Then the large rocker snaps on in such a way that its markings 0 and I correspond to the probe module on the rear side. The Eltako-Frame can be installed at any time against a frame with internal dimensions 55x55mm of other manufacturers are exchanged. Color: white Halogen-free: Yes Text field/description area: Yes Feedback contact: No Number of actuators: 2 With lighting: No Surface: Other surface design: glossy Rated voltage: 230 V

Universal dimming switch with rotary knob, Power MOSFET up to 800W. Automatic lamp detection. Stand-by loss only 0.2 Watt. Minimum brightness and maximum brightness adjustable. DIN-EN 60715 TH35 for mounting on support rail. 2 division units = 36 mm wide, 58 mm deep. Universal dimming switch for lamps up to 800W, depending on the ventilation conditions, dimmable energy saving lamps ESL and dimmable 230V LED lamps additionally depending on the lamp electronics. Up to 3600W with power inputs LUD12 at the terminals X1 and X2. Universal control voltage 8..230V UC Mounting type: REG Color: blue Operation type: rotary knob Halogen-free: Yes Composition: other load type: universal Serial dimmer: No Conveyor input: No Light value store: Yes Applicable with button: Yes Applicable with motion detector: No Applicable with presence detector: No Applicable with timer/timer: No Applicable with radio button: No. Automatic lamp detection. Stand-by loss only 0.2 Watt. Minimum brightness and maximum brightness adjustable. DIN-EN 60715 TH35 for mounting on support rail. 2 division units = 36mm wide, 58mm deep. Universal dimming switch for lamps up to 800W, depending on the ventilation conditions, dimmable energy saving lamps ESL and dimmable 230V LED lamps additionally depending on the lamp electronics. Up to 3600W with power add-ons LUD12 at the connections X1 and X2. Universal control voltage 8..230V UC, galvanically isolated from supply and switching voltage 230W. No minimum load required. PWM control with 10-24V DC to d

Tip-Funk button actuators UP-Funk button actuator with rocker and frame. 84x84x16mm
or assembly into the e-design switch system. Pure white glossy
With Power MOSFET. 230V and halogen lamps up to 300W,
230V LED lamps up to 100W. No inductive (wound) transformers.
With children's room and slumber circuit. With integrated universal
Direction sensor and connection for additional conventional probes.
Stand-by-loss only 0.7 Watt.

Tip-Funk button actuators UP-Funk button actuator with rocker and frame. For single mounting 80x80x15/33mm
or assembly into the 55s switch system. Pure white glossy
With Power MOSFET. 230V and halogen lamps up to 300W,
230V LED lamps up to 100W. No inductive (wound) transformers.
With children's room and slumber circuit. With integrated universal
Direction sensor and connection for additional conventional probes.
Stand-by-loss only 0.7 Watt.

Radio actuator for installation, dimming switch for LED 12-36V DC, up to 4A, stand-by loss only 0.2-0.4 Watt, minimum brightness and dimming speed adjustable, with children's room and slumber circuit, additionally with light scene control via PC or with radio buttons. Encrypted radio, bidirectional radio and repeater function connectable PWM dimming switch for LED 12-36VDC, up to 4A stand-by loss only 0.2-0.4 Watt. Minimum brightness and dimming speed adjustable. With children's room and slumber circuit. In addition with light scene control via PC or with radio buttons. Encrypted radio, bidirectional radio and repeater function can be switched on. For installation. 45mm long, 45mm wide, 33mm deep. Supply voltage 12 to 36V DC, depending on the connected LED illumination. Output voltage PWM (pulse-width modulation). Output current max. 4A. A pulse-resistant DC power supply is required which supplies the required voltage and the required current of the LED lamp(s). Universal control voltage 8..230V UC, galvanically isolated from the supply and switching voltage. The set brightness level remains stored when switching off (memory). In the event of a power failure, the switching position and the brightness stage are stored and is switched on when the supply voltage is returned. Automatic electronic overload protection and overtemperature shutdown. From the manufacturing week 11/14, encrypted sensors can be learned. Bidirectional radio and/or a repeater function can be switched on. With the upper %Lampe The minimum brightness (fully dimmed) can be set. In the LRN position, up to 35 radio buttons are assigned, one or more central control buttons thereof. The dimming speed can be set with the lower dim speed rotary switch. In addition to the radio control input via an internal antenna, this dimming switch can also be equipped with an event

Mounting type: other protection type (IP): IP20 Max. switching current: 10 A Max. Switching power: 2000 W Max. Number of switching outputs: 1 Bus system EIB/KNX: No Bus system Funkbus: Yes Bus system Powernet: No Bus connection included: Yes Bus system LON: No Other bus systems: without on-site/hand operation: Yes With LED display: Yes C load: Yes Rated current: 10 A Rated operating voltage: 230 - 230 W Different phases connectable: No Modular expansion option: No 1 lock not potential-free 10A/250V AC, light bulbs 2000 Watt, ESL and LED up to 400 Watt. Encrypted radio, bidirectional radio and repeater function can be switched on. Stand-by loss only 0.8 Watt. Intermediate plug for German protective contact socket. With increased contact protection. Supply and switching voltage 230W. If the supply voltage fails, the switching state is maintained. When the supply voltage is recurring, it is switched off in a defined manner. After insertion, wait for the automatic short synchronization before the switched consumer is inserted. This radio actuator has the most modern hybrid technology we have developed: We have combined the wear-free reception and evaluation electronics with a bistable relay. From the manufacturing week 11/14, encrypted sensors can be learned. Bidirectional radio and/or a repeater function can be switched on. Each state change and the central control telegrams received are then confirmed with a radio telegram. This radio telegram can be taught in other actuators, the GFVS software and in universal displays. With the left button LRN up to 35 radio buttons are assigned, either as a universal probe, direction probe or central control probe. Up to 35 radio-window door contacts FTK or radio-airport window handles can be learned for the control of extractor hoods or the like. Several FTK or radio hopper window handles are linked. Will an FTK or radio

Wireless Switch: Universal Dimming Switch for Built-in and AP Mounting, Universal Dimming Switch for R, L and C Loads, Automatic Lamp Detection, with which the % Rotary Switch can set the minimum brightness (full dimming) with the dim-speed Rotary Switch can set the dimming speed, automatic electronic overload protection and overtemperature switch. Automatic lamp detection. Stand-by-loss only 0.7 Watt. Minimum brightness or dimming speed adjustable. With children's room, slumber and light alarm. In addition to light scene control. Encrypted radio, bidirectional radio and repeater function can be switched on. For installation. 45mm long, 45mm wide, 33mm deep. Universal dimming switch for lamps up to 300W, depending on the ventilation conditions. Dimmable energy-saving lamps ESL and dimmable 230V LED lamps additionally depend on lamp electronics. Switching in the zero passage with soft-on and soft-out for lamp protection. Supply, switching and control voltage locally 230W. No minimum load required. The set brightness level remains stored when switching off (memory). In the event of a power failure, the switching position and the brightness stage are stored and is switched on when the supply voltage is returned. car

Powerline sensor input for mounting in 58 mm switch boxes, powerline sensor input with 1 channel, sensor input 230W, stand-by loss only 0.5 Watt. For controlling and switching at various points. Number of inputs: 1 Powerline sensor input with 1 channel. 53x43mm, 25mm deep, for mounting in 58mm switch boxes. Sensor input 230W. Stand-by loss only 0.5 Watt. For controlling and switching at various points. The sensor input acts on all actuators with the same address or as a central probe when the element address 0 is used. For address assignment there are two rotary switches on the front: The left rotary switch determines the group address g with 16 alphabetical values from A to P. The right rotary switch determines the element address e with 16 numerical values from 0 to 15. Above it there is a sliding switch as a configuration switch with the positions 0, 1 and 2. On the left of the rotary switches there is a red LED that displays all activities. In addition, the reset button and on the right there is a service pin. Functions according to user manual. The above connection terminals are plug terminals for conductor cross sections from 0.2mm2 to 1.5mm2.

Radio transmitters the batteryless remote control contains 2 same radio modules as the radio button FT4 and has 2 double rockers, therefore it is possible to send 8 evaluable radio telegrams Color: aluminum anthracite Number of channels: 8 Window transmitters: No Suitable for display element: No Hand transmitter: Yes Wall transmitter: No Remote control: Yes Halogen-free: Yes Finishing of the surface: matte. The batteryless remote control contains two identical radio modules and has 2 double rockers. 8 evaluable radio telegrams can therefore be sent. A wall bracket WHF-al and 2 pieces stainless steel countersink screws 2.9x25mm and dowel 5x25mm are included for wall mounting. The rockers can be simply pulled off and replaced by laser-engraved rockers.

Radio antenna module for mounting on support rail DIN-EN 60715 TH35, forwards all radio signals addressed to downstream radio actuators in its receiving area, mini-USB for connecting a PC for creating a device list, for configuring the actuators using the PCT14 PC tool and for data backup, supply voltage 12V DC radio antenna module for the Eltako-RS485 bus with interchangeable antenna. With integrated power supply 12V DC/8W. Bidirectional. Encrypted radio. Stand-by-loss only 1 watt. If required, a radio antenna FA250 or FA200 can be connected. Row mounting device for mounting on support rail. 36mm wide, 58mm deep. Supply voltage 230V. Included are 2 terminal resistors for mounting with imprint, 1/2 TE, 3 plug-in bridges 1 TE (including 1 replacement), 2 plug-in bridges 1/2 TE (including 1 replacement) and a plug-in bridge mounting tool SMW14. The radio antenna module FAM14 receives and checks all signals from the radio transmitters and repeaters in its reception area. These are passed through an RS485 interface to downstream RS485 bus switch actuators: Up to 126 channels can be connected to the RS485 bus. Bus and power supply with plug-in bridge. At the last actuator, the adjacent second terminal resistor must be plugged on. Up to 128 encrypted sensors can be learned. Mini USB to connect a PC to create a device list, to configure the actuators using PCT14 and to backup data. A legalization code for downloading the PCT14 from the Eltako-Homepage www.eltako.de is attached to FAM14. With a load greater than 50% of the rated power of 8W, half a division unit is required for ventilation with the spacer DS14 on the left side. TLE: 2 radio frequency: 868 MHz

Powerline actuator for mounting in 58 mm switch boxes, Powerline actuator with 1 channel. Suitable as current surge switches or relays. 1 lock not potential-free 10A/250V AC, light bulbs 2000 Watt. Powerline actuator with 1 channel. 53x43mm, 25mm deep, for mounting in 58mm switch boxes. Suitable as current surge switches or relays. 1 lock not potential-free 10A/250V AC, light bulbs 2000 Watt. Sensor input 230W. Stand-by loss only 0.5 Watt. For controlling and switching at the same point. For address assignment there are two rotary switches on the front: The left rotary switch determines the group address g with 16 alphabetical values from A to P. The right rotary switch determines the element address e with 16 numerical values from 0 to 15. Above it there is a sliding switch as a configuration switch with the positions 0, 1 and 2. On the left of the rotary switches there is a red LED that displays all activities. In addition, the reset button and on the right there is a service pin. Functions according to user manual. The above connection terminals are plug terminals for conductor cross sections from 0.2mm2 to 1.5mm2. Max. switching current: 10 A Max. Switching power: 2000 W Max. Number of switching outputs: 1 Bus system EIB/KNX: No Bus system Funkbus: No Bus system Powernet: Yes Bus coupling included: Yes Bus system LON: No Other bus systems: without LED display: Yes C load: Yes Various phases connectable: No Modular expansion option: No

Powerline actuator for mounting in 58 mm switch cans,Powerline actuator with 2 channels, can be used as a power surge switch or relay. 1+1 lock not potential-free 5A/250V AC, incandescent lamps 1000 Watt. 2 sensor inputs with internal low voltage. Stand-by loss only 0.5 Watt. For controlling and switching at the same point. Powerline actuator with 2 channels. 53x43mm, 25mm deep, for mounting in 58mm switch boxes. Suitable as current surge switches or relays. 1+1 lock not potential-free 5A/250V AC, incandescent lamps 1000 Watt. 2 sensor inputs with internal low voltage. Stand-by loss only 0.5 Watt. For controlling and switching at the same point. Use only potential-free switching elements. Internal low voltage at the sensor inputs. For address assignment there are two rotary switches on the front: The left rotary switch determines the group address g with 16 alphabetical values from A to P. The right rotary switch determines the element address e with 16 numerical values from 0 to 15. Above it there is a sliding switch as a configuration switch with the positions 0, 1 and 2. Position 0: sensor inputs act as a pushbutton (current pushbutton switch). On the left of the rotary switches there is a red LED that displays all activities. In addition, the reset button and on the right there is a service pin. Functions according to user manual. The above connection terminals are plug terminals for conductor cross sections from 0.2mm2 to 1.5mm2. In addition, there are three strands with core end sleeves for the two control inputs with internal low voltage. Max. switching current: 5 A Max. Switching power: 1000 W Max. Number of switching outputs: 2 Bus system EIB/KNX: No Bus system Funkbus: No Bus system Powernet: Yes Bus coupling included: Yes Bus system LON: No Other bus systems: without LED display: Yes C load: Yes Various phases connectable: No Modular expansion option: No

Powerline blind actuator for controlling and switching at the same location, only use potential-free switching elements, internal low voltage at the sensor inputs. The control inputs can be used for a blind button or a blind switch. The runtime is preset at 120 seconds and can be changed with the installation software SIENNA-Professional. Powerline blind actuator for 1 motor. 53x43mm, 25mm deep, for mounting in 58mm switch boxes. 1+1 lock for motors up to 3A. 2 sensor inputs with internal low voltage. Stand-by loss only 0.5 Watt. For controlling and switching at the same point. Use only potential-free switching elements. Internal low voltage at the sensor inputs. The control inputs can be used for a blind button or a blind switch. The runtime is preset at 120 seconds and can be changed with the installation software SIENNA-Professional. For address assignment there are two rotary switches on the front: The left rotary switch determines the group address g with 16 alphabetical values from A to P. The right rotary switch determines the element address e with 16 numerical values from 0 to 15. Above it there is a sliding switch as a configuration switch with positions 0.1 and 2. On the left of the rotary switches there is a red LED that displays all activities. In addition, the reset button and on the right there is a service pin. Functions according to user manual. The above connection terminals are plug terminals for conductor cross sections from 0.2mm2 to 1.5mm2. In addition, there are three strands with core end sleeves for the two control inputs with internal low voltage. Max. number of blind exits: 1 Number of entrances: 2 Power type: AC Bus system EIB/KNX: No Bus system Funkbus: No Bus system Powernet: Yes Bus coupling included: Yes Max. Switching power: 650 W Switching current ohmsch: 3 A Bus system LON: No Other bus systems: without