Eltako PL-SAM2 blind actuator

Powerline blind actuator for controlling and switching at the same location, only use potential-free switching elements, internal low voltage at the sensor inputs. The control inputs can be used for a blind button or a blind switch. The runtime is preset at 120 seconds and can be changed with the installation software SIENNA-Professional. Powerline blind actuator for 1 motor. 53x43mm, 25mm deep, for mounting in 58mm switch boxes. 1+1 lock for motors up to 3A. 2 sensor inputs with internal low voltage. Stand-by loss only 0.5 Watt. For controlling and switching at the same point. Use only potential-free switching elements. Internal low voltage at the sensor inputs. The control inputs can be used for a blind button or a blind switch. The runtime is preset at 120 seconds and can be changed with the installation software SIENNA-Professional. For address assignment there are two rotary switches on the front: The left rotary switch determines the group address g with 16 alphabetical values from A to P. The right rotary switch determines the element address e with 16 numerical values from 0 to 15. Above it there is a sliding switch as a configuration switch with positions 0.1 and 2. On the left of the rotary switches there is a red LED that displays all activities. In addition, the reset button and on the right there is a service pin. Functions according to user manual. The above connection terminals are plug terminals for conductor cross sections from 0.2mm2 to 1.5mm2. In addition, there are three strands with core end sleeves for the two control inputs with internal low voltage. Max. number of blind exits: 1 Number of entrances: 2 Power type: AC Bus system EIB/KNX: No Bus system Funkbus: No Bus system Powernet: Yes Bus coupling included: Yes Max. Switching power: 650 W Switching current ohmsch: 3 A Bus system LON: No Other bus systems: without