Eltako

Eltako PL-SAM2 blind actuator
Eltako PL-SAM2 blind actuator
3-10 days
Powerline blind actuator for controlling and switching at the same location, only use potential-free switching elements, internal low voltage at the sensor inputs. The control inputs can be used for a blind button or a blind switch. The runtime is preset at 120 seconds and can be changed with the installation software SIENNA-Professional. Powerline blind actuator for 1 motor. 53x43mm, 25mm deep, for mounting in 58mm switch boxes. 1+1 lock for motors up to 3A. 2 sensor inputs with internal low voltage. Stand-by loss only 0.5 Watt. For controlling and switching at the same point. Use only potential-free switching elements. Internal low voltage at the sensor inputs. The control inputs can be used for a blind button or a blind switch. The runtime is preset at 120 seconds and can be changed with the installation software SIENNA-Professional. For address assignment there are two rotary switches on the front: The left rotary switch determines the group address g with 16 alphabetical values from A to P. The right rotary switch determines the element address e with 16 numerical values from 0 to 15. Above it there is a sliding switch as a configuration switch with positions 0.1 and 2. On the left of the rotary switches there is a red LED that displays all activities. In addition, the reset button and on the right there is a service pin. Functions according to user manual. The above connection terminals are plug terminals for conductor cross sections from 0.2mm2 to 1.5mm2. In addition, there are three strands with core end sleeves for the two control inputs with internal low voltage. Max. number of blind exits: 1 Number of entrances: 2 Power type: AC Bus system EIB/KNX: No Bus system Funkbus: No Bus system Powernet: Yes Bus coupling included: Yes Max. Switching power: 650 W Switching current ohmsch: 3 A Bus system LON: No Other bus systems: without
€142.08
Eltako PL-SM8 decentralized 8-channel sensor input
Eltako PL-SM8 decentralized 8-channel sensor input
3-10 days
Powerline sensor input for mounting in 58 mm switches, powerline sensor input with 8 channels, 8 sensor inputs with internal low voltage. Stand-by loss only 0.5 Watt. For controlling and switching at various points. Powerline sensor input with 8 channels. 53x43mm, 25mm deep, for mounting in 58mm switch boxes. 8 sensor inputs with internal low voltage. Stand-by loss only 0.5 Watt. For controlling and switching at various points. Use only potential-free switching elements. Internal low voltage at the sensor inputs. For address assignment there are two rotary switches on the front: The left rotary switch determines the group address g with 16 alphabetical values from A to P. The right rotary switch determines the element address e with 16 numerical values from 0 to 15. Above it there is a sliding switch as a configuration switch. Position 0: 2 adjacent inputs as a directional sensor for AUF/AB or ON/OFF. On the left of the rotary switches there is a red LED that displays all activities. In addition, the reset button and on the right there is a service pin. Functions according to user manual. The above connection terminals are plug terminals for conductor cross sections from 0.2mm2 to 1.5mm2. The addresses of the 8 inputs can also be freely assigned with the installation software SIENNA-Professional. The upper sleeve strip with 9 strands with core end sleeves is plugged. 8 control inputs with internal low voltage. Number of inputs: 8
€142.08
Eltako FHFA-al window handle Atlanta
Eltako FHFA-al window handle Atlanta
3-10 days
Protection type (IP): IP20 Radio frequency: 868 Mhz Range: 30 m Number of commands: 2 Power supply: other Rolling code system: No Radio transmitter: No Radio button under plaster: No Radio button on plaster: Yes Radio coder: No Radio-Hoppe window handles Secusignal series Atlanta with integrated radio transmitter module, battery- and wireless. Create the radio telegrams even when opening, tilting and closing the windows. The complete assembly material is included. The radio sensor can be learnt in the following actuators and in the building radio visualization and control software: F2L14, F4HK14, FGM, FHK14, FHK61, FMZ14, FMZ61, FSB14, FSB61, FSB71, FSG14, FSR14, FSR61, FSR71, FUA FDD14 FUTH.
€148.65
Eltako FUD71-230V radio actuator universal dimming.
Eltako FUD71-230V radio actuator universal dimming.
3-10 days
Universal dimming switch for installation in the 230V power supply line, for example in intermediate ceilings and luminaires, universal dimming switch, Power MOSFET up to 400W, automatic lamp detection. Minimum brightness and dimming speed adjustable. With children's room, slumber and light alarm circuit as well as constant light control and master-slave operation. In addition with light scene control via PC or with radio buttons. Encrypted radio, bidirectional radio and repeater function can be switched on. Stand-by-loss only 0.7 Watt. Number of commands: 32 Material quality: Thermoplastic Finishing of surface: matt Suitable for dimmer: Yes Suitable for pulse pushers: No Suitable for roller shutter switch: No Suitable for switch: No Rolling code system: Yes In the case: Yes In the tube socket housing: No As module/plate: No Tasting operation: Yes Switching operation: No With radio hand transmitter: Yes With radio encoder: No. Automatic lamp detection. Minimum brightness and dimming speed adjustable. With children's room, slumber and light alarm circuit as well as constant light control and master-slave operation. In addition with light scene control via PC or with radio buttons. Encrypted radio, bidirectional radio and repeater function can be switched on. Stand-by-loss only 0.7 Watt. Mounting into the 230V power supply line, for example in intermediate ceilings and luminaires. 166mm long, 46mm wide and 31mm deep. With cable load. Universal dimming switch for lamps up to 400W, depending on the ventilation conditions. Dimmable energy-saving lamps ESL and dimmable 230V LED lamps additionally depend on lamp electronics. Switching in the zero passage with soft-on and soft-out for lamp protection. The set brightness level remains stored when switching off (memory). In the event of a power failure, the switching position and the brightness
€153.01
Eltako BPS radio set switching 30000014
Eltako BPS radio set switching 30000014
3-10 days
Blister-Pack Switching includes a battery-free and line-free, radio button F4T65 in pure white gloss, as well as a switch actuator FSR61-230V, with power surge switch function Blister-Pack Switching includes a battery-free and line-free radio button F4T65 in pure white glossy and a switch actuator FSR61-230V with power surge switch. F4T65-wg: radio button for single mounting 84x84x16mm or mounting in the e-design switch system. Creates the energy for radio telegrams even at key pressure, therefore without connection line and no stand-by loss. Included are the frame R1E, a rocker, a double rocker, a fastening frame, a holding plate, the radio module and an adhesive film. Radio buttons with a rocker can send two evaluateable signals: press the rocker at the top and press the rocker at the bottom. Radio buttons with double rocker can send four evaluateable signals: press two rockers up and down. The holding plate can be screwed onto a flat surface or glued to the wall, to glass or to furniture by means of the attached adhesive film. The sleeves present in the can are used for screw fastening via a 55mm switch box. The radio sensor illumination FTB can then also be latched from behind to the holding plate. From work, the double rocker is locked onto the radio module. If these are to be exchanged for the large rocker, then pull the rocker halves forward and do not bend towards the center. Then the large rocker snaps on in such a way that its markings 0 and I correspond to the radio module on the rear side. When glued, first attach the set holding plate with frame and fastening frame - with the latches on top and bottom. Then the set radio module with rocker - marking 0 on the back always up - snap in. Before screwing, release the frame with fastening frame from the holding plate. To this end, press the detents of the holding plate outwardly. Then the holding plate - with the
€157.38
Eltako BPS55 Blister-Pack Switching
Eltako BPS55 Blister-Pack Switching
3-10 days
Blister-Pack Switching includes a battery- and line-free, radio button FT55 in pure white gloss, as well as a switch actuator FSR61-230V, with power surge switch function Blister-Pack Switching includes a battery- and line-free radio button FT55 in pure white gloss and a switch actuator FSR61-230V with power surge switch function. FT55-wg: radio button, 80x80mm outside, frame internal dimensions 55x55mm, 15mm high. Creates the energy for radio telegrams even at key pressure, therefore without connection line and no stand-by loss. Included are the frame R, a rocker W55, a double rocker DW55 (all the same color), a fastening frame BRF, the holding plate HP, the radio module and an adhesive film. Radio buttons with a rocker can send two evaluateable signals: press the rocker at the top and press the rocker at the bottom. Radio buttons with double rocker can send four evaluateable signals: press two rockers up and down. The holding plate can be screwed onto a flat surface or glued to the wall, to glass or to furniture by means of the attached adhesive film. The sleeves present in the can are used for screw fastening via a 55mm switch box. The radio sensor illumination FTB can then also be latched from behind to the holding plate. From work, the double rocker is locked onto the radio module. If these are to be exchanged for the large rocker, then pull the rocker halves forward and do not bend towards the center. Then the large rocker snaps on in such a way that its markings 0 and I correspond to the radio module on the rear side. When gluing first the set holding plate with frame and fastening frame ? glue with the latches on top and bottom. Then the set radio module with rocker ? Marking 0 on the back always snap up. Before screwing, release the frame with fastening frame from the holding plate. To this end, press the detents of the holding plate outwardly. Then the holding plate with the latch
€157.38
Eltako TF-BPD Tip-Funk® blister pack Dimmen
Eltako TF-BPD Tip-Funk® blister pack Dimmen
3-10 days
Blisterpack Dimmes with Tip-Funk® radio button TF-1FT and Tip-Funk® Universal Dimmor TF100D-230V. TF-1FT: 1-channel radio button pure white glossy for single mounting 84x84x16mm or assembly in the E-Design switch system. Creates the energy for radio telegrams even at key pressure, therefore without connection line and no stand-by loss. Radio buttons with a rocker can send an evaluable signal: press rocker at the bottom in the area of the marking. The holding plate can be screwed onto a flat surface or glued to the wall, to glass or to furniture by means of the attached adhesive film. The sleeves present in the can are used for screw fastening via a 55mm switch box. TF100D-230V: Radio-Universal-Dimmaktor-Zwischenplug. 100x55x45mm (measures without plug), pure white. With Power MOSFET. 230 V-gloss and halogen lamps up to 300 W, 230 V-LED up to 100 W. No inductive (wound) transformers. With children's room and slumber circuit. No minimum load. Stand-by-loss only 0.7 Watt. Intermediate plug for German protective contact sockets with increased contact protection. Up to 24 radio universal probes, radio direction probes, radio central control probes and movement sensors TF-BSB as well as bidirectional radio can be learned with the comfortable tip radio technology. During learning, the dimmactor can be set to phase cut in order to allow optimum dimming for different LED lights. Mounting type: other number of outputs: 1 output power from/to: 300 - 300 W Voltage range: 230 - 230 W Frequency range: 50 - 50 Hz Version: Dimmactor load type: universal protection type (IP): IP20 Power additive usable: No Bus system EIB/KNX: No Bus system Radiobus: Yes Bus system Powernet: No Bus coupling inclusive: No Bus system LON: No Other bus systems: no
€163.94
Eltako FUA12-230V Radio Universal actuator
Eltako FUA12-230V Radio Universal actuator
3-10 days
Radio universal actuator with interchangeable antenna. Power surge relay with 1 changer potential-free 10 A/250 W AC, incandescent lamps 2000 W, with DX technology, bidirectional, vecrypted radio, stand-by-loss only 0.9 W, if required, a radio antenna FA250 or FA200 can be connected, the radio universal actuator combines the functions of a radio antenna module and an actuator as a 1-channel current exchange. Electric shock switch relay with 1 changer potential-free 10A/250V AC, light bulbs 2000W, with DX technology. Bidirectional. Encrypted radio. Stand-by loss only 0.9 Watt. If necessary, a radio antenna can be connected. Row mounting device for mounting on support rail. Supply voltage 230W. The radio universal actuator combines the functions of a radio antenna module and an actuator as a 1-channel current surge relay with DX technology. If the supply voltage fails, the switching state is maintained. When the supply voltage is recurring, it is switched off in a defined manner. After installation, wait for the automatic short synchronization before the switched consumer is placed on the network. To this end, simply connect the N conductor to the terminal (N) and L to 15 (L). This results in an additional stand-by loss of only 0.1 Watt. From the production week 08/16, this radio actuator can additionally be locally controlled with a 230V controller on the terminal. In addition, the N conductor must also be connected to the terminal (N). A glow lamp current is not permitted. 230V controller: control current 0.4mA. Maximum parallel capacity (approximately length) of the control line 0.3μF (1000m). Bidirectional radio and/or a repeater function can be switched on. Any change in state as well as the central control telegrams received are confirmed with a radio telegram in bidirectional radio. This radio telegram can be used in other actuators
€172.68
Eltako FBH65S-wg Motion brightness sensor
Eltako FBH65S-wg Motion brightness sensor
3-10 days
Radio motion brightness sensor for ceiling mounting, the radio motion brightness sensor FBH, supplied with a solar module, sends a message into the ELTAKO radio motion brightness sensor for splash mounting 84x84x39mm or assembly into the E-design switch system. Power supply with the integrated solar cell or with a 12VDC power supply or with batteries. In the delivery state, the energy store is empty and must be charged before commissioning. Either via the red-black 12W DC connection cable in approx. 3 minutes or via the solar cell in bright daylight approx. 10 hours or by inserting two AAA batteries (not included) in about 10 minutes. In normal operation, the power supply takes place either via the connection cable with a 12W DC switching power supply FSNT61-12V/6W in an UP-dose under the sensor or with AAA batteries, supported by the solar cell, or only with the solar cell with normal ambient brightness, in the daily average at least 200 lux. If only the solar cell is available, the energy store must be charged several days with daylight. If the connection cable is not required, it can be cut off. As a result, the sensor does not require any installation depth behind the holding plate and can be screwed onto any flat surface. For screwing on, the complete module can be pulled out of the frame. 2 pieces stainless steel counter screws 2.9x25mm and 5x25mm dowels are included. For learning into an actuator located in the learning mode, the adjacent blue or any other available magnet is held to the side wall below the point of the sensor marked with a rectangle. This sends a learning message. A red LED behind the Fresnel lens confirms the transmission of the learning telegram by short flashing. The sensor measures from 0 to 2000 Lux and sends every 100 seconds at a brightness change of at least. 10 Lux a Meldu
€179.24
Eltako BPD Radio Set Dimmen 30000013
Eltako BPD Radio Set Dimmen 30000013
3-10 days
Radio Set Dimmen Blister Pack Dimmen consists of a battery and lineless, radio button F4T65 in pure white, and a universal dimmor FUD61NPN-230V. The dimmer recognizes the type of lamp independently and allows the adjustment of the minimum brightness and the dimming speed Blister-Pack Dimmen consists of a battery- and line-free radio button F4T65 in pure white glossy and a universal dimmor FUD61NPN-230V. The dimmer recognizes the lamp type independently and allows the adjustment of the minimum brightness and the dimming speed. F4T65-wg: radio button for single mounting 84x84x16mm or mounting in the e-design switch system. Creates the energy for radio telegrams even at key pressure, therefore without connection line and no stand-by loss. Included are the frame R1E, a rocker, a double rocker, a fastening frame, a holding plate, the radio module and an adhesive film. Radio buttons with a rocker can send two, radio buttons with double rocker can send four evaluateable signals. The holding plate can be screwed onto a flat surface or glued to the wall, to glass or to furniture by means of the attached adhesive film. The sleeves present in the can are used for screw fastening via a 55mm switch box. The radio sensor illumination FTB can then also be latched from behind to the holding plate. From work, the double rocker is locked onto the radio module. If these are to be exchanged for the large rocker, then pull the rocker halves forward and do not bend towards the center. Then the large rocker snaps on in such a way that its markings 0 and I correspond to the radio module on the rear side. When glued, first attach the set holding plate with frame and fastening frame - with the latches on top and bottom. Then the set radio module with rocker - marking 0 on the back always up - snap in. Before screwing, release the frame with fastening frame from the holding plate. Hi
€185.80
Eltako BPD55 Blister Pack
Eltako BPD55 Blister Pack
3-10 days
Blister-Pack Dimmen consists of a battery and lineless FT55 radio button in pure white shiny and a universal dimmor FUD61NPN-230V. The dimmer recognizes the lamp type independently and allows the adjustment of the minimum brightness and the dimming speed. FT55-wg: radio button, 80x80mm outside, frame internal dimensions 55x55mm, 15mm high. Creates the energy for radio telegrams even at key pressure, therefore without connection line and no stand-by loss. Included are the frame R, a rocker W55, a double rocker DW55 (all the same color), a fastening frame BRF, the holding plate HP, the radio module and an adhesive film. Radio buttons with a rocker can send two evaluateable signals: press the rocker at the top and press the rocker at the bottom. Radio buttons with double rocker can send four evaluateable signals: press two rockers up and down. The holding plate can be screwed onto a flat surface or glued to the wall, to glass or to furniture by means of the attached adhesive film. The sleeves present in the can are used for screw fastening via a 55mm switch box. The radio sensor illumination FTB can then also be latched from behind to the holding plate. From work, the double rocker is locked onto the radio module. If these are to be exchanged for the large rocker, then pull the rocker halves forward and do not bend towards the center. Then the large rocker snaps on in such a way that its markings 0 and I correspond to the radio module on the rear side. When gluing first the set holding plate with frame and fastening frame ? glue with the latches on top and bottom. Then the set radio module with rocker ? Marking 0 on the back always snap up. Before screwing, release the frame with fastening frame from the holding plate. To this end, press the detents of the holding plate outwardly. Then screw the holding plate with the latches on top and bottom, the frame with the fastening frame
€185.80
Eltako FSR61NP-230V + FTK Radio Actuator
Eltako FSR61NP-230V + FTK Radio Actuator
3-10 days
Radio Switching Relay & Radio Window Contact for Mounting and AP Mounting, with already learned radio window door contact FTK-rw, for the control of Dunstab hoods, 1 closer not potential-free 10 A/250W AC Material Quality: Thermoplastic Surface Finishing: matt Suitable for Dimmer: No Suitable for Pulse Pressers: Yes Suitable for Rolling Chargers: No. 10A/250V AC not potential-free for the control of exhaust hoods or the like. Encrypted radio, bidirectional radio and repeater function can be switched on. Stand-by loss only 0.8 Watt. For installation. 45mm long, 45mm wide, 33mm deep. If the supply voltage fails, the switching state is maintained. When the supply voltage is recurring, it is switched off in a defined manner. After installation, wait for the automatic short synchronization before the switched consumer is placed on the network. This radio actuator has the most modern hybrid technology we have developed: We have combined the wear-free reception and evaluation electronics with a bistable relay which switches in the zero passage. As a result, there is no coil loss power and no heating as a result even in the switched-on state. From the manufacturing week 11/14, encrypted sensors can be learned. Bidirectional radio and/or a repeater function can be switched on. Each state change and the central control telegrams received are then confirmed with a radio telegram. This radio telegram can be taught in other actuators, the GFVS software and in universal displays. The rotary switches are on the right positions ER
€208.65
Eltako DSZ15WD3x5A MID three-phase counter MID gee
Eltako DSZ15WD3x5A MID three-phase counter MID gee
3-10 days
Voltage meter, electronic for mounting on support rail DIN-EN 60715 TH35 with adjustable converter ratio, accuracy class B (1)%, S0 interface, measures the active energy on the basis of the currents flowing through the converter, it is possible to connect 1, 2 or 3 converters with secondary currents up to 5A, starting current is 10 ma, N connection must be present, the total power and resettable memory can be displayed
€218.49