Best sellers

Trigger characteristicCNumber of poles (total)1Number of secured poles1Rated currentA6Measurement voltageV230Measurement switching capacity Icn according to EN 60898 at 230 VKA10Measurement switching capacity Icn according to EN 60898 at 400 VKA10Measurement switching capacity Icu according to IEC 60947-2 at 230 VKA0Measurement switching capacity Icu according to IEC 60947-2 at 400 VKA0Type of voltageACEnergy limiting class3FrequencyHZ50 to 60Interconnecting neutral conductornoSuitable for underground installationnoOvervoltage category3Pollution2Width in division units1Installation depthmmANNEXAdditional equipment possibleyesType of protection (IP)IP20

• Low-priced UP wall detector with manual switch on/off/automatic • Tolerant in the detection of small animals Technical data Rated voltage: 230 V / 50 Hz Switching power: 1000 W / 5 A (cos φ 1.0) 250 VA / 1.25 A (cos φ 0.5) detection range: 180° Range: approx. 8 m frontal and approx. 4 m side Mounting height: approx. 1–1.5 m Damping regulator: 5–1000 lx Time controller: short pulse (approx. 1 s), approx. 7 s to 12 min Protection: IP20 Interior Mounting, Class II, CE Temperature range: -20 to +40 °C Mass: 81x81x30mm

Device connection box U 71 GVD-2, device connection box for concrete installation, with enlarged connection space, 4 screw domes with screw spacing 60 mm, combinable, suitable for counter-shaping, with protection class IP30, for concrete installation, up to 90°C, WDE tested, halogen-free, 71 x 71 x 68, also for magnetic fastening

4-pin 3+N, trigger characteristic C, IP20, AC

Circuit breaker 1P+N 6kA C-13A Quick Connect 1MRated current: 13 ATrigger characteristic: CNominal shutdown capacity: 6 kANumber of poles: 2 PNumber of modules: 1AC voltage: 230/240 VInsulation voltage: 500 VFrequency: 50/60 HzConnection type: QuickConnectTorque: 1.9NmTotal loss power at rated current: 4 WDevice life, electrical switching games: 1000Machine life mechanical switching games: 20000Operating temperature: -25 to 60 °CStorage temperature: -25 to 80 °CHeight installed product: 86 mmWide installed product: 17.5 mmDeep installed product: 70 mm

Frame 1x Q.1 polar white, velvet. Cover frame for vertical and horizontal mounting. For use of polar white central pieces. Underput installation, area program, 1-fold. Material: plastic, thermoset, halogen-free. Cover frame for vertical and horizontal mounting. For use of polar white central pieces. Underput installation, area program, 1-fold. Material: plastic, thermoset, halogen-free.

Total number of clamping points3Total number of potentials1Measurement voltage (II / 2) [V]450VMeasurement surge voltage (II / 2) [kV]4KVRated current [A]24AConnection technologyPUSH WIRE®Number of connection points3Type of operationPush inConnectable conductor materialsCopperadhesive, connectable0,5 ... 2,5 mm2 / 18 ... 14 AWGStripping length11 mm / 0.43 inType of wiringSide wiringFire load [MJ]0,019MWeight [g]1017gWidth14 mm / 0.551 in.Height5.8 mm / 0.228 in.Depth16.7 mm / 0.657 in.Safety note 1in earthed nets

for Solo 05 and Profi 05 plastic end cap solo black, LxBxH: 40,3 x 40,3 x 18,8 mm

NEOZED screw cap porcelain size D02, 63A with test hole safety systems NEOZED and DIAZED with extensive accessories. The NEOZED and DIAZED backup system of Siemens as an important component of the SENTRON protection components for electrical installation offers effective personal, device and plant protection through safe disconnection in the overload and short circuit case. It is mainly used in distribution technology and in industrial switching systems. The system is laity-operable and also approved for house installation. The Siemens NEOZED and DIAZED are characterized primarily by: 1. 2. Lock inserts from 2 A to 100 A in different operating classes. 3. Base designs in classic screw-socket technology. 4. Proven quality since 1906. www.siemens.de/sicherungen. Siemens provides a comprehensive portfolio of protective, switching, measuring and monitoring equipment, installation distributors and switches and sockets for safe, efficient electrical infrastructure in buildings and industry.

Clamp for connecting or connecting wires, wires and cables with permanently secure contact. Hardened steel for mechanical forces and high-quality copper with tin coating ensure the best conductivity.

Flexmuff, light grey similar to RAL 7035, high-fat and dense, made of halogen-free base material, non-flammable, for easy mechanical stress, for flexible electrical installation pipes for tight and tensile connection of pipes

Circuit breaker 1polig 6kA B-Characteristic 13A QuickConnect 1 module Circuit breaker with QuickConnect terminal according to DIN EN 60898-1 (VDE 0641 part 11):2003-12; EN 60898-1:2003; EN 60898-1, pr A1:2003, at the exit up to 16A and at the access for the concealment up to 63A. LS with time-delayed thermal trigger for overload protection and electromagnetic trigger for short-circuit protection. Suitable for retrofit installation of additional equipment; Possibility of marking directly on the device and individual removal from the phase rail composite by unlocking the quick attachment of the hat rails.Rated current: 13 ATrigger characteristic: BNominal shutdown capacity: 6 kANumber of poles: 1 PNumber of modules: 1AC voltage: 230/400 VInsulation voltage: 500 VFrequency: 50/60 HzConnection type: QuickConnectTorque: 2,8NmTotal power loss under rated current: 2.2 WDevice life, electrical switching games: 4000Machine life mechanical switching games: 20000Operating temperature: -25 to 60 °CStorage temperature: -25 to 80 °CHeight installed product: 83.4 mmWide installed product: 17.5 mmDeep installed product: 70 mm