Best sellers

The V50 lightning current combination conductor made of halogen-free plastic is suitable for lightning protection potential compensation according to VDE 0185-305 (IEC 62305). A dynamic separation device and optical status display characterize the modularly pluggable arresters. The NPE variant is additionally equipped with a highly loadable spark gap between zero and protective conductors. The CombiController is particularly suitable for lightning protection potential compensation for buildings of the flash protection class III and IV. The flash current-abableite power is 12.5 kA (10/350) per pole and up to 50 kA (10/350) total. The vibration-proof latching and the voltage and type coding ensure safety and avoid confusion between upper and lower parts. The wedge-shaped design of the contacts allows simple insertion and even simpler removal of the upper parts. Additional technical product information can be obtained quickly and easily via the QR code applied to the power shield.

Koaxkabel 1,0/4,6 mm, 3-fach geschirmt 500 m Trommel; 1,0/4,6/6,6mm, Staku - Innenleiter, 96 er Alu - Geflecht, 19,2dB / 800MHz / 31,2dB / 2050MHz

For laying electrical, telephone and antenna cables in pipe systems by means of sliding glass fiber profiles and various guide heads, maximum tensile load: 100 kg, set contains:3 mm glass fiber profile, 2 front sleeves, 3 guide heads (diameter: 8, 11, 14 mm,) 2 connecting sleeves (for repair handle) 2 pull-in sleeves, 2 cable pull-in stockings (4 seconds - 6 mm)

Energy meter three-phase, 1 tariff, direct measurement 63A three-phase energy meter for direct measurement of energy consumption up to 63 A with high accuracy (class B). Suitable for use in all network systems. They are equipped with an illuminated digital display that allows the display of energy consumption and power in a resolution of 7 digits including a descending point. A total counter and a partial counter with counter resetting are integrated. The consumption (counter value) can be transmitted remotely by a pulse output. Wiring errors and connection errors are displayed and the measurement data are stored periodically. Connection: Direct connection Operating current: 0.04/63 A Max. Current (I max) of the measuring circuit: 63 A Power consumption: 8.4 VA Number of modules: 4 Frequency: 50/60 Hz

For the protection of consumer equipment against transient overvoltages caused by direct and indirect flashes, as well as switching operations, application according to IEC 60364-5-53 Section 534, test classes I, II according to IEC 61643-1, SPD type T1, T2 according to EN 61643-11, flash protection class III and IV according to IEC 62305, execution without remote messageNet form-Design of poles3 + N / PRated leakage current (8/20)KA25Rated voltage ACV280Rated voltage DCV0Maximum permanent voltage ACV280Highest continuous voltage DCV0Max. PV voltageV0Protection levelKV0Protection level L-NKV1.5Protection level N-PEKV100Short circuitnoAssembly typeHat rail 35 mmSize5 TEAMax. Conductor cross-section rigid (one/multiple)mm20Max. Conductor cross section flexible (fine)mm20With telecommunication contactnoIntegrated PreservationnoSignaling on the deviceopticalTest class type 2yesType of protection (IP)IP20

Radio, with display, set stereo, with 2 speakers

The V50 lightning current combination conductor made of halogen-free plastic is suitable for lightning protection potential compensation according to VDE 0185-305 (IEC 62305). A dynamic separation device and optical status display characterize the modularly pluggable arresters. The CombiController is particularly suitable for lightning protection potential compensation for buildings of the flash protection class III and IV. The flash current-abableite power is 12.5 kA (10/350) per pole and up to 50 kA (10/350) total. The vibration-proof latching and the voltage and type coding ensure safety and avoid confusion between upper and lower parts. The wedge-shaped design of the contacts allows simple insertion and even simpler removal of the upper parts. Additional technical product information can be obtained quickly and easily via the QR code applied to the power shield.

Combinator type 1+2 for photovoltaic systems. Error-resistant Y-circuit for use according to VDE 0100-712 (IEC 60364-712). Overvoltage protection potential compensation according to VDE 0100-443 (IEC 60364-4-44). Discharge capacity up to 7 kA (10/350) and 50 kA (8/20) per pole. Low DC protection level:

Stationary ladder DEHNshield TT 2554-pole combination conductor for 230/400 V- TT and TN (C) -S systems,Width 4TEConductor type 1 + type 2 according to EN 61643-11Application-optimized use in compact electrical installationsspark gap technology with downstream current limitation Defective indicator Maximum continuous voltage: 255 V AC Protection level: Flash current (10/350): 50 kA Energetic coordination according to DIN EN 62305-4 Conductor of the Red/Line family, as well as directly to the terminal

PVC Baustellenleitung Verwendung: Für den Anschluss von Betriebsmitteln besonders auf Baustellen. In trockenen und feuchten Räumen, im Freien und in explosionsgefährdeten Betrieben.

I-SYSTEM, TITANWEISS JALOUSIESTEUERUNG KOMFORT KOMPLETTGERAET 55X55MM

Vector distributor IP65 54 space units with QucikConnect PE and N clamp small distributor plaster; Installation small plastic distributor, according to DIN VDE 0603 part 1, according to DIN 43871. For installation of devices up to 63 A according to standard DIN 43 880 with 70 mm or 85 mm installation depth, measuring voltage AC 400 V/50 Hz. Consisting of plastic base with galvanized steel profile rail, embossing for metric line insertion sleeves (top, bottom); lateral embossings for connecting sleeves for connecting two or more distributors side by side. Built-in PE/N clamps quick connector; Top with 46 mm slot. Clear view door front flush, right or left adjustable, lockable, distributor flangeable. Installation type: Aufputz Protection class: IP65 Protection class: Protection class II Number of distribution rows: 3 Number of modules: 54Assembly type:CoatingMaterial of housing:PolystyreneType of protection:IP65Protection class:Protection class IINumber of distribution rows:3Number of modules:54Number of doors:1Type of door lock:snap closureColor:stingrayHeight installed product:602 mmWide installed product:418 mmDeep Installed Product:151 mm

The following values are output via a seven-segment display with up to 7 digits: active energy (class 1), power, currents, voltages (L-L; L-N) and frequency, both per phase and total. The communication can take place via the integrated infrared interface for connecting a KNX module. The energy meter has an output. This can optionally be used as a pulse output for outputting the active energy or as an alarm output. Up to 25 alarm values (swell values with time delay) can be set here. The counter is calibrated according to MID and approved according to IEC. The installation width is 4 DIN modules.

floor temperature controller with lock, central piece, wipp switch, Berker S1 / Bfloor temperature controller with lock, central piece, windscreen switch, 2 LED and floor temperature sensor Berker S.1/B.3/B.7 white, shiny - with imprint - regulating knob with temperature range limitation - with in/off switch and 2 LED - with LED for heating and LED for night reduction - with separate connection for night reduction - for example for adjusting drives closed without current - without spreading claws - with plug clamps 10 - 50 °C, 50/60 Hz nominal voltage 250 V~ switching current 10. 1 °C night reduction approx. 5 °C Sensor line length 4 m neutral conductor required! If the temperature is below, the contact closes.

Kunstst.-Wandverteiler Modell ANIF4 IP54 320x222x114 10TE1xM25 Verschraubung oben (Kabeldurchm. 13-18mm PG21) grau2xCEE-Steckdose 16A 5p 400V abgesichert ü. 1xLS 16A 3p C4xSK-Steckdose 16A 250V IP54 abgesichert ü. 2xLS 16A 1p C1xFI 63A/4/0.03A (TYP A 40AT) über alle AusgängeLeitungsschutzschalter und FI Fabrikat Eaton ÖVE / VDEVerteiler auf Vario-Connector 5polig 10qmm verdrahtet