Safety information & warnings:
Risk of electric shock: Installation, connection and commissioning may only be carried out by a qualified electrician in accordance with the applicable installation regulations. Before working, disconnect the supply, secure it against reconnection and verify that it is de-energised.
Risk of fire: Rated current, tripping characteristic, breaking capacity and type must match the installation and the cable cross-section. Incorrectly selected devices may cause fire or personal injury.
Test residual current devices with the test button after installation and regularly thereafter.
Observe the manufacturer's operating and installation instructions. Use only as intended.
Angaben laut EU-Produktsicherheitsverordnung (GPSR):
Hersteller:
Eaton Industries (Austria) GmbH
Eugenia 1 A-3943 Schrems
Tel.: +43 (0) 50868 - 0
infoaustria@eaton.com
Eaton PLSM-C6-MW LS switch 6A/1pol/C 242200
Trigger characteristic | C | ||
Number of poles (total) | 1 | ||
Number of secured poles | 1 | ||
Rated current | A | 6 | |
Measurement voltage | V | 230 | |
Measurement switching capacity Icn according to EN 60898 at 230 V | KA | 10 | |
Measurement switching capacity Icn according to EN 60898 at 400 V | KA | 10 | |
Measurement switching capacity Icu according to IEC 60947-2 at 230 V | KA | 0 | |
Measurement switching capacity Icu according to IEC 60947-2 at 400 V | KA | 0 | |
Type of voltage | AC | ||
Energy limiting class | 3 | ||
Frequency | HZ | 50 to 60 | |
Interconnecting neutral conductor | no | ||
Suitable for underground installation | no | ||
Overvoltage category | 3 | ||
Pollution | 2 | ||
Width in division units | 1 | ||
Installation depth | mm | ANNEX | |
Additional equipment possible | yes | ||
Type of protection (IP) | IP20 |
Angaben laut EU-Produktsicherheitsverordnung (GPSR):
Hersteller:
Eaton Industries (Austria) GmbH
Eugenia 1 A-3943 Schrems
Tel.: +43 (0) 50868 - 0
infoaustria@eaton.com
