Best sellers

Legrand Safety switch TX3 according to EN 60898-1, VDE 0641-11, EN 60947-2, 3-pin with switching neutral conductor, C-characteristics, measurement current In 32 A, measurement switching capacity Icn10 kA according to EN 60898-1, measurement voltage Un 400 VAC, measurement frequency 50/60 Hz, energy limiting class 3, attachment to hat profile rail EN 607. Circuit protection switches with C-characteristics are provided for line protection in devices with high switch-on currents (e.g. motors and transformers).

Legrand Safety switch TX3 according to EN 60898-1, VDE 0641-11, EN 60947-2, 1-pole, C-characteristics, Rated current In 16 A, Rated switching capacity Icn 10 kA according to EN 60898-1, Rated voltage Un 230/400 VAC, Rated frequency 50/60 Hz, Energy limiting class 3, Mounting on hat profile rail EN 60715. Circuit protection switches with C-characteristics are provided for line protection in devices with high switch-on currents (e.g. motors and transformers).

Legrand Safety switch TX3 according to EN 60898-1, VDE 0641-11, EN 60947-2, 1-pole, C-characteristics, Rated current In 13 A, Rated switching capacity Icn 10 kA according to EN 60898-1, Rated voltage Un 230/400 VAC, Rated frequency 50/60 Hz, Energy limiting class 3, Mounting on hat profile rail EN 60715. Circuit protection switches with C-characteristics are provided for line protection in devices with high switch-on currents (e.g. motors and transformers).

Hauptleitungs-Abzweigklemme 35 mm², nach DIN VDE 0603-2 Zur Befestigung in Längs und Querrichtung auf Tragschiene 35 mm nach DIN EN 60715 Polzahl : 1 Anschlussmöglichkeiten Zugang : max. 2 x 35 mm² Anschlussmöglichkeiten Abgang : 1 Pol mit 2 Abgängen bis 25 mm² Abmessung HxBxL : 43 x 46,5 x 38,5 mm Werkstoff Isolierteil : Polyamid Werkstoff Polklemme : Messing Werkstoff Klemmschrauben : galvanisch verzinkter Stahl Temperaturbereich : -30° - 100° C Nennspannung : 400 V Farbton: lichtgrau Kleinhuis Modell-Nr. : 3549/1 EP Material___________ EP Lohn__________ Einheitspreis/Stueck

Null - und Schutzleiterklemme zum Aufschappen auf Tragschiene 35 mm nach DIN EN 60715 Klemmstellen : 7 Anschlussmöglichkeiten Zugänge : 2 x 16 mm², eindrähtige Leiter (Schraubbefestigung) Anschlussmöglichkeiten Abgänge : 5 x 10 mm², eindrähtige Leiter (Schraubbefestigung) Werkstoff Isolierteil : Polyamid Werkstoff Klemmschiene : Messing Werkstoff Klemmschrauben : galvanisch verzinkter Stahl Farbton: blau Kleinhuis Modell-Nr. : 650N/7 EP Material___________ EP Lohn__________ Einheitspreis/Stueck

iID type A / design G, according to ÖVE/ÖNORM E 8601, are made possible by modern technologies and functional properties of simpler and more efficient installations with higher safety. The VisiSafe function guarantees that the following switching elements are always safe, regardless of overvoltage conditions, wear or experience of the operators. The Acti 9 circuit breaker offers protection class 2 on the front side of the device and is the only component of its type with such high safety. The distances between device front and internal active parts are twice as large as required by the standard. In order to optimize efficiency, the error message display with the VisiTrip? function recognizes individual faults in the network, thus allowing rapid diagnosis and offers solutions for minimal downtime. This ensures continuous supply and high electrical interference safety, which is particularly important in critical energy supply, such as in hospitals or data centers. All accessories such as auxiliary contacts, reconnectors, communication interfaces, etc. are optionally available.

Mureva BOX, branch box, 8 tulle diameter 20, 105x65x55mm

Insulated end sleeves DIN 46228 part 4, halogen-free and heat-resistant up to 110°C Nominal cross-section: 2.5 mm2 Sleeve length: 12 mm Colour: blue

Insulated end sleeves DIN 46228 part 4, halogen-free and heat-resistant up to 110°C Nominal cross-section: 10.0 mm2 Sleeve length: 12 mm Colour: red

Conductor terminals for mounting on DIN rails, e.g. for small installation distributors and counters acc. WDE 0603 Clamping points: 7 or 12. Clamp: brass, cross section 6 mm x 9 mm. Screws: M5, steel, galvanized/passivated (Cr-VI-free). Housing: polyamide, impact resistant, flameproof. Corners rounded. Line connection: 1 ... 16 mm2 rigid / 1 ... 10 mm2 fine-wired with wire end sleeve (round pressing or square pressing, trapezoidal pressing up to 6 mm2) screw connection, recommended. Applying torque 1.2 Nm.- Standards / Requirements: Connecting material for low voltage circuits for household and similar purposes WDE 0613, EN 60998. Mounting: On DIN support rail according to EN 50022 / EN 60715. Nominal current: 63 A. Insulation voltages: 690 W (distributor and control cabinet inlet, degree of contamination 2). 500 W pollution level 3) Uimp = 6 kw. Touch protection: IP00 Type additive Ä-F2 –: IP20, fingerproof. Screw terminal. Combi-cross slot Z2 (positive).

Wiring bridges AE/AE. For wiring of LS,- FI,- and similar switching devices. For example, for installation small distributors and counter positions according to WDE 0603. EN 60439-1 / WDE 0660, part 500. WDE 0100, part 523: 6 mm2: max. 54 A, 10 mm2: max. 73 A. Rated voltage: 450 / 750 W. Insulation material: PWTSC (type of lead H07V-K). Head: Flexible. Cable end: Aderend sleeve on both sides. Color: blue. Minimum order quantity: 1 piece length: 133 mm cross section: 10 mm2

Shrink hoses, medium-walled With adhesive inner coating, shrinkage rate 4:1, resistant to oils, fats, acids, alkalis, salts, solvents and UV rays, wall thickness 2.5 mm, silicone-free, impact strength: 25 kV/mm Colour: black Length: 1 m Operating temperature range: -40 - 120 °C With internal adhesive: Yes Shrink rate: 3:1 Shrinkage strength: 22 - 6 mm