Best sellers

for clamps up to 16 mm2suitable for all formwork typesBox rear parts with mount for support elementfor loose clamps up to 4 mm2Length: 128 mmWidth: 128 mmDepth: 80 mmIntroduction fields: 8 Number of parts: 2 possible EN pipe sizes per field of introduction: 4 x Ø 16 mm, 3 x Ø 20 mm, 1 x Ø 25 mm, 1 x Ø 32 mm, 1 x Ø 40 mm:

Pipe introduction limitation to avoid internal pipe shorteningsuitable for all formwork typesmax. Loading of the light hooks according to DIN EN 60670 (50 N)Depth: 99 mmExhaust opening Ø: 60 mmImpact clutches M20/M25: 4 Opening opening M20/M25: 2 Opening opening M25/M32: 2 Number of parts: 2 Screw domes for device mounting: 4

For the assembly of the EC Euro-Clip clamp on all subsurface types DM Insulation tube 25 mm with the aid of the ESD Euro plug, the EC clamp in concrete and brick with the EDV Euro-rotation lock in the slot on thin sheets or cable trays with the ESV Euro-Steck trim in the round hole on thin sheets or cable trays with the DHI Insulation holder. ESV Euro-Steck Locking) and separated again by simple breaking without destruction by the functional plug-in system can also connect several EC Euro clips in different sizes light grey PS silicone-free temperature range: -10 °C to +80 °C

Hager KB663KT Cam rail with pin connection 4P 63A 10mm2 13M

Conductor terminals for mounting on DIN rails, e.g. for small installation distributors and counters acc. VDE 0603. 35/25 mm2. 1-pole. Classy. Mounting on 35 mm support rail according to. EN 60715 / EN 50022. Installation small distributor and counter positions AC 400V. Main line branch terminals VDE 0603-2, connection material for low voltage circuits for household and similar purposes VDE 0613, Part 1 / EN 60998-1. Color coding corresponding to valid vein colors. Mounting horizontally or vertically. Insulation voltage: 1000 V AC / DC for: Overvoltage category III (Uimp = 8 kV, fixed installation), level of contamination 2 (e.g. distributor installation). VDE certified (VDE 0613, Part 1 / EN 60998-1): Test current 125 A. Suitable for Cu and Al conductors. Clamp: brass (galvanized). Clamp screws: steel, galvanized. Insulation housing: plastic (polyamide), impact-resistant, flame-resistant, halogen-free. Line connection: - Main line: 10 - 35 mm2 rigid/multi-wire, 3.5 Nm - branch line: 1.5 - 25 mm2 rigid/multi-wire, 2.5 Nm - stripping length: 25 mm. Inputs max. 35 mm2: 2. Outputs max. 25 mm2: 6. Bushing clamp with 2 screws per clamping point, screws with combination slot Pozidriv Z2. Corners rounded. miter protection: IP20, fingerproof

Schuko socket, version according to VDE, ÖVE, Modular displaceable L/N, screw fastening possible, width 2.5TE, railing block Z7-SD/1P+N 10 mm2

Datenkabel Kat.5e F/UTP 4x2xAWG24/1 PVC 100m



Einsatzgebiete Primär (Campus), Sekundär (Riser), Tertiär (Horizontal) IEEE 802.3: 10Base-T; 100Base-T; 1000Base-T; IEEE 802.5 16 MB; ISDN; TPDDI; ATM Geltende Normen EN 50173-1; EN 50288-2-1 ISO/IEC 11801; IEC 61156-5 TIA/EIA-568-B.2 Flammwidrigkeit PVC: IEC 60332-1 LSHF(FRNC): IEC 60332-1; IEC 60754-2; IEC 61034 LSHF-FR(FRNC-C): zusätzlich IEC 60332-3 -24 Kabelaufbau Leiter Cu-Draht, blank Ø 0,51 mm (AWG24) Isolierung Polyethylen, Ø 1,1 mm Verseilung 2 Adern zum Paar Verseilung zur Seele 4 Paare zur Seele Gesamtschirm Aluminium-beschichtete Kunststoff-Verbundfolie, Beidraht AWG26 verzinnt Schutzmantel PVC oder LSHF(FRNC), grau RAL 7035 Duplexmantel: zwei Kabel parallel mit Trennsteg Mechanische Eigenschaften Biegeradien ohne Zugbelastung 25 mm mit Zugbelastung 50 mm Betriebstemperaturenbereich ruhend -20°C bis + 60°C bewegt 0°C bis + 50°C






Schleifenwiderstand 190 Ω/km Widerstandsunsymmetrie  2% Isolationswiderstand (500 V) 2000 MΩxkm Kapazität bei 800 Hz Nom. 48 nF/km Kapazitätsunsymmetrie (Paar/Erde)  1500 pF/km Mittlerer Wellenwiderstand 100 MHz 100 ± 5 Ω Relative Ausbreitungsgeschwindigkeit ca. 67% Signallaufzeit  535 ns/100 m Laufzeitunterschied 20 ns/100 m Prüfspannung (DC, 1 min) Ader/Ader und Ader/Schirm 1000 V Kopplungswiderstand bei 1 MHz  50 mΩ /m bei 10 MHz 100 mΩ /m bei 30 MHz  200 mΩ /m Kopplungsdämpfung  55 dB

Number of poles (total)



2



Number of secured poles



1



Measurement voltage


V
230



Rated current


A
16



Measurement error current


A
0.03



Error current type



-



Energy limiting class



3



Dimensional switching capacity according to EN 60898


KA
10



IEC 60947-2 rated


KA
0



Frequency



50 Hz



Trigger characteristic



C



Interconnecting neutral conductor



yes



Overvoltage category



3



Pollution



2



Width in division units



2



Installation depth


mm
70



Suitable for underground installation



no



Type of protection (IP)



IP20



Impact resistance


KA
3



Type of voltage



AC



Missing trigger protection



yes

Eine nähere Beschreibung finden Sie auf der Herstellerhomepage.

I-SYSTEM, TITANWEISS WIPPE MIT SYMBOL GLOCKE FUER TASTER, 55X55MM

Plug 16A 5p 6h TWIST, with screw-free connection technology IP44IEC current intensity 16 ANumber 5Voltage according to EN 60309-2 400 V (50+60 Hz) redTime position 6 hCharacteristicsPhase changer noProtection (IP) IP44Connection technology screwless clampCable introduction screw connectionPlug-in direction straightMaterial plastic

The strip distributors allow for the installation of 45mm row mounting devices. They consist of the two flame-retardant plastic profile strips (terminal cover strips) KLV-LV-PL and the two side plates KLV-LV-SP with inserted retaining plates. Plastic Color: RAL 7035 side panels, RAL 7040 profile strip. Mounting takes place on the hat rail according to IEC/EN 60715.