Best sellers

Eine nähere Beschreibung finden Sie auf der Herstellerhomepage.

PVC Elektroisolierband für alle normalen Isolierarbeiten, u. a. Reparatur beschädigter Isolationen, Umwickeln von Kabelenden und Abzweigungen. VDE, EN 60454 -10 bis 105°C, 10 x 15mm, Länge 10m

I-SYSTEM, TITANWEISS SCHUKO-STECKDOSE 10/16A 250V M.SCHRAUBENLOSEN ANSCHL.KLEMMEN MIT KLAPPDECKEL 55X55MM U.ERHOEHTEM BERUEHRUNGSSCHUTZ

Dietzel AZR 85 Record branching frame white Ø85mm 000807

Main line branch terminals 25/16 mm2, 1-pole. Classy. Mounting on 35 mm support rail according to. EN 50022 / EN 60715. e.g. for installation small distributors and counter positions according to. WDE 0603. Installation small distributor and counter positions AC 400W. Main line branch terminals WDE 0603-2, connection material for low voltage circuits for household and similar purposes WDE 0613, Part 1 / EN 60998-1. Color coding corresponding to valid vein colors. Mounting horizontally or vertically. Voltage: 1000 W. WDE certified. Suitable for Cu and Al conductors. Inputs max. 25 mm2: 2nd outputs max. 16 mm2: 2nd clamping body: brass, (galvanized). Clamp screws: steel, galvanized. Insulation housing: plastic, (polyamide) impact-resistant, halogen-free. Main line 1.5 - 25 mm2 rigid/several, 2.5 Nm. branch line: 1.5 - 16 mm2 rigid/multiplier, 2 Nm. Stripping length 16 mm. Bushing clamp with 2 screws per clamping point screws with combination slot Pozidriv Z2. IP 20, fingerproof. Corners rounded. Number of poles: 1 colour: green

I-SYSTEM DICHTUNGSSATZ IP44 F.SCHALTER- UND TASTERWIPPEN F.SERIENSCHALTER U.DOPPELTASTER (1 SATZ = 4 EINZELDICHTUNGEN)

Switching units 10 A 250 V~ Plug-in clamps Clamp area for information lines from line diameter 0.5 mm, for copper conductors 1.5 mm2 and 2.5 mm2 universal switch (exchange switch)

NETZ-0-NOTSTROM Switch, 4 pole, RE, Ith: 63 A, P: 22 kW(AC-23,400V), wire cross section 25 mm2 FOLLOWING TYPE KA63B.K950.VE2.F437 70024348

Number



4



Measurement voltage


V
400



Rated current


A
40



Measurement error current


A
0.03



Assembly type



DIN rail



Error current type



AC



Selective type



no



Short-circuit strength (Icw)


KA
10



Impact resistance


KA
0.25



Frequency



50 Hz



Additional equipment possible



yes



Type of protection (IP)



IP20



Size (according to DIN 43880)



1



Width in division units



4



Installation depth


mm
ANNEX



Short-term delayed type



no

Switching device for the voluntary or tariff current limitation of consumer equipment, version according to EN/IEC 60898-1, EN/IEC 60947, EVU-approbated, easy to switch on from the current customer, setting screw under a sealable cap

The cable branch boxes consist of a thermoplastic polypropylene with plug-in seals made of ethylene vinyl acetate EVA. Lines can be installed directly through the 7 x M25 seals, or the seals are cut in with a knife at the intended points in order to produce an insertion opening for pipes or pipes. Alternatively, cable screw connections can be plugged through the openings instead of the seals and can be constricted from the inside with a counter nut. The cable branch boxes can be equipped with sheet metal screws 3,5x9,5 in openings on the floor mounted on mounting plates. Lights internal dimensions: 100x100x48 Cover with labeling field and sealable.

Plastic cable marker, for cables of 10 to 25 mm diameter, label with plug-in strip ESL..., EST... or large sheet ES/LP-BW-GB, font size: 29 x 8 mm