Best sellers

IP55Nennial voltage: 250 V ACSwitching current: 10 AXOperating temperature: -40/60 °Cwith full-surface seal on the rear side of the housing for rear line introduction and cleaning compensation with 2 snap-in places for Wago 2-wire connection clamps in housing bottom with Wago 2-wire connection terminal with an introduction for 2 lines and an introduction for pipe or pipe with connectors ZAMAK quick release pins.
AP

IP55Nennial voltage: 250 V ACRated current: 16 AOperating temperature: -40/60 °CConnection terminals: according to VDE 0620-1with full-surface seal on the rear side of the housing for rear line introduction and cleaning compensation with falling flap cover, manually lockable with 2 snap-in places for Wago 2-wire connection clamps in housing bottom with Wago 2-wire connection terminal for horizontal mounting 2 additional lateral line introductions with an introduction for 2 lines and an introduction for pipe or pipe Wired inserts with connectors Due to the lateral line introductions, particularly suitable for mounting via work benches. Stainless steel hinged cover springs, pins of the ZAMAK quick release. grey/light grey matt 4 line introductions
AP

Framework Berker S.1 polar white, matt
Frame 3x S.1 polar white, matt - for vertical and horizontal mounting

Schneider A9P54613 ACTI9 Circuit breaker 1+N C-Char 13A

2x horizontal outlet, 16 A 250 V~, color: light/basal grey; prewired; for splash mounting, protection class IP 44, with two line inlets; Plug-in clamps: clamping area for copper conductors 1.5 mm and 2.5 mm, connection clamps according to VDE 0620

Material: Nylon, natural color, fast and easy to attach with a tool or hand. Extremely resistant to seawater, oil, fats and the like, manufactured according to UL according to tested nylon. Mil.-Spec. Conditions, - 40° C to 85° C(100 pieces)

The V20 overvoltage arrester made of halogen-free plastic is suitable for overvoltage protection potential compensation according to VDE 0100-443 (IEC 60364-4-44). A dynamic separation device and optical status display characterize the modularly pluggable arresters. The NPE variant is additionally equipped with a highly loadable spark gap between zero and protective conductors. The SurgeController is particularly suitable for potential equalization in main and lower distributions, depending on the type in the ranges of TN, TT networks. Thanks to the high performance varistors, the leakage capacity is up to 40 kA (8/20) per pole. The vibration-proof latching and the voltage and type coding ensure safety and avoid confusion between upper and lower parts. The wedge-shaped design of the contacts allows simple insertion and even simpler removal of the upper parts. Additional technical product information can be obtained quickly and easily via the QR code applied to the power shield.

Plug and adhesive sleeve, light grey similar to RAL 7037, dense, made of halogen-free base material, non-flammable, for medium mechanical stress, for flexible and rigid electrical installation tubes

Material: Nylon, natural color, fast and easy to attach with a tool or hand. Extremely resistant to seawater, oil, fats and the like, manufactured according to UL according to tested nylon. Mil.-Spec. Conditions, - 40° C to 85° C(100 pieces)

MSR-Installationskabel 100 Meter mit statischem Schirm Europäischer Installations Bus Verwendung: Zur Verlegung auf und unter Putz in trockenen, feuchten und nassen Räumen sowie im Freien (bei geschützter Verlegung) in Stark- und Schwachstromanlagen, als BUS-Leitung (EIB-Installationsbus) sowie als MSR-Leitung in Starkstromanlagen. Die Übertragung von Messwerten, der Einsatz in der Prozeßdatenverarbeitung sowie die Verwendung im Bereich der Steuer- und Regeltechnik sind die Hauptanwendungsgebiete dieser Leitung.

Bemessungsstrom: 35 ABemessungsspannung: 400 VPolzahl: 3Baugröße: D02

Main line branch terminals 25/16 mm2, 1-pole. Classy. Mounting on 35 mm support rail according to. EN 50022 / EN 60715. e.g. for installation small distributors and counter positions according to. VDE 0603. Installation small distributor and counter positions AC 400V. Main line branch terminals VDE 0603-2, connection material for low voltage circuits for household and similar purposes VDE 0613, Part 1 / EN 60998-1. Color coding corresponding to valid vein colors. Voltage: 1000 VDE certified. Suitable for Cu and Al conductors. Inputs max. 25 mm2: 2. Outputs max. 16 mm2: 4. Clamp body: brass, (galvanized). Clamp screws: steel, galvanized. Insulation housing: plastic, (polyamide) impact-resistant, halogen-free. Main line 1.5 - 25 mm2 rigid/several, 2.5 Nm. branch line: 1.5 - 16 mm2 rigid/multiplier, 2 Nm. Stripping length 16 mm. Bushing clamp with 2 screws per clamping point screws with combination slot Pozidriv Z2. IP 20, fingerproof. Corners rounded. Number of poles: 1 Colour: grey