Best sellers

sliding nut for use with profile rails CM3015, CM3518 and AM3518 100 pieces

50 pieces Also suitable as cavity dowels, with collar against slipping. 3 applied fins take up the torque. Required minimum screw length = dowel length + component thickness + 1 x screw Ø. Extraction value applies to wood screws with the largest screw diameter in the concrete of class B25. Our security rating recommendation: 5-fold

Folding clamp for sheet thickness up to 10 mm, line guide transverse and parallel to the sheet metal. In accordance with the requirements of VDE 0185-305 (IEC 62305).

bumper connectors for gratings in screwed design, for straight connections of grating channels and for the production of molded parts, inclusive flat round screw FRS M6 x 20 with combination nut.

Combinator type 1+2 for photovoltaic systems. Error-resistant Y-circuit for use according to VDE 0100-712 (IEC 60364-712). Overvoltage protection potential compensation according to VDE 0100-443 (IEC 60364-4-44). Discharge capacity up to 7 kA (10/350) and 50 kA (8/20) per pole. Low DC protection level:

The upper part of the V20 overvoltage arrester made of halogen-free plastic is suitable for overvoltage protection potential compensation according to VDE 0100-443 (IEC 60364-4-44) and serves as a substitute for the V20 SurgeController. A dynamic separation device as well as an optical status display characterize the modularly pluggable arresters. Thanks to the high performance varistors, the leakage capacity is up to 40 kA (8/20) per pole. The vibration-proof latching and the voltage and type coding ensure safety and avoid confusion between upper and lower parts. The wedge-shaped design of the contacts allows simple insertion and even simpler removal of the upper parts. Additional technical product information can be obtained quickly and easily via the QR code applied to the power shield.

The V20 overvoltage arrester made of halogen-free plastic is suitable for overvoltage protection potential compensation according to VDE 0100-443 (IEC 60364-4-44). A dynamic separation device and optical status display characterize the modularly pluggable arresters. The NPE variant is additionally equipped with a highly loadable spark gap between zero and protective conductors. The SurgeController is particularly suitable for potential equalization in main and lower distributions, depending on the type in the ranges of TN, TT networks. Thanks to the high performance varistors, the leakage capacity is up to 40 kA (8/20) per pole. The vibration-proof latching and the voltage and type coding ensure safety and avoid confusion between upper and lower parts. The wedge-shaped design of the contacts allows simple insertion and even simpler removal of the upper parts. Additional technical product information can be obtained quickly and easily via the QR code applied to the power shield.

The V20 overvoltage arrester made of halogen-free plastic is suitable for overvoltage protection potential compensation according to VDE 0100-443 (IEC 60364-4-44). A dynamic separation device and optical status display characterize the modularly pluggable arresters. The SurgeController is particularly suitable for potential equalization in main and lower distributions, depending on the type in the area of TN networks. Thanks to the high performance varistors, the leakage capacity is up to 40 kA (8/20) per pole. The vibration-proof latching and the voltage and type coding ensure safety and avoid confusion between upper and lower parts. The wedge-shaped design of the contacts allows simple insertion and even simpler removal of the upper parts. Additional technical product information can be obtained quickly and easily via the QR code applied to the power shield.

Overvoltage arresters type 2 for photovoltaic systems. Error-resistant Y-circuit for use according to VDE 0100-712 (IEC 60364-712). Overvoltage protection potential compensation according to VDE 0100-443 (IEC 60364-4-44). Discharge capacity up to 40 kA (8/20) per pole and low DC protection level:

Corrosion-protection binders for covering surface and underground compounds. It consists of petrolatum-coated synthetic fibre fleece with a material thickness of about 1.1 mm. The anti-corrosion binding can be processed cold.

Protection class IP54, rated voltage 660 V, nominal cross section mm2, 2 fastening holes for screws up to 6 mm Ø on the outside of the box, 4 lid screws, 10 breakable inserts with thread M20 x 1,5, preferably for cable fittings with short connection thread. Dimensions: 136 x 111 x 57 mm lights internal dimensions: 125x100x44 by mm.

H1Z2Z2-K Solar-Leitungen sind bestimmt für den frei beweglichen und frei hängenden Einsatz, für feste Verlegung in PhotovoltaikStromerzeugungssystemen. Sie sind geeignet für den Einsatz in und an schutzisolierten Geräten und Anlagen (Schutzklasse II), sowie in explosionsgefährdeten Bereichen. Sie dürfen sowohl im Innenraum, im Freien, in der Industrie und in gewerblichen und landwirtschaftlichen Betrieben eingesetzt werden. Verlegung in Kabelrinnen, im Rohr, auf und unter Putz ist zugelassen. H1Z2Z2-K Leitungen sind geeignet für die Erdverlegung. Die Leitungen sind ausgelegt für den Betrieb mit einer maximalen Leitertemperatur von 90°C, jedoch ist eine maximale Leitertemperatur von 120°C bei einer maximalen Umgebungstemperatur von 90°C für eine Dauer von höchstens 20.000 Stunden zugelassen.