Best sellers

ABB Phase rails enable secure and economical cross-wiring of automatic fuses, fault current protection devices and other modular installation devices. The following must be taken into account for a correct phase rail selection: terminal type (double terminal or cage terminal), number of terminals (1, 2, 3, 4, 1+N or 3+N), type of device (automatic, fault current protection devices or modular installation devices), combinations of the different types of device, use of automatic fuses with auxiliary switches mounted on the right and the bottom, phase rail connection cross-section (current loadability), number of modules (extractable phases)Product description on the Manufacturer page

For the protection of consumer equipment against transient overvoltages caused by indirect flashes and switching operations, test class II according to IEC 61643-1+A1, SPD type T2 according to EN 61643-11, auxiliary switch SPC-S-HK for remote control, displaceable with all Xtra Combination switching devices

Eaton PLSM-B6/3N-MW LS 6A/3-pol+N/B 10kA 242511

In addition to a wide range of front elements, the RMQ-Titan product range includes the right contact elements here. An essential differentiation feature is, inter alia, mechanically with the fastening type (front, floor) and the connection technology (spring clamp or screw technology).

Installation systems for all application requirements in housing, and purpose construction such as: switching of lighting systems, switching of electric heaters, switching of air conditioning systems, fans, switching of heat pumps, switching of roller shutters and blinds etc., advantages safety:, front-side switching position indicator, compact design, generously dimensioned clamping rails, low switching noise, non-brushing materials

This article can also be used as a release auxiliary switch for the circuit breakers NZM.../NS... and the load disconnectors N.../PN....

Connection clamp system ST, BP, OMEX and LightEarth, on round conductor Rd 8-10, incl. connector 5001/DIN.

The Ratelle cable channel system Magic (RKSM) is the world's first completely screwless channel system. The RKSM has a beaded longitudinal bottom hole 7 x 20 mm for boom mounting. From width 200 mm, a cross-sicking improves 7 x 32 mm cable ventilation and facilitates assembly. The center hole 11 mm allows direct threaded rod suspension and a continuous side hole 7 x 20 mm serves as a connector hole. All system components and channel types are equipped with the innovative Magic connector, from the channel to the molding. The combination of both advantages makes assembly easier and more time-saving. The continuous potential compensation is guaranteed without additional components. The Magic longitudinal connector set (to order separately) allows the combination of the Magic cable channels with conventional OBO cable channels of the same width. The magnetic shield attenuation is 20 dB without lid and 50 dB with lid. Tested and approved in functional maintenance systems of classes E30 to E90 according to DIN 4102 part 12. Remove assembly variants and approval data from usability certificates.

The V50 lightning current combination conductor made of halogen-free plastic is suitable for lightning protection potential compensation according to VDE 0185-305 (IEC 62305). A dynamic separation device and optical status display characterize the modularly pluggable arresters. The CombiController is particularly suitable for lightning protection potential compensation for buildings of the flash protection class III and IV. The flash current-abableite power is 12.5 kA (10/350) per pole and up to 50 kA (10/350) total. The vibration-proof latching and the voltage and type coding ensure safety and avoid confusion between upper and lower parts. The wedge-shaped design of the contacts allows simple insertion and even simpler removal of the upper parts. Additional technical product information can be obtained quickly and easily via the QR code applied to the power shield.

The cable branch boxes consist of a thermoplastic polypropylene with plug-in seals made of ethylene vinyl acetate EVA. Lines can be installed directly through the 9 x M25 7 x M32 seals, or the seals were cut in with a knife at the intended locations to produce an insertion opening for pipes or pipes. Alternatively, cable screw connections can be plugged through the openings instead of the seals and can be constricted from the inside with a counter nut. The cable branch boxes can be equipped with sheet metal screws 3,5x9,5 in openings on the floor mounted on mounting plates. Lights internal dimensions: 225x173x86 Cover with labeling field and sealable.

Hole band in corrugated form, in practical unrolling box.

YE 6 mm² H07V-U (starr) PVC Aderleitung 100 MeterLieferlänge 100 M Leiter-PVC Aderleitung Verwendung: In trockenen Räumen, in Schalt- und Verteileranlagen zur Verlegung im Rohr auf und unter Putz sowie ohne Rohr auf geeigneten Isolierkörpern.