Best sellers

Flexmuff, grey similar to RAL 7037, infgest and dense, made of halogen-free base material, non-flammable, for medium mechanical stress, for flexible electrical installation pipes for tight and tensile connection of pipes

Wipp cross switch insert

Smoke detector Standard KRIWAN Q, 3V DC, white. Smoke detectors with small size and attractive design language according to DIN EN 14604 with additional certification according to the increased testing requirements of Q certification based on vfdb guidelines 14-01 “Vereinigung zur Förderung des deutschen Brandschutz” (vfdb). Increased test criteria against the penetration of foreign bodies and increased protection against damp heat, oxidation and EMC, as well as better temperature change stress. Serves for early detection signaling fires with smoke development in the interior. Processor-controlled function self-test (all 10 sec.) and PGSA technology with independent algorythmic night-riggering when disturbing influences occur, such as dust, to maintain functional safety. Large function and reset button through the entire upper cover of the detector. Acoustic signal (85 dB at 3 m) and red flashing LED for alarming. Acoustic signal for battery wake, pollution or interference with acoustic signaling and yellow LED. Timely limited deactivation function of the smoke detection for suppression of deception alarms of the detector for approx. 12 minutes with automatic reset function in normal operation. Error messages can be delayed by 8 hours for 7 days by acknowledgement on the reset button. The fault of a contaminated detection unit cannot be reset as long as the fault message continues to exist in the evaluation unit. Ceiling mounting or wall mounting according to DIN14676. The detector has a camping/caravan registration. Disassembly and theft protection can be activated, then unlocking only with screw rotation with max. Size of 7mm possible. When turning into the socket, the detector is automatically activated.

FI-Schutzschalter, 4-polig, Typ A, In: 40 A, 30 mA, Un AC: 400 V, mit thermischem Überlastschutz

FI/LS-Schalter, 10 kA, 1P+N, Typ A, kurzzeitverzögert G, 30 mA, B-Char, In: 13 A, Un AC: 230 V

FI/LS-Schalter, 10 kA, 1P+N, Typ F, kurzzeitverzögert K, 30 mA, B-Char, In: 16 A, Un AC: 230 V

Anschluss,- und Verbindungskabel IEEE 802.3: 10Base-T; 100Base-T; 1000Base-T; IEEE 802.5 16 MB; ISDN; TPDDI; ATM Geltende Normen EN 50173-1; EN 50288-5-2 ISO/IEC 11801; IEC 61156-6 TIA/EIA-568-B.2 Flammwidrigkeit LSHF(FRNC): IEC 60332-1; IEC 60754-2; IEC 61034 Kabelaufbau Leiter Cu-Litze, blank Ø 0,42 mm (AWG27) Isolierung Foam-Skin Polyethylen, Ø 0,98 mm Verseilung 2 Adern zum Paar Verseilung zur Seele 4 Paare zur Seele Paarabschirmung Aluminium-beschichtete Kunststoff-Verbundfolie, patentierte Bewicklung um jeweils zwei Paare, Beilauflitze AWG26 verzinnt Schutzmantel LSHF(FRNC) Mechanische Eigenschaften Biegeradien ohne Zugbelastung 25 mm mit Zugbelastung 50 mm Betriebstemperaturenbereich ruhend -20°C bis + 60°C bewegt 0°C bis + 50°CSchleifenwiderstand 340 Ω /km Widerstandsunsymmetrie 3% Isolationswiderstand (500 V) 2000 MΩ *km Kapazität bei 800 Hz Nom. 43 nF/km Kapazitätsunsymmetrie (Paar/Erde)  1500 pF/km Mittlerer Wellenwiderstand 100 MHz 100 ± 5 Ω Relative Ausbreitungsgeschwindigkeit Ca.79 % Signallaufzeit 427 ns/100m Laufzeitunterschied  12 ns/100m Prüfspannung 1000 V Kopplungswiderstand bei 1 MHz  50 mΩ /m bei 10 MHz  100 mΩ /m bei 30 MHz 200 mΩ /m Kopplungsdämpfung  55 dB

Material: Nylon, natural color, fast and easy with a tool or
by hand. Extremely resistant to sea water, oil, fats
etc., manufactured according to UL according to tested nylon.
Mil.-Spec. Conditions, - 40° C to 85° C
Cable connector(100 pieces)

End sleeves DIN colour series
• isolated
• Electrolyte copper, galvanized
• Dimensions according to DIN 46228. Part 4
• Color series III, DIN series(100 pieces)

Twin end sleeves for two conductors, DIN • Electrolyte copper pipe section • Galvanized • PP plastic collar • heat resistant up to 105°C(100 pieces)

Color series I (French)
• isolated
• Electrolyte copper, galvanized
• Dimensions according to DIN 46228. Part 4
• Colour series I, French(100 pieces)

Color series III, DIN
• isolated
• Electrolyte copper, galvanized
• Dimensions according to DIN 46228. Part 4(100 pieces)