Eltako

Radio actuator heating-cooling relay for can installation, 1 closer potential-free 10A/250V AC. Stand-by loss only 0.3-0.8 watts. For installation. 45mm long, 55mm wide, 33mm deep. Supply voltage 230 W or 8 to 24 W UC. Radio actuator heating cooling relay 230W. 1 Locker potential-free 10A/250V AC. Stand-by loss only 0.8 Watt. Encrypted radio, bidirectional radio and repeater function can be switched on. For installation. 45mm long, 45mm wide, 33mm deep. If the supply voltage fails, the switching state is maintained. When the supply voltage is recurring, it is switched off in a defined manner. After installation, wait for the automatic short synchronization before the switched consumer is placed on the network. This heating-cooling relay evaluates the information from radio temperature controllers or sensors. Optionally complements window door contacts, motion detectors, hoppe window handles and radio buttons. Valves are controlled with the potential-free working contact. From the manufacturing week 11/14, encrypted sensors can be learned. Bidirectional radio and/or a repeater function can be switched on. Each function change (normal operation, lowering operation, out) is confirmed with a radio telegram. This radio telegram can be learned in the GFVS software. Upper rotary switch for operating modes. The LED accompanies the learning process according to the user manual and displays radio control commands during operation by short flashing. Mounting type: Approval Radio frequency: 868 Mhz Colour: blue Material: plastic Halogen-free: Yes Material quality: thermoplastic Finishing of surface: matt Suitable for dimmer: No Suitable for pulse pushers: No Suitable for roller shutter switch: No Suitable for switch: No In the case: Yes In the tube socket housing: No As module/plate: No Touch operation: No Switching operation: No With radio hand switch: Yes

Radio power surge relays for installation in the 230 V power supply line, 1 closer not potential-free 16 A/250 W AC, incandescent lamps 2000 W, with light scene control via PC or with radio driver, encrypted radio, bidirectional radio and repeater function connectable, stand-by loss only 0.8 Watt power surge relay 1 closer not potential-free 16A/250V AC, incandescent lamps. With light scene control via PC or with radio buttons. Encrypted radio, bidirectional radio and repeater function can be switched on. Stand-by loss only 0.8 Watt. Mounting into the 230V power supply line, for example in intermediate ceilings and luminaires. 166mm long, 46mm wide and 31mm deep. With cable load. If the supply voltage fails, the switching state is maintained. When the supply voltage is recurring, it is switched off in a defined manner. Scene control: With one of the four control signals of a pushbutton learned as a scene scanner with a double rocker, a plurality of FSR71NP can be switched on or off to one scene in each case. Central commands on the PC are sent with the building radio visualization and control software GFVS. Learn one or more FSR71NP on the PC. With the rotary switches, the probes are learned and, if necessary, the device is tested. For normal operation, the middle and lower rotary switches are then set to AUTO. The LED under the upper rotary switch accompanies the learning process according to operating instructions and displays control commands during operation by short flashing. Number of relays: 1 Number of commands: 32 Material quality: Thermoplastic Finishing of the surface: matt Suitable for dimmer: No Suitable for pulse pushers: Yes Suitable for roller shutter switches: No Suitable for switches: Yes In the case: Yes In the tube socket housing: No As module/plate: No Tasting operation: Yes Switching operation: Yes With radio hand transmitter: Yes

Radio actuator power surge relays for can installation, installation and AP mounting, 1 closer not potential-free 10 A /250W AC, incandescent lamps 2000 W, reverse deceleration with switch-off warning and push-button continuous light can be switched on, stand-by loss only 0.8 W radio actuator power surge relay 230W. 1 Locker not potential-free 10A/250V AC, incandescent lamps 2000 Watt, fallback delay with switch-off warning and button permanent light can be switched on. Encrypted radio, bidirectional radio and repeater function can be switched on. Stand-by loss only 0.8 Watt. For installation. 45mm long, 45mm wide, 33mm deep. If the supply voltage fails, the switching state is maintained. When the supply voltage is recurring, it is switched off in a defined manner. After installation, wait for the automatic short synchronization before the switched consumer is placed on the network. In addition to the radio control input via an internal antenna, this radio actuator can also be controlled locally by means of a conventional 230V control probe mounted beforehand. A glow lamp current is not permitted. Encoded sensors can be learned. Bidirectional radio and/or a repeater function can be switched on. Each state change and the central control telegrams received are then confirmed with a radio telegram. This radio telegram can be taught in other actuators, the GFVS software and in universal displays. Scene control: A plurality of FSR61 can be switched on or off to form a scene with one of the four control signals of a pushbutton learned as a scene scanner. With the upper rotary switch, up to 35 radio buttons are assigned in the LRN position, one or more central control buttons thereof. In addition, radio window door contacts with the function closer or opener with opened window, radio-outside brightness sensors FAH and radio motion detector FBH. Then the desired function of this current surge switch

Radio actuator power surge relays for installation and AP installation, 1 locks potential-free 10 A /250W AC, incandescent lamps 2000 Watt, power surge switches with reverse deceleration, switch-off pre-warning and pushbutton continuous light can be switched on, stand-by loss 0.9 Watt 1 locks potential-free 10A/250V AC, incandescent lamps 2000 Watt, fall delay with switch-off pre-up and pushbutton. Encrypted radio, bidirectional radio and repeater function can be switched on. Stand-by loss only 0.8 Watt. For installation. 45mm long, 45mm wide, 33mm deep. If the supply voltage fails, the switching state is maintained. When the supply voltage is recurring, it is switched off in a defined manner. After installation, wait for the automatic short synchronization before the switched consumer is placed on the network. In addition to the radio control input via an internal antenna, this radio actuator can also be controlled locally by means of a conventional control probe mounted in front of it. A glow lamp current is not permitted. Encoded sensors can be learned. Bidirectional radio and/or a repeater function can be switched on. Each state change and the central control telegrams received are then confirmed with a radio telegram. This radio telegram can be taught in other actuators, the GFVS software and in universal displays. Scene control: A plurality of FSR61 can be switched on or off to form a scene with one of the four control signals of a pushbutton learned as a scene scanner. With the upper rotary switch, up to 35 radio buttons are assigned in the LRN position, one or more central control buttons thereof. Material quality: Thermoplastic Finishing surface: matt Suitable for dimmer: No Suitable for pulse pushers: Yes Suitable for roller shutter switch: No Suitable for switch: Yes In the case: Yes In the tube socket housing: No As module/plate: No button operation: Yes Switch operation

Tip-Funk button actuators UP-Funk button actuator with rocker and frame. For single mounting 80x80x15/33mm
or assembly into the 55s switch system. Pure white glossy
power surge switches with a lock, not potential-free,
230V bulbs and halogen lamps 1000W, ESL and 230V LED lamps up to
200W.

Tip-Funk button actuators UP-Funk button actuator with rocker and frame. 84x84x16mm
or assembly into the e-design switch system. Pure white glossy
power surge switches with a lock, not potential-free,
230V bulbs and halogen lamps 1000W, ESL and 230V LED lamps up to
200W.

Radio actuator multifunction power surge switch For installation and AP mounting. 1 lock, potential-free 10 A /250W AC, light bulbs 2000 Watt. Stand-by loss only 0.8 Watt. With the upper rotary knob several different time functions can be selected. 45 mm long, 55 mm wide, 33 mm deep. Radio actuator multifunction time relay 230W. 1 lock potential-free 10A/250V AC, light bulbs 2000 Watt*. Encrypted radio, bidirectional radio and repeater function can be switched on. Stand-by loss only 0.8 Watt. For installation. 45mm long, 45mm wide, 33mm deep. Supply and control voltage locally 230W. If the supply voltage fails, the switching state is maintained. When the supply voltage is recurring, it is switched off in a defined manner. This radio actuator has the most modern hybrid technology we have developed: We have combined the wear-free reception and evaluation electronics with a bistable relay. As a result, there is no coil loss power and no heating as a result even in the switched-on state. After installation, wait for the automatic short synchronization before the switched consumer is placed on the network. In addition to the radio control input via an internal antenna, this radio actuator can also be controlled locally by means of a conventional control probe installed in front of it. A glow lamp current is not permitted. From the manufacturing week 11/14, encrypted sensors can be learned. Bidirectional radio and/or a repeater function can be switched on. Any change in state as well as the central control telegrams received are confirmed with a radio telegram. This radio telegram can be taught in other actuators, the GFVS software and in universal displays. With the upper rotary switch, up to 35 radio buttons can be assigned in the LRN position, one or more central control buttons thereof. Radio window door contacts (FTK) with the function Locker or Open

Radio actuator power surge relays for installation and AP installation, 1 locks potential-free 10 A /250W AC, incandescent lamps 2000 Watt, power surge switch with reverse deceleration, switch-off pre-warning and push button continuous light can be switched on, stand-by loss only 0.3 - 0.8 Watt. Material quality: Thermoplastic Finishing of the surface: matt Suitable for dimmer: No Suitable for pulse pushers: Yes Suitable for roller shutter switch: No Suitable for switch: Yes In the case: Yes In the tube socket housing: No As module/plate: No Touch mode: Yes Switch mode: Yes With radio hand transmitter: Yes With radio code: No With radio button: Yes Suitable for blind switch: No Suitable for blind switch: No. 1 Locker potential-free 10A/250V AC, incandescent lamps 2000 Watt, downtime delay with switch-off warning and pushbutton continuous light can be switched on. Encrypted radio, bidirectional radio and repeater function can be switched on. Stand-by loss only 0.3-0.8 watts. For installation. 45mm long, 45mm wide, 33mm deep. If the supply voltage fails, the switching state is maintained. When the supply voltage is recurring, it is switched off in a defined manner. After installation, wait for the automatic short synchronization before the switched consumer is placed on the network. In addition to the radio control input via an internal antenna, this radio actuator can also be controlled locally by means of a conventional control probe mounted in front of it. A glow lamp current is not permitted. Encoded sensors can be learned. Bidirectional radio and/or a repeater function can be switched on. Each state change and the central control telegrams received are then confirmed with a radio telegram. This radio telegram can be learned in other actuators such as FSR61NP-230V, GFVS software and universal displays.

Radio-Dimmaktor Tipp-Funk® Universal-Dimmaktor, with Power MOSFET 230 V-Glüh- and halogen lamps up to 300 W, 230 V-LED up to 100 W, no inductive (wound) transformers, with children's room and slumber circuit, no minimum load, stand-by loss only 0.7 W, it can be possible to. With Power MOSFET. 230V-Glüh- und Halogen-Lampen bis 300W, 230V-LED bis 100W. No inductive (wound) transformers. With children's room and slumber circuit. No minimum load. Stand-by-loss only 0.7 Watt. With the comfortable Tip-Funk® technique, up to 24 radio universal probes, radio direction probes, radio central control probes and motion sensors TF-BSB can be learned. In addition, the actuator can be locally controlled with a conventional 230V controller without a glow lamp current. When learning, the dimmactor can be set to phase-section in order to allow optimum dimming with different LEDs.

Radio minihand transmitter, 45x85mm, 18mm high. Weight only 60 grams. The batteryless mini-hand transmitter FMH8 contains two same radio modules as the radio button FT4 and has 8 buttons. 8 evaluable radio telegrams can therefore be sent. The housing is laser-engraved with numbers 1 to 8. According to the user manual, the radio modules contained in the radio minihand transmitter can be learned in encrypted form into all encryptable actuators of the series 61 and 71 as well as into the FAM14. For this purpose, the radio-taster encryption rocker FTWW is required. Encryptable actuators carry the key pictogram. Color: anthracite Number of channels: 8

Wireless radio hand transmitter, can be glued to the wall, on glass or on furniture with an adhesive film, with 2 label labels for the back and 1 adhesive film. The radio modules contained in the radio hand transmitter can, according to the user's instructions, be learned in encrypted form in all encryptable actuators of the series 61 and 71, as well as in the FAM14. Color: white Number of channels: 8 Window transmitter: No Suitable for display element: No Hand transmitter: Yes Wall transmitter: No Remote control: Yes Halogen-free: Yes Surface design: shiny Suitable for switches: Yes Suitable for dimmer: Yes Suitable for blind switches: Yes Radio transmitter, 154x50mm, 16mm high. The batteryless hand transmitter contains two same radio modules as the radio button FT4 and has 2 double rockers. 8 evaluable radio telegrams can therefore be sent. This radio hand transmitter can also be glued to the wall, to glass or to furniture with an adhesive film as well as the non-conductive radio buttons. Includes 2 labeling labels for the back and 1 adhesive film. The radio modules contained in the radio hand transmitter can, according to the user's instructions, be learned in encrypted form in all encryptable actuators of the series 61 and 71, as well as in the FAM14. For this purpose, the radio-taster encryption rocker FTWW is required. Encryptable actuators carry the key pictogram.

Communication interface FTS14 communication interface for the Eltako-RS485-Bus with integrated switching power supply 12 V DC-1A, stand-by-loss only 0.6 Watt, series installation device for mounting on support rail DIN-EN 60715 TH35, 2 division units, cross wiring bus and power supply with plug-in bridge, mini-USB for connecting a PC for creating a device list, for configuring actuators with the help of PCT14 and for data backup TLE14 Eltako-RS485 bus with integrated power supply 12V DC/8W. Stand-by loss only 0.6 Watt. Supply voltage 230V. Included are 2 terminal resistors for plugging in with imprint ?, 1/2 TE, 3 plug-in bridges 1 TE (including 1 replacement), 2 plug-in bridges 1/2 TE (including 1 replacement) and a plug-in bridge mounting tool SMW14. Bus and power supply with plug-in bridge. At the last actuator, the adjacent second terminal resistor must be plugged on. Mini USB to connect a PC to create a device list, to configure the actuators using PCT14 and to backup data. A legalization code for downloading the PCT14 from the Eltako-Homepage www.eltako.de is the FTS14KS. All FTS14EM and possibly gateways FGW14 are connected to the terminal hold when they connect a PC to RS232 bus. 10 different operating modes according to the user manual can be set with the operating mode rotary switch BA. The LED at the bottom lights green when a connection was established by PCT14. When reading or writing data, the green LED flickers. The green LED expires when the connection was separated from PCT14. With a load greater than 50% of the rated power of 8W, half of the division unit is required with the spacer DS14 on the left side.

Current surge switch relays for mounting on support rail DIN-EN 60715 TH35 4 times power surge switch relays for central and group control, 4 independent power surge switch functions, contact 1 closer 16 A/250 V AC, 4 individual power surge switch functions with central input and output respectively. group One and Out, voltage supply, group control or local control voltage 8 ..230V UC and galvanically separated central control voltage 8..230V UC, central control commands have priority, with Eltako-Duplex technology can switch 3 of the contacts to zero passage of a connected 230V AC phase, max. Fluorescent load: 1000 VA TLE: 2 Number of locks: 4 Number of openers: 4 Width in division units: 2 Max. Fluorescent lamp load (parallel compensated): 500 VA Max. Fluorescent lamp load (Duo circuit): 1000 VA Max. Incandescent lamp load: 2000 W supply voltage range: 8 - 230 V control voltage 1: 8 - 230 V control voltage type 1: AC/DC frequency of control voltage 1: 50 - 50 Hz control voltage 2: 8 - 230 V control voltage type 2: AC/DC Max. Lamp load: 1000 VA Max. Switching current (cos phi = 0.6): 4 A Installation depth: 58 mm Function: semi-electronic 4-fold current surge relay, also for central and group control. With 4 independent contacts. Stand-by loss only 0.03 to 0.4 Watt. To this end, simply connect the N conductor to the terminal (N) and the outer conductors to 1(L), 3(L) or 5(L). This results in an additional stand-by consumption of only 0.1 Watt. If the contact is used for controlling switching devices which themselves do not switch in the zero passage, (N) should not be connected, since the additional closing delay otherwise causes the opposite. Local universal control voltage 8..230V UC. With additional universal voltage control inputs centrally in and out for 8.230V UC, isolated from the local control inputs galvanically. With additional group control inputs in and out for 8..230V UC. Same potential as local tax revenues.

Electronic AC meter for mounting on support rail DIN-EN 60715 TH35, maximum current 32A, stand-by-loss only 0.4 Watt, accuracy class B (1)%, with S0 interface TLE: 1 current A: 5(65) Certified: Yes

Power surge group switches for central control Processor controlled, EGS12Z2 and EGS12Z convert the commands of the sensors or the downstream sensor relays and switch two motors or one motor or the motor disconnect relay MTR12. control voltage at terminals +B1 --A2 or. A3 to A8 must be the same potential, the following non-sections: automatic transmission, reverse delay, automatic transmission, duration up, duration Aba3 and A4 for local control with a normal double shutter switchA3 and A4 alternatiw for static central control a5 and A6 for local control with a normal double shutter switchA5 and A6 alternatiw for dynamic central control. Electric shock group switches for central control for two 230V motors. Stand-by loss only 0.05 - 0.9 Watt. The control voltage at terminals A3 to A8 must have the same potential. This current surge group switch converts the commands of the sensor relays or of switches and buttons and switches two 230V motors depending on the setting of the rotary switches on the front side. 1/2 = motor 1, 3/4 = motor 2. The mode of operation corresponds completely to the current surge group switch EGS12Z-UC, in which a motor separation relay MTR12-UC is integrated. 2+2 closer 5A/250V AC Number of closers: 4 width in division units: 2 Rated switching current: 5 A Control voltage 1: 8 - 230 W Control voltage type 1: AC/DC Installation depth: 58 mm Function: electronic group switch Assembly type: DIN rail Frequency of control voltage 1: 50 - 50 Hz Voltage type of supply voltage: AC/DC Supply voltage range: 8 - 230 W Max. Switching current (cos phi = 0.6): 2 A manual operation possible: Yes