Eltako FSR61-230V radio actuator

Radio actuator power surge relays for installation and AP installation, 1 locks potential-free 10 A /250W AC, incandescent lamps 2000 Watt, power surge switches with reverse deceleration, switch-off pre-warning and pushbutton continuous light can be switched on, stand-by loss 0.9 Watt 1 locks potential-free 10A/250V AC, incandescent lamps 2000 Watt, fall delay with switch-off pre-up and pushbutton. Encrypted radio, bidirectional radio and repeater function can be switched on. Stand-by loss only 0.8 Watt. For installation. 45mm long, 45mm wide, 33mm deep. If the supply voltage fails, the switching state is maintained. When the supply voltage is recurring, it is switched off in a defined manner. After installation, wait for the automatic short synchronization before the switched consumer is placed on the network. In addition to the radio control input via an internal antenna, this radio actuator can also be controlled locally by means of a conventional control probe mounted in front of it. A glow lamp current is not permitted. Encoded sensors can be learned. Bidirectional radio and/or a repeater function can be switched on. Each state change and the central control telegrams received are then confirmed with a radio telegram. This radio telegram can be taught in other actuators, the GFVS software and in universal displays. Scene control: A plurality of FSR61 can be switched on or off to form a scene with one of the four control signals of a pushbutton learned as a scene scanner. With the upper rotary switch, up to 35 radio buttons are assigned in the LRN position, one or more central control buttons thereof. Material quality: Thermoplastic Finishing surface: matt Suitable for dimmer: No Suitable for pulse pushers: Yes Suitable for roller shutter switch: No Suitable for switch: Yes In the case: Yes In the tube socket housing: No As module/plate: No button operation: Yes Switch operation