Eltako FSR71NP-230V radio power surge relay

Radio power surge relays for installation in the 230 V power supply line, 1 closer not potential-free 16 A/250 W AC, incandescent lamps 2000 W, with light scene control via PC or with radio driver, encrypted radio, bidirectional radio and repeater function connectable, stand-by loss only 0.8 Watt power surge relay 1 closer not potential-free 16A/250V AC, incandescent lamps. With light scene control via PC or with radio buttons. Encrypted radio, bidirectional radio and repeater function can be switched on. Stand-by loss only 0.8 Watt. Mounting into the 230V power supply line, for example in intermediate ceilings and luminaires. 166mm long, 46mm wide and 31mm deep. With cable load. If the supply voltage fails, the switching state is maintained. When the supply voltage is recurring, it is switched off in a defined manner. Scene control: With one of the four control signals of a pushbutton learned as a scene scanner with a double rocker, a plurality of FSR71NP can be switched on or off to one scene in each case. Central commands on the PC are sent with the building radio visualization and control software GFVS. Learn one or more FSR71NP on the PC. With the rotary switches, the probes are learned and, if necessary, the device is tested. For normal operation, the middle and lower rotary switches are then set to AUTO. The LED under the upper rotary switch accompanies the learning process according to operating instructions and displays control commands during operation by short flashing. Number of relays: 1 Number of commands: 32 Material quality: Thermoplastic Finishing of the surface: matt Suitable for dimmer: No Suitable for pulse pushers: Yes Suitable for roller shutter switches: No Suitable for switches: Yes In the case: Yes In the tube socket housing: No As module/plate: No Tasting operation: Yes Switching operation: Yes With radio hand transmitter: Yes