List of products by brand ABB

To control a maximum of four independent 24 W DC drives for positioning blinds, roller shutters, awnings and other hangings as well as for controlling doors, windows and ventilation flaps. With automatic driving time determination and manual operation directly on the device. Functions: On/off, lamella adjustment/stop, position and scene control, safety functions, sun protection and heating/cooling automatic, status messages.

For controlling a maximum of four 230 W AC independent drives for positioning blinds, roller shutters, awnings and other hangings, as well as for controlling doors, windows and ventilation flaps. The outputs are interlocked electromechanically. Functions: On/off, lamella adjustment/stop, position and scene control, safety functions, sun protection and heating/cooling automatic, status messages.

Switches independent electrical consumers via potential-free contacts 12 ABB i-bus®. The manual operation of the contact is possible for each output. The switching state of the contact is displayed. The 16/20AX, 16A-AC3, C-Last series is particularly suitable for switching loads with high turn-on current peaks such as illuminants with compensation capacitors or fluorescent lamp loads (AX) according to DIN EN 60669.

The KNX voltage supply 640 ma with diagnostic function and extended LED display generates and monitors the KNX system voltage (SELV). With the integrated throttle, the bus line is decoupled from the voltage supply. The voltage output is short-circuit-proof and overload-proof. The two-color LED indicates the status of the device. The device has an additional short-circuit-proof and overload-proof 30 W DC voltage output. This can be used for feeding a further bus line (in conjunction with a separate throttle). The voltage supply has a wide-range input for the supply voltage in the range 85Å265 W AC,50/60 Hz.

Switches independent electrical consumers via potential-free contacts 4 ABB i-bus®. The manual operation of the contact is possible for each output. The switching state of the contact is displayed. The 10AX-AC1 series is particularly suitable for switching ohmic, inductive and capacitive loads, as well as fluorescent lamp loads (AX) according to DIN EN 60669.

Switches independent electrical consumers via potential-free contacts 4 ABB i-bus®. The manual operation of the contact is possible for each output. The switching state of the contact is displayed. The 16A-AC1 series is suitable for switching ohmic, inductive and capacitive loads.

Switches independent electrical consumers via potential-free contacts 8 ABB i-bus®. The manual operation of the contact is possible for each output. The switching state of the contact is displayed. The 16A-AC1 series is suitable for switching ohmic, inductive and capacitive loads.

Switches independent electrical consumers via potential-free contacts 12 ABB i-bus®. The manual operation of the contact is possible for each output. The switching state of the contact is displayed. The 16A-AC1 series is suitable for switching ohmic, inductive and capacitive loads.

The KNX voltage supply 320 ma generates and monitors the KNX system voltage (SELV). With the integrated throttle, the bus line is decoupled from the voltage supply. The voltage output is short-circuit-proof and overload-proof. The two-color LED indicates the status of the device. The voltage supply has a wide-range input for the supply voltage in the range 85Å265 W AC, 50/60 Hz.

The KNX voltage supply 640 ma generates and monitors the KNX system voltage (SELV). With the integrated throttle, the bus line is decoupled from the voltage supply. The voltage output is short-circuit-proof and overload-proof. The two-color LED indicates the status of the device. The device has an additional short-circuit-proof and overload-proof 30 W DC voltage output. This can be used for feeding a further bus line (in conjunction with a separate throttle). The voltage supply has a wide-range input for the supply voltage in the range 85Å265 W AC,50/60 Hz.

The ABB i-bus® KNX Line Coupler LK/S 4.2 is a series installation device with 2 TE module width. It is used as a line/range coupler or line amplifier. As a line coupler, the LK/S connects a line with a main line, as a region coupler a main line with a region line. It provides a galvanic separation. The group addresses of the main groups 14 . . . 31 can be filtered in conjunction with the ETS 4 .

forms the interface between KNX installations and IP networks and works according to the KNXnet/IP specification (tunneling and routing). The IPR/S can be used as a fast line or range coupler (routing). The complete filter table for all main groups (0-31) can be loaded. With the ETS, KNX devices can be programmed via LAN. 5 tunneling servers are available for this and for other clients. The IP address of the IPR/S can be set or received by a DHCP server. The power supply is over 12..30 W DC or alternating via Power-over-Ethernet (Poe) to IEEE 802.3af Class 1. Alternatiw to KNX Standard Communication (Multicast) can communicate up to 10 IPR/S 3.1.1 via Unicast.