List of products by brand ABB

Module for insertion into the space controller basic device. It controls two independent blind or roller shutter drives with 115/230 W AC. Special functions: driving in position and sun protection automatic.

The Universal E/A Concentrator is used for connecting probes or signal lamps, e.g. in an operating and display tray. It has 32 channels that can be individually parameterized as inputs or outputs. Needs external 12 or 24 W DC auxiliary voltage .

For switching and dimming light bulbs, 230V halogen lamps or low-voltage halogen lamps on wound or electronic transformers (automatic load detection). Output power 2x300 VA to 45 °C ambient temperature, as well as max. 500 VA if only one output is operated. Both outputs are independent of one another and can be fed from different phases. Extensive application program with scene and time functions.

REG devices for switching and dimming via ABB i-bus® from 2, 4 or 8 independent lamp groups from electr. Switching devices with 1-10V control interface. With potential-free load relays (16A-AC1) the supply voltage of the ballasts can be used per channel via ABB i-bus® or manually turn on and off. Switch state indicator available. No power supply required.

The device queries 4 potential-free contacts with internally generated interrogation voltage. The input state is displayed via 4 yellow LED’s. Binary inputs enable a total of 4 input signals (in 2 groups). Each channel has a button for manual operation. The devices are used by ABB i-bus® supplies and does not require additional power supply.

The device records four AC/DC signals in the voltage range of 10...230 V. The input state is displayed via 4 yellow LED’s. Binary inputs enable a total of 4 input signals (in 2 groups). Each channel has a button for manual operation. The devices are used by ABB i-bus® supplies and does not require additional power supply.

The device queries 8 potential-free contacts with internally generated interrogation voltage. The input state is displayed over 8 yellow LED’s. The binary inputs allow the detection of 8 independent input signals. Each channel has a button for manual operation. The devices are used by ABB i-bus® supplies and does not require additional power supply.

The device records eight AC/DC signals in the voltage range of 10...230 V. The input state is displayed over 8 yellow LED’s. The binary inputs allow the detection of 8 independent input signals. Each channel has a button for manual operation. The devices are used by ABB i-bus® supplies and does not require additional power supply.

For controlling thermoelectric actuators in heating/cooling systems at 24...230 W AC. The outputs are short-circuit and overload-proof and can be controlled by manual operation during commissioning.

For controlling a maximum of eight independent 230 W AC drives for positioning blinds, roller shutters, awnings and other hangings, as well as for controlling doors, windows and ventilation flaps. With manual operation directly on the device. No auxiliary voltage required. The outputs are interlocked electromechanically. Functions: On/off, lamella adjustment/stop, position and scene control, safety functions, sun protection and heating/cooling automatic, status messages.

For controlling a maximum of four 230 W AC independent drives for positioning blinds, roller shutters, awnings and other hangings, as well as for controlling doors, windows and ventilation flaps. With automatic driving time determination and manual operation directly on the device. No auxiliary voltage required. The outputs are interlocked electromechanically. Functions: On/off, lamella adjustment/stop, position and scene control, safety functions, sun protection and heating/cooling automatic, status messages.

For controlling a maximum of eight independent 230 W AC drives for positioning blinds, roller shutters, awnings and other hangings, as well as for controlling doors, windows and ventilation flaps. With automatic driving time determination and manual operation directly on the device. No auxiliary voltage required. The outputs are interlocked electromechanically. Functions: On/off, lamella adjustment/stop, position and scene control, safety functions, sun protection and heating/cooling automatic, status messages.