List of products by brand ABB

forms the interface between KNX installations and IP networks and works according to the KNXnet/IP specification (tunneling). With the ETS, KNX devices can be programmed via LAN. 5 tunneling servers are available for this and for other clients (e.g. visualizations). The IP address of the IPS/S can be set or received by a DHCP server. The power supply is via 12..30 W DC or alternating via Poe to IEEE 802.3af Class 1.

The weather center WZ/S collects and processes weather data from the weather sensor. The weather sensor provides the data for dusk, brightness in three directions, rain, temperatures, information about day/night, wind speeds, date and time. There are 4 value stores available, 24 values can be stored per value store. The weather center is matched to the weather sensor WES/A. The integrated power supply supplies the weather sensor directly with voltage. The device can optionally be operated with an operating voltage of 115 to 230 W AC, 50/60 Hz.

To drive DALI participants via ABB i-bus®. A DALI output for max. 64 DALI participants. The DALI power supply is integrated. The activation can take place per DALI subscriber (64), via groups (16), together in the broadcast or via scenes (16). Extensive error and interference messages are available. DALI emergency light converter(64) according to EN 62386-202 are supported. The function test and continuous tests can be triggered via KNX via the emergency light converter and the result can be made available on the KNX. Slave, staircase light, locking and forced guidance function are integrated. The DALI telegram rate is variable. A separate diagnostic and commissioning tool is provided for individual re-addressing of the DALI participants or group assignment, ABB i-bus tool available.

To drive DALI participants via ABB i-bus®. Two DALI output for max. 2x64 DALI participants. The DALI power supply is integrated. The activation takes place per DALI subscriber (2x64), about groups (2x16), together in the broadcast or through scenes (2x16). Extensive error and interference messages are available. DALI emergency light converter (2x64) are supported in accordance with EN 62386-202. The function test and continuous tests can be triggered via KNX via the emergency light converter and the result can be made available on the KNX. Slave, staircase light, locking and forced guidance function are integrated. The DALI telegram rate is variable. A separate diagnostic and commissioning tool, i-bus tool is available for individual re-addressing of the DALI participants or group assignment.

The electromotive actuator ST/K 1.1 is a proportional actuator for controlling radiator valves via ABB i-bus®. The actuator is mounted on thermostat valve bottom parts (accessible valve adapter VA10, VA78 included). The control takes place via a steady EIB / KNX room temperature controller. The actual valve position is indicated by 5 LEDs. Furthermore, the electromotive actuator ST/K 1.1 has two binary inputs which can be used, for example, for connecting a presence contact and/or window contact. The status of these inputs can be sent to the EIB / KNX.

The IP patch module consists of an RJ-45 module and a mounting adapter for fastening to the hat rail.

The radio clock sends the current time and date to the bus. The time can optionally be received by a DCF or GPS antenna. Furthermore, the radio control clock is used for simple setting of time programs.

FC600/BR Universal detector base for the FC650 detector series for connection of the detectors to fire detector centers of the limit value technology for cleaning installation in dry rooms

ABB Phase rails enable secure and economical cross-wiring of automatic fuses, fault current protection devices and other modular installation devices. The following must be taken into account for a correct phase rail selection: terminal type (double terminal or cage terminal), number of terminals (1, 2, 3, 4, 1+N or 3+N), type of device (automatic, fault current protection devices or modular installation devices), combinations of the different types of device, use of automatic fuses with auxiliary switches mounted on the right and the bottom, phase rail connection cross-section (current loadability), number of modules (extractable phases)

ABB Phase rails enable secure and economical cross-wiring of automatic fuses, fault current protection devices and other modular installation devices. The following must be taken into account for a correct phase rail selection: terminal type (double terminal or cage terminal), number of terminals (1, 2, 3, 4, 1+N or 3+N), type of device (automatic, fault current protection devices or modular installation devices), combinations of the different types of device, use of automatic fuses with auxiliary switches mounted on the right and the bottom, phase rail connection cross-section (current loadability), number of modules (extractable phases)

SZ-BSK contact protection cap for busbar blocks

ABB Phase rails enable secure and economical cross-wiring of automatic fuses, fault current protection devices and other modular installation devices. The following must be taken into account for a correct phase rail selection: terminal type (double terminal or cage terminal), number of terminals (1, 2, 3, 4, 1+N or 3+N), type of device (automatic, fault current protection devices or modular installation devices), combinations of the different types of device, use of automatic fuses with auxiliary switches mounted on the right and the bottom, phase rail connection cross-section (current loadability), number of modules (extractable phases)