Schneider

3-pin+N, operating current 80 A, measuring insulation voltage (Ui) 440 V AC, operating voltage (Ue) 400 V AC, 9 mm pin spacing, ablable. 48 modules, installation of the phase rail to the series installation devices from above. Compatible with the switch-off capacity of the circuit breakers Schneider Electric. Color - RAL 9003. The phase rail meets the following standards- IEC 61439-1.

This product Clario iC40N is a circuit breaker (MCB). It is a 1P+N circuit breaker with 1 protected pole and 10A in rated current and trigger curve C. The switch-off capacity is up to 10kA at 230VAC in accordance with the standard EN/IEC 60947-2. This product meets both the EN/IEC 60898-1 industrial standard and the EN/IEC 60947-2 standard. Installation and cabling is simplified by the clip-on function and ease of maintenance. Electric service life of up to 20,000 cycles and a mechanical service life of up to 20,000 cycles. The Ue operating voltage is 230VAC. The rated insulation voltage Ui is 400VAC. The rated impact strength is 4kV. The operating frequency is 50 Hz or 60 Hz. Can be mounted on DIN rails. Its width is 2 x 9 mm. The level of pollution is 3. The product colour is white (RAL9003). The dimensions are (B) 18mm x (H) 85mm x (T) 74mm. The weight is 120g. According to the standard IEC 60529, the degree of protection is IP20 and IP40 in the housing. The operating temperature is -25° C. to 70° C. The storage temperature is -40° C. to 85° C. The operating temperature is -25° C. to 70° C.

Circuit breaker Resi9. 3 polig, 32A, Characteristics C. Switching capacity from 10kA to IEC/EN 60898-1. Operating voltage (Ue) 400V AC, operating frequency 50/60 Hz. Double function terminal for cable and forked comb rail on the underside of the device. Rear hat rail fastening element on the underside of the device. Low-wear and user-independent switching of contacts. Color RAL 9003

Circuit breaker Resi9. 1 polig, 20A, Characteristics C. Switching capacity from 6kA to IEC/EN 60898-1. Operating voltage (Ue) 230V AC, operating frequency 50/60 Hz. Double function terminal for cable and forked comb rail on the underside of the device. Rear hat rail fastening element on the underside of the device. Low-wear and user-independent switching of contacts. Color RAL 9003

Circuit breaker Resi9. 3 polig, 16A, Characteristics B. Switching capacity from 10kA to IEC/EN 60898-1. Operating voltage (Ue) 400V AC, operating frequency 50/60 Hz. Double function terminal for cable and forked comb rail on the underside of the device. Rear hat rail fastening element on the underside of the device. Low-wear and user-independent switching of contacts. Color RAL 9003

Circuit breaker Resi9. 1 polig, 13A, Characteristics B. Switching capacity from 6kA to IEC/EN 60898-1. Operating voltage (Ue) 230V AC, operating frequency 50/60 Hz. Double function terminal for cable and forked comb rail on the underside of the device. Rear hat rail fastening element on the underside of the device. Low-wear and user-independent switching of contacts. Color RAL 9003

Circuit breaker Resi9. 3 polig, 20A, Characteristics C. Switching capacity from 6kA to IEC/EN 60898-1. Operating voltage (Ue) 400V AC, operating frequency 50/60 Hz. Double function terminal for cable and forked comb rail on the underside of the device. Rear hat rail fastening element on the underside of the device. Low-wear and user-independent switching of contacts. Color RAL 9003

Circuit breaker Resi9. 1 polig, 16A, Characteristics B. Switching capacity from 10kA to IEC/EN 60898-1. Operating voltage (Ue) 230V AC, operating frequency 50/60 Hz. Double function terminal for cable and forked comb rail on the underside of the device. Rear hat rail fastening element on the underside of the device. Low-wear and user-independent switching of contacts. Color RAL 9003

Circuit breaker Resi9. 3 polig, 16A, Characteristics C. Switching capacity from 10kA to IEC/EN 60898-1. Operating voltage (Ue) 400V AC, operating frequency 50/60 Hz. Double function terminal for cable and forked comb rail on the underside of the device. Rear hat rail fastening element on the underside of the device. Low-wear and user-independent switching of contacts. Color RAL 9003

Device position in the systemDateNetwork frequency50/60 HzOperating measurement voltage Ue230 V AC 50/60 HzLimit of magnetic triggering3... 5 x inresidual current release technologyVoltage independentBem.-Betr.-off switch. Ics7500 A 75% Icn at 230 V AC 50/60 Hz corresponds to EN/IEC 61009-2-1Nominal and triggering cap.Idm 6000 A at 230 V AC 50/60 Hz corresponds to EN 61009-2-1Idm 500 A at 230 V AC 50/60 Hz corresponds to IEC 61009-2-1Limiting class3 conforming to EN/IEC 61009-2-1Rated insulation voltage Ui400 V AC 50/60 HzMeasuring impact strength [Uimp]4 kVPlus contact displayYesType of operationSafety switchDisplay on the deviceON/OFF displayError messageAssembly variantScrew terminalsMounting mountDIN railCam rail and distributor block CompatibilityTop or bottom: Zinc9-mm grid4Height85 mmWidth36 mmDepth74 mmProduct weight210 gColourWhiteMechanical life20000 cyclesElectrical life20000 cyclesDescription of locking optionsPlombableLocking deviceConnections - TerminalsTunnel clamps on top or bottom1...16 mm2 fixedTunnel clamps on top or bottom1...10 mm2 flexibleWire insulation length14 mm for top or bottom connectionSuction torque2 Nm up or downEarthlock protectionIntegratedAssemblyStandardsEN/IEC 61009-2-1Product certificationsTHEType of protection (IP)IP20 corresponds to IEC 60529IP40 (modular housing) corresponds to IEC 60529Pollution3Overvoltage categoryconforming to IEC 60364electromagnetic compatibility8/20 μs impulse withstand, 250 A conforming to EN/IEC 61009-2-1Relative humidity95% at 55° CInstallation height2000 mAmbient temperature during operation-25...60 °CAmbient temperature in storage-40...85 °C9.9 cmPackaging unitsPackaging type VPE1PCENumber of devices per pack1Packaging weight (Lbs)213 gHeight VPE18.3 cmWidth VPE14,3 cmLength VPE1SeriesActi9Product nameActi9 iCV40Product or component typeOvercurrent protection switch (FI/LS)Short description of the deviceICV40HDescription of the Pole1P + NNumber of protected Poland1neutral positionleftRated current [In]16 ANetwork connectionACTechnology of the triggering unitThermomagneticCharacteristicsBEarth solubility30 mAEarthlock protection time delay.UndelayedEarth-lock protection classType A-GSwitching capacity10000 A Icn at 230 V AC 50/60 Hz corresponds to EN/IEC 61009-2-1Suitability for insulationYes corresponds to EN/IEC 60947-2Quality labelOF

Device position in the systemDateNetwork frequency50/60 HzOperating measurement voltage Ue230 V AC 50/60 HzLimit of magnetic triggering3... 5 x inresidual current release technologyVoltage independentBem.-Betr.-off switch. Ics7500 A 75% Icn at 230 V AC 50/60 Hz corresponds to EN/IEC 61009-2-1Nominal and triggering cap.Idm 6000 A at 230 V AC 50/60 Hz corresponds to EN 61009-2-1Idm 500 A at 230 V AC 50/60 Hz corresponds to IEC 61009-2-1Limiting class3 conforming to EN/IEC 61009-2-1Rated insulation voltage Ui400 V AC 50/60 HzMeasuring impact strength [Uimp]4 kVPlus contact displayYesType of operationSafety switchDisplay on the deviceON/OFF displayError messageAssembly variantScrew terminalsMounting mountDIN railCam rail and distributor block CompatibilityTop or bottom: Zinc9-mm grid4Height85 mmWidth36 mmDepth74 mmProduct weight210 gColourWhiteMechanical life20000 cyclesElectrical life20000 cyclesDescription of locking optionsPlombableLocking deviceConnections - TerminalsTunnel clamps on top or bottom1...16 mm2 fixedTunnel clamps on top or bottom1...10 mm2 flexibleWire insulation length14 mm for top or bottom connectionSuction torque2 Nm up or downEarthlock protectionIntegratedAssemblyStandardsEN/IEC 61009-2-1Product certificationsTHEType of protection (IP)IP20 corresponds to IEC 60529IP40 (modular housing) corresponds to IEC 60529Pollution3Overvoltage categoryconforming to IEC 60364electromagnetic compatibility8/20 μs impulse withstand, 250 A conforming to EN/IEC 61009-2-1Relative humidity95% at 55° CInstallation height2000 mAmbient temperature during operation-25...60 °CAmbient temperature in storage-40...85 °C9.9 cmPackaging unitsPackaging type VPE1PCENumber of devices per pack1Packaging weight (Lbs)213 gHeight VPE18.3 cmWidth VPE14,3 cmLength VPE1SeriesActi9Product nameActi9 iCV40Product or component typeOvercurrent protection switch (FI/LS)Short description of the deviceICV40HDescription of the Pole1P + NNumber of protected Poland1neutral positionleftRated current [In]13 ANetwork connectionACTechnology of the triggering unitThermomagneticCharacteristicsBEarth solubility30 mAEarthlock protection time delay.UndelayedEarth-lock protection classType A-GSwitching capacity10000 A Icn at 230 V AC 50/60 Hz corresponds to EN/IEC 61009-2-1Suitability for insulationYes corresponds to EN/IEC 60947-2Quality labelOF

Schneider A9P54725 iC40N cable protection switch 3P+N 25A C

MIGO small distributor, 1-row, UP. Product or component type: Cabinet - Width: 330 mm niche, 344 mm frame - Height: 310 mm niche, 349 mm frame - depth: 11 mm frame, 90 mm niche - delivered equipment: Clamping bar (1), gypsum board mounting kit (1), label (1). Your benefit:Available in four versions and as a multimedia distributorEasy mountingStable and break resistantSpacious wiring roomsAlongside each other can be arranged flushPrecious line introduction slidersLockable and fast mountable clampsExtendable hat rail from 12 to 14 TEFunctional contact protection coverPreliminaries for cableSpacers available for cleaningFrame horizontal alignmentDoor with elegant snap closureLock interchangeableMobile LibellaSimple door stop change left or rightStorage-friendly cardboard with integrated cleaning protection
.. Applications:HousingConstructionLow-voltage switchgear
.. Your benefit: solution, through 50 years of experience of Schneider Electric and ABN is supported in the development and production of electrical protection devices, measurement and distribution systems Schneider Electric Equipment according to EN 61439-3.. Applications: indoor and outdoor facilitiesElectrical distribution, measurement and multimediaFor residential and commercial buildingsFor a new energy landscape.

AMIGO small distributor, 1-row, HW. Product or component type: Cabinet - Width: 344 mm frame, 310 mm apertures - Height: 349 mm frame, 295 mm apertures - Depth: 11 mm frame, 88 mm apertures - delivered equipment: terminal strip (1), gypsum board mounting kit (1), label (1). Your benefit:Available in four versions and as a multimedia distributorEasy mountingStable and break resistantSpacious wiring roomsAlongside each other can be arranged flushPrecious line introduction slidersLockable and fast mountable clampsExtendable hat rail from 12 to 14 TEFunctional contact protection coverPreliminaries for cableSpacers available for cleaningFrame horizontal alignmentDoor with elegant snap closureLock interchangeableMobile LibellaSimple door stop change left or rightStorage-friendly cardboard with integrated cleaning protection
.. Applications:HousingConstructionLow-voltage switchgear
.. Your benefit: solution, through 50 years of experience of Schneider Electric and ABN is supported in the development and production of electrical protection devices, measurement and distribution systems Schneider Electric Equipment according to EN 61439-3.. Applications: indoor and outdoor facilitiesElectrical distribution, measurement and multimediaFor residential and commercial buildingsFor a new energy landscape.

Full-door small distributor, 1-row, AP. Accessories/parts category: Housing accessories. Your benefit:Available in four versions and as a multimedia distributorEasy mountingStable and break resistantSpacious wiring roomsAlongside each other can be arranged flushPrecious line introduction slidersLockable and fast mountable clampsExtendable hat rail from 12 to 14 TEFunctional contact protection coverPreliminaries for cableSpacers available for cleaningFrame horizontal alignmentDoor with elegant snap closureLock interchangeableMobile LibellaSimple door stop change left or rightStorage-friendly cardboard with integrated cleaning protection
.. Applications:HousingConstructionLow-voltage switchgear
.. Your benefit: solution, through 50 years of experience of Schneider Electric and ABN is supported in the development and production of electrical protection devices, measurement and distribution systems Schneider Electric Equipment according to EN 61439-3.. Applications: indoor and outdoor facilitiesElectrical distribution, measurement and multimediaFor residential and commercial buildingsFor a new energy landscape.