Best sellers

Press cable shoes DIN 46235
• Material: 99.9% electrolyte copper
• Surface: galvanized

Color:green/yellowRated current:63 ARated voltage:230 VHeight installed product:33 mmLength:105 mmWide installed product:105 mm

Screw cap 70mm

Legrand 775811 Use Wipptaster 1xS Locker 1-pinApplication Wipptaster Locker 1-pole

I-SYSTEM, TITANWEISS WIPPE MIT FENSTER MIT SYMBOL LICHT FUER TASTER, 55X55MM

The strip distributors allow for the installation of 45mm row mounting devices. They consist of the two flame-retardant plastic profile strips (terminal cover strips) KLV-LV-PL and the two side plates KLV-LV-SP with inserted retaining plates. Plastic Color: RAL 7035 side panels, RAL 7040 profile strip. Mounting takes place on the hat rail according to IEC/EN 60715.

Legrand Safety switch TX3 according to EN 60898-1, VDE 0641-11, EN 60947-2, 1-pole with switching neutral conductor, B-characteristics, measurement current In 13 A, measurement switching capacity Icn10 kA according to EN 60898-1, measurement voltage Un 230 VAC, measurement frequency 50/60 Hz, energy limiting class 3, attachment to hat profile rail EN 607. Circuit breakers with B-characteristics are primarily designed for line protection in light and socket circuits.

Pipe end sleeve for plugging on electrical installation pipes (steel fitting pipes, aluminium pipes and stainless steel pipes). Material polyethylene. Halogen-free. Colour: light grey Thread: M 25 Rated diameter: 28.4 mm Length: 27.5 mm

Main line branch terminals 25/16 mm2, 1-pole. Classy. Mounting on 35 mm support rail according to. EN 50022 / EN 60715. e.g. for installation small distributors and counter positions according to. WDE 0603. Installation small distributor and counter positions AC 400W. Main line branch terminals WDE 0603-2, connection material for low voltage circuits for household and similar purposes WDE 0613, Part 1 / EN 60998-1. Color coding corresponding to valid vein colors. Mounting horizontally or vertically. Voltage: 1000 W. WDE certified. Suitable for Cu and Al conductors. Inputs max. 25 mm2: 2nd outputs max. 16 mm2: 2nd clamping body: brass, (galvanized). Clamp screws: steel, galvanized. Insulation housing: plastic, (polyamide) impact-resistant, halogen-free. Main line 1.5 - 25 mm2 rigid/several, 2.5 Nm. branch line: 1.5 - 16 mm2 rigid/multiplier, 2 Nm. Stripping length 16 mm. Bushing clamp with 2 screws per clamping point screws with combination slot Pozidriv Z2. IP 20, fingerproof. Corners rounded. Number of poles: 1 Colour: brown

Material plasticMaterial grade polyethyleneSurface untreatedsurface polished noHalogen-free yesExecutionFor pipe diameter nominal 40 mm

100 pieces Wago 2273-204 COMPACT connection socket terminal; 4-Leiter-Klemme; housing colour transparent; Lid colour redTotal number of clamping points4Total number of potentials1ColourgreyPollution (1)2Measurement voltage EN (1) [V]450VMeasurement surge voltage (1) [kV]4KVRated current (1) [A]24AConnection technology 1PUSH WIRE®one-row, connectable 10.5 ... 2.5 mm2 / 18 ... 14 AWGStripping length 111 mm / 0.43 inStripping length of (1) [mm]11mmStripping length to (1) [mm]11mmType of wiringSide wiringFire load [MJ]0.025MWeight [g]1.3.3gWidth18 mm / 0.709 inHeight5.8 mm / 0.228 inDepth16.7 mm / 0.657 inSafety note 1in earthed nets

Erhöhter Berührungsschutz (Kinderschutz): nach IEC 60884-1Verbindungsklemmen: nach VDE 0620-1Bauart: nach DIN 49440Nennspannung: 250 V ACNennstrom: 16 A erhöhter Berührungsschutzin 45°-Stufen variable EinbaulageKlappdeckel arretiert beim Öffnen in Endstellungmit AufdruckEinbaulage des Einsatzes in 45° Schritten wählbarmit SteckklemmenBesonders geeignet für Kombinationen mehrerer Steckdosen bei Gebrauch von Winkelsteckern.polarweiß glänzend