Best sellers

The UK600 series electrical circuit distributors are designed for under-put assembly. They convince with many new and unique technical features. Thus, an up to 200 % larger connection space allows easy and efficient installation of the devices. The removable device carrier can be placed in the distributor according to requirements and thus also guarantees a simple installation. Clever details such as the cable entry sliders with integrated terminal receptacles and the variable use in scale or drywalls underline the high flexibility of the distributors. With an optional removable frame, the UK600 is turned to eye-catching and integrated into any environment. The distributions can be used in undercut and hollow wall mounting and have a WDE license plate. Applicable standards: DIN 43871, DIN EN 60670-24, WDE 0606-24

Stairlight timers with relapse delay are actuated by buttons, often equipped with a glow lamp. The shift levers are designed for a Glimm lamp current up to 150 ma and are therefore excellently suited for systems in multi-storey buildings. The stairlight time switch with falling-back delay E 232-230 has an electromechanical time relay with synchronous motor drive, with which a high operational reliability in each installation position is ensured. The time range can be set in 15-second steps from one to seven minutes. Switchable after 30s. The multifunctional devices of the product series E 232E-230 Multi 10 and E 232E-8/230 Multi 10 have 10 functions that can be set on the device front.

Power surge switches are electromagnetically actuated devices with which a simple, energy-saving and safe lighting control can be realized. As a rule, a control of current surge switches via pulse probes is used where the light is to be operated from at least three different locations. Through each control pulse sent to the coil magnet system, the device switches back to the previous position and holds it mechanically up to the next control pulse. In the event of a voltage failure, it is ensured that the last switching position is held mechanically. This technology helps significantly reduce the electrical power loss and power consumption of the devices. Due to the very quiet switching noises, power surge switches are also suitable for use in public buildings, hotels, as well as in private living areas. Depending on the type, the devices can be controlled with common control voltages and are suitable for a rated current of 16 A or. 32 A.

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN WDE 0100-430 and DIN WDE 0100-530. They meet the construction requirements DIN WDE 0641-11 and IEC/EN 60898-1, DIN WDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

Modular sockets enable the connection of devices, tools or electrical and electronic non-modular equipment in construction and industrial circuit boards. The product group contains standard versions and extended versions with additional features such as light detectors and hinged lids. The sockets are available in different country standards.

ABB Phase rails enable secure and economical cross-wiring of automatic fuses, fault current protection devices and other modular installation devices. The following must be taken into account for a correct phase rail selection: terminal type (double terminal or cage terminal), number of terminals (1, 2, 3, 4, 1+N or 3+N), type of device (automatic, fault current protection devices or modular installation devices), combinations of the different types of device, use of automatic fuses with auxiliary switches mounted on the right and the bottom, phase rail connection cross-section (current loadability), number of modules (extractable phases)

ABB Phase rails enable secure and economical cross-wiring of automatic fuses, fault current protection devices and other modular installation devices. The following must be taken into account for a correct phase rail selection: terminal type (double terminal or cage terminal), number of terminals (1, 2, 3, 4, 1+N or 3+N), type of device (automatic, fault current protection devices or modular installation devices), combinations of the different types of device, use of automatic fuses with auxiliary switches mounted on the right and the bottom, phase rail connection cross-section (current loadability), number of modules (extractable phases)

Primary clocked power supply STEP POWER for mounting rails, input: 1-phase, output: 24 V DC / 2.5 A

Plug-in bridge, grid size: 5.2 mm, length: 22.7 mm, width: 50.6 mm, pole number: 10, color: red (10 pieces)

Marker for clamps (10 pieces)

Koaxkabel 1,0/4,6 mm, 3-fach geschirmt 500 m Trommel; 1,0/4,6/6,6mm, Staku - Innenleiter, 96 er Alu - Geflecht, 19,2dB / 800MHz / 31,2dB / 2050MHz

erweiterbar um 4 bzw. 8 Teilnehmer mit MSK54G oder MSK58G hohe Störstrahlsicherheit lange Lebensdauer durch optimale Wärmeableitung Für Wand- und Hutschienenmontage LNC - Spannungsversorgung durch Netzteil Ausgleichsverstärkung SAT und terrestrisch Umgebungstemperatur -20 ... +50° C Alle nicht benötigten Ausgänge mit Widerstand FR 75 abschließen Kurzschlusssicher Passender SAT - Verstärker MSV 411G ( 3,5...9,5dB) Passender SAT - Verstärker MSV 511G ( 3,5...9,5dB) Terr. - Verstärker MSV 511G ( 6...10dB) Passender Basisverstärker SAT MSV526NG (20...26dB) Terr. MSV526NG (26dB)