Best sellers

with 3 green LED for 3 phases, AC 230/400 W

Coupling contactor with screw connection, 3-pin, S0, AC-3, 400W

AC 400V/DC 250W, moulded material, contact-protected (BGW A2,) with cover, attachment to DIN rail, protection class IP 20 with connected conductors

CLASS 10, size S00, phase failure sensitive: yes, number of poles: 3

Power switch Size S00 for motor protection, CLASS 10 A tripping device 4.5...6,3 A N tripping device 82 A Screw connection Standard switching capability with transversal auxiliary switches 1S+1Ö power switches SIRIUS 3RV2 for motor protection for safe disconnection in case of short circuit and protection of consumers and system against overload, as well as for safe disconnection of the system from the mains. The compact and climate-resistant circuit breakers are optimized by their low waste heat for use in consumer branches, of course also for IE3/IE4 motors and equally for switching direct current. Worldwide approvals (e.g. IEC and UL/CSA) and applications in explosive applications (ATEX or IEC Ex) are of course. Equipment variants are available for engine protection (also with overload relay function), plant protection, short-circuit protection of starter combinations, transformer protection, as main and NOT-AUS switches and for use in IT networks. They are available with screw or spring tension connection for a fast, maintenance-free and vibration-proof connection, and optionally with built-in auxiliary switch. The comprehensive accessories, such as auxiliary switches, auxiliary triggers, alarm switches etc., are uniform for all sizes. The use of different energy feed possibilities, such as the associated feed system SIRIUS 3RV29, considerably reduces the main circuit wiring. The circuit breakers 3RV2 release the proven 3RV1 series. Easy, efficient, always up-to-date - the SIRIUS system kit.

with rotary drive according to DIN EN 60 204-1 lockable in 0 position with max. 3 padlocks, four-hole fastening, actuating element red/yellow

Extreme robustness and best contact reliability, coupling contactor with screw connection, 3-pin, S00, screw connection

Phase detector 3x LED, 230V 3x green switching devices for DIN rail mounting for controlling electrical systems. Switching devices for mounting the hat rails Siemens as an important component of the SENTRON components for electrical installation are used in control cabinets and distributors for switching, switching and switching of small loads. Whether with remote or manual switching, latching or touching function, for infrastructure or industrial requirements - Siemens offers switching devices for all applications and any field of application. Comfortable assembly and connection technology, uniform accessories and a continuous design - these are the characteristics of the device family. The switching devices of Siemens are characterized primarily by: 1. Extensive applications for switching and keys of small loads. 2. Easy to assemble and exchangeable accessories in wide variety. 3. Space-saving and simple hat rail mounting. 4. Combination with remote switch possible. 5. Reliable safety during installation thanks to standard grip and touch protection. 6. Optimum technology for your safety - only from Siemens. www.siemens.de/switchgeraete. Siemens provides a comprehensive portfolio of protection, switching, measuring and monitoring equipment, distribution systems and switches and sockets for safe, efficient electrical infrastructure in buildings and industry.

FI protection switch, 4-pin, type B, short-term delayed, In: 40 A, 300 mA, Un AC: 400 V The FI switch is the fault current protection device for contact protection The patented fault current protection devices of Siemens are an important part of the SENTRON protection components for electrical installation, because they prevent life-threatening current accidents due to safe disconnection of dangerous fault currents against Earth. Electrically ignited fires can already be prevented from arising. Whether by direct stirring of parts which are subject to stress in terms of operation or by indirect stirring of operating means, the protection is achieved above all by rapid switching off. The Siemens FI protection switches 5SV are characterized primarily by: 1. Comprehensive protection for persons and property values against electrical impact. 2. Whether sinusoidal alternating fault currents or smooth direct fault currents - Siemens offers the right type for all requirements and special designs. 3. Reliable safety during installation thanks to the standard protection of grip and touch. 4. Toolless release from the hat rail or from the busbar composite by comfortable slide-hand actuation. 5. Datamatrix code on the front of the device provides quick and easy all information about the FI circuit breaker. 6. Be protected as standard: The fault current protection switches correspond to the requirements of DIN VDE. 7. Optimum technology for your safety - only from Siemens. www.siemens.de/fault current protection. Siemens provides a comprehensive portfolio of protection, switching, measuring and monitoring equipment, distribution systems and switches and sockets for safe, efficient electrical infrastructure in buildings and industry.

NEOZED, safety base, D02, 1-pole, 63 A, Un AC: 400 V, Un DC: 250 V NEOZED safety base 5SG1, 5SG5 made of thermoset/form material. The NEOZED security system of Siemens as an important component of the SENTRON protection components for electrical installation offers effective personal, device and plant protection through safe disconnection in the overload and short circuit case. It is mainly used in distribution technology and in industrial switching systems. The system is laity-operable and also approved for house installation. The Siemens NEOZED safety base 5SG1, 5SG5 are characterized above all by: 1. Personal safety by contact-protected terminals at the entrance and exit. 2. Double clamping chambers in the comfort base allow the connection of two conductors of different cross-section. 3. Significantly more compact design compared to DIAZED, thereby saving space in the distributor. 4. NEOZED safety base made of molding material. 5. Visible, unambiguous and controllable connection of the conductors. This facilitates management introduction and saves working time. 6. Two types with different connection terminals increase the possibilities in the application. www.siemens.de/sicherungen. Siemens provides a comprehensive portfolio of protective, switching, measuring and monitoring equipment, installation distributors and switches and sockets for safe, efficient electrical infrastructure in buildings and industry.

NEOZED-Hold Spring NEOZED and DIAZED with extensive accessories. The NEOZED and DIAZED backup system of Siemens as an important component of the SENTRON protection components for electrical installation offers effective personal, device and plant protection through safe disconnection in the overload and short circuit case. It is mainly used in distribution technology and in industrial switching systems. The system is laity-operable and also approved for house installation. The Siemens NEOZED and DIAZED are characterized primarily by: 1. 2. Lock inserts from 2 A to 100 A in different operating classes. 3. Base designs in classic screw-socket technology. 4. Proven quality since 1906. www.siemens.de/sicherungen. Siemens provides a comprehensive portfolio of protective, switching, measuring and monitoring equipment, installation distributors and switches and sockets for safe, efficient electrical infrastructure in buildings and industry.

SENTRON, safety load disconnector 3NP1, 3-pin, NH00, 160 A, for installation and installation on mounting plate, flat connection, cover level 45mm safety load disconnector 3NP to 630 A with improved personal and plant protection and convenient connection technology. The safety load disconnectors protect plants in industry or infrastructure from overload and short circuit and are suitable for cross-industrial use. The standard grip and contact protection of the new Sentron 3NP1 series prevents the user from touching current-carrying parts during assembly of busbar systems, even with back access. In addition, the user can easily recognize the fuses used by the large viewing windows. The Siemens 3NP safety brakes are characterized primarily by: 1. Maximum flexibility thanks to modular design and complete accessories. 2. Suitable for floor mounting, hat rail, and Siemens busbar system 8US 3. Electronic safety monitoring function including network monitoring. 4. Five sizes from 100 A to 630 A to protection class IP40. 5. Fast and secure conversion for cable outlet at the top / bottom. 6. Flexible switching times of the auxiliary switch possible (current or forward). 7. Possibility to close and seal. www.siemens.de/switchgeraete. Siemens provides a comprehensive portfolio of protective, switching, measuring and monitoring equipment, installation distributors and switches and sockets for safe, efficient electrical infrastructure in buildings and industry.