Best sellers

Electric shock switch for 35 mm rails, 1 lock for 16 A / 250 W AC, contact material: Agsno2, max. Switching power at 230 W AC: AC1 4000 VA, AC15 750 VA, incandescent and halogen lamps 2000 W, fluorescent lamps compensated 750 W, fluorescent lamps uncompensated 1000 W, energy saving lamps 400 W, LED (230 W AC) 400 W, NV halogen lamps or LED with EEC 400 W, NV halogen lamps or LED with KWG 800 W

Heat resistant up to 105°C, halogen-free nominal cross-section: 10.0 mm2 wire cross-section: 2 x 10 mm2 sleeve length: 14 mm Colour: red

Keystone module Cat.6 Tool-free mounting. Practical cable sorter. Especially slim design. Standard Keystone format. Compatible with all common switch programs. Support from 10GBASE-T in the 4-Connector Channel to 500 Mhz according to TIA 568B.2-10 Cat.6 Channel. Exceeds the requirements of category 6 to 250 Mhz. Standard version: with separate screen contacting. Short version: 5 mm shorter for use in confined connection space. POE+ capable according to IEEE 802.3at standard. Version: Bush (Jack) Connectors: 1xrj45 8(8) Class: E Shield: Yes Category: 6 Model: Standard

C-profile rail C-profile rails for professional fastening of pipes and pipes. Profile: C-profile. Slot width: 17 mm. Type of hole: back holed. With three holes. Hole: 6,5x12 by mm; 8,7x20 of mm; 10,5x15 mm. Tested for laying fire protection cables according to DIN 4102-12 : 1998-11, with expert opinion (see www.protecclass.de). Material: steel. Surface: galvanized, transparent passivated Length: 500 mm Width: 35 mm Height: 18 mm Material thickness: 1.25 mm

Device connection box for the wall connection of electric stoves and similar applications (transition of rigid wiring to flexible wiring). Snap lid. Clamps with color coding corresponding to valid vein colors. WDE 0606-1 / EN 60670-1, 2005-10 and WDE 0606-22 / EN 60670-22, 2007-07. Cross section: 5 x 2.5 mm2. PHAD: Double cable outlet. Line connection: feed line: max. 4 mm2 rigid/multiplier; outlet: max. 2,5 mm2 with a core end sleeve; Screw connection (jack clamp). Number of clamping points: 5. Mounting: In standard switch box ø 60 mm, PHAD alternatiw screw fastening on plaster. Touch protection: fingerproof IP20. Safety: corners rounded assembly type: undercut

Main line branch terminals 35/25 mm2, 1-pole. Classy. Mounting on 35 mm support rail according to. EN 50022 / EN 60715. For example, for installation small distributors and counter positions according to WDE 0603. Installation small distributor and counter positions AC 400W. Main line branch terminals WDE 0603-2, connection material for low voltage circuits for household and similar purposes WDE 0613, Part 1 / EN 60998-1. Color coding corresponding to valid vein colors. Mounting horizontally or vertically. Voltage: 1000 W. WDE certified. Suitable for Cu and Al conductors. Inputs max. 35 mm2: 2nd outputs max. 25 mm2: 2nd clamping body: brass, (galvanized). Clamp screws: steel, galvanized. Insulation housing: plastic, (polyamide) impact-resistant, halogen-free. Main line 10 - 35 mm2 rigid/several, 3.5 Nm. Cutting line: 1.5 - 25 mm2 rigid/multiplier, 2.5 Nm. Stripping length 25 mm. Bushing clamp with 2 screws per clamping point screws with combination slot Pozidriv Z2. IP 20, fingerproof. Corners rounded. Number of poles: 1 colour: green

Temperature resistant up to 80°C. Length: 10 m. PMLV12, PMLV17, PMLV25: thickness 0.75 galvanized. PMLKU14, PMLKU19, PMLKU27: Thickness: 3.00 mm plastic coated, halogen-free. Hole distances: PMLV12: 9 mm, PMLV17: 12 mm, PMLV25: 14 mm, PMLKU14: 12 mm, PMLKU19 and PMLKU27: 15 mm Width: 12 mm Break load: 1700 N Hole-Ø: 5.1 mm

Branch boxes, without clamps Material: polypropylene, fiberglass reinforced. Sealing: thermoplastic elastomer. Housing of two components (robusted housing and elastic insertion membranes). Flame retardant according to EN 60695-2-11. Halogen-free. Impact resistant and UV-resistant. Type 308, 407 and 607 integrated thread (no mating nut required). Type 108, 407, 607 and 1010. Chemical resistance: resistant to alkalis and inorganic acids. Voltage cracking: low. Temperature resistance: -30°C to +100°C, short to approx. Installation temperature: -5°C to +60°C. Incandescent wire test: 750°C. Colour: grey. Mounting options: 4 internal openings (except type 108 with 2 internal openings) outside the sealing area or type 108, 308 and 407 with quick mounting brackets. 4 unreleasable lid screws. Protection type according to EN 60529. Protection type: IP 66; IP 67 with screw connections. In the case of design protection IP 66 - sweat water formation possible. By using casting gel or pressure compensation cable screw connections which serve to reduce condensation water, a condensation water formation can be strongly limited and the protection class IP 66 is maintained. Condensation water openings are present at the rear, the protection is reduced when punched out. Minimum order quantity: 1 piece External dimensions: 76x76x51 mm For cable Ø: 3-14 mm Max. Conductor cross-section: 2.5 mm2

SCHUKO® 2-pin + PE, 16 A Color: white SCHUKO angle connector made of thermoplastic, 2 polig + earth, 16A 250W, according to DIN 49440/441, color white

NH00 Locking inserts with metal handle tabs NH00 Low-voltage protection, according to DIN WDE 0636 part 2, nominal voltage: 500W AC / 220W DC, width: up to 100A 20 mm / from 125A 30 mm, NH000 to 100A / NH00 from 125A, voltage-carrying handle tab, operating class (gL)-gG full-range safety inserts (for cable and cable protection) for general applications

Field-free switch Self-learning field-free switch, interrupts the power supply after all downstream consumers and thus prevents disturbing electromagnetic fields, self-learning processor instead of setting buttons for the current thresholds, rated switching power 16 A/250 W AC self-learning field-free switch. Self-learning. Stand-by-loss only 0.8 Watt. Modern hybrid technology combines the advantages of wear-free electronic control with high switching power from special relays. The field-free switch interrupts the power supply after disconnection of downstream consumers and thus prevents interfering electromagnetic fields. Up to a current consumption of 200ma, small consumers are allowed which do not prevent field-free switching after larger consumers are switched off. The limit value does not have to be adjusted manually, but is learned by the FR12 using a patented method. Consumers with more than 200ma current consumption are always defined as consumers which are intended to cause the power supply to be switched on. As long as no larger consumer is switched on, the monitored circuit 1-pole remains switched off from the network. Neutral and protective conductors are not switched to prevent an antenna effect. An adjustable DC voltage with low residual ripple is present for monitoring. Therefore, a bridging of the working contact is not permissible and leads to destruction of the device. When a consumer is switched on, the field-free switch switches the monitored outer conductor with a delay of approx. 1 second and the LED lights red. Measurement voltage: 230 W

After running switch for installation not potential-free 10A/250V AC, stand-by-loss only 0.7 Watt, contact circuit in the zero passage for the protection of the contacts and consumers, state-of-the-art hybrid technology combines the advantages of wear-free electronic control with the high power of special relays, control voltage, supply and switching voltage 230W, follow-up time 1 to 12 minutes, response delay 0 to 12 minutes control voltage 1: 230 - 230 W. Time range from/to: 0 - 12 2. Time range from/to: 12 - 1 function: response and fall delay Number of locks: 1 switching power bulbs: 2000 W supply voltage range: 250 - 250 W installation height: 18 mm rated current at 250 W AC: 10 A switching power fluorescent lamps DUO: 1000 VA 1. Time range unit: minutes/hours 2. Time range unit: seconds/minutes assembly type: Unterputz follow-up switch 230W. 1 lock not potential-free 10A/250V AC. Stand-by-loss only 0.7 Watt. For installation. 45mm long, 45mm wide, 18mm deep. Contact circuit in the zero passage to protect the contacts and consumers. The most modern hybrid technology combines the advantages of wear-free electronic control with the high power of special relays. Control voltage, supply and switching voltage 230W. By using a bistable relay, there is no coil loss power and no heating as a result even in the switched-on state. After installation, wait for the automatic short synchronization before the switched consumer is placed on the network. Adjustable with the upper rotary switch for 1 to 12 minutes. Response delay 0 to 12 minutes with the lower rotary switch adjustable. Function: With the closing of the control contact (light switch), the response delay AV (if not set 0) begins, at whose end the fan is switched on wi