Hager

Sensor 16A 1 Open 230V AC with light indicator red 1PLE. Sensor with LED indicator lamp according to DIN VDE 632, touch protection according to DIN VDE 0106/100, marking option directly on the device.

Summer for DIN rail with protection against short circuit or overload through an integrated thermal switch on the primary side, continuous operation up to 1 hour. Total loss power at rated current:6,5 W

LED light indicator, red, 230VAC, QC rail passage

Performance: 8 VAOutput voltage: 8/12 VNumber of modules: 2AC voltage: 230 VInsulation voltage: 4000 VFrequency: 50 HzTotal power loss under rated current: 2.2 WConnection cross section for flexible conductor: 4mm2Connection cross section for rigid conductor: 6mm2Operating temperature: -20 to 35 °CHeight installed product: 111 mmWide installed product: 35 mmDeep installed product: 65 mm

Stair timing switch with low gear. At the time the lighting is limited. Automatic detection of the 3- or 4-wire connection. Hand switch at the Geraet - automatic or continuous lighting. AC voltage: 195/230/253 VFrequency: 50/60 HzContact type: 1SContact Loading: 16A 250V AC1max. Quiet current for probes: 100 mAMax. bulb load: 2300 WControl voltage AC current: 230 VAdjustment range delay time: 30S - 10MinConnection type: screw technologyConnection cross-section with flexible conductor: 1 - 6mm2Connection cross section for rigid conductor: 1.5 - 10mm2Operating temperature: -10 to 55 °CStorage temperature: -20 to 60 °CNumber of modules: 1Protection type: IP20Assembly type: DIN rail (REG)

Installation relays for pulse control of circuits up to max. 16 A, according to EN 61095 and DIN VDE 0637-3 as well as contact protection according to DIN VDE 0106 part 100. With contact position display by display window, integrated labeling field and suitable for subsequent installation of additional device. Notes: If several devices are installed directly, a spacer (1/2 PLE) must be installed next to each second device.Contact type: 2S nominal current: 16 AControl voltage AC current: 230 V Number of modules: 1 Rated operating voltage Ue: 230 V Frequency: 50/60 Hz

Anzahl Module:
1


Lampentyp:
LED


Betriebsnennspannung Wechselstrom:
230 V


Isolationsspannung:
250 V


Stoßspannungsfestigkeit:
4000 V


Frequenz:
50/60 Hz


Anschlussart:
QuickConnect


Gesamtverlustleistung unter Nennstrom:
0,8 W


Anschlussquerschnitt bei flexiblem Leiter:
1,5 - 2,5mm²


Anschlussquerschnitt bei starrem Leiter:
1,5 - 2,5mm²


Betriebstemperatur:
-20 bis 50 °C


Lagerungstemperatur:
-40 bis 80 °C


Höhe installiertes Produkt:
83 mm


Breite installiertes Produkt:
17,5 mm


Tiefe installiertes Produkt:
62 mm

Schuko socket, 3x rotatable, for Volta, for underput mounting, 650° socket 3x underput to 650°, protective contact socket with increased contact protection, prewired. Integrates in the cable entry slide with snap fastening. Mounted in all Volta sub-put housings in exchange of a slide. Three socket buttons are rotatable independently by 90°. Connection via WAGO connectors 1.5 - 2.5 mm2. A euro adapter is inserted for the protection class II (protection insulated). An overvoltage protection type 3 can be connected directly via parallel connection to the terminal. Height installed product:80 mmWide installed product:305 mmDeep Installed Product:45 mm

Lock size:D02Number of poles:3 PRated current for safety inserts:2/4/6/10/13/16/20/25/35 ARated current:63 AAssembly type:Rail systemHeight installed product:85 mmWide installed product:27 mmDeep Installed Product:77 mm

Frequency: 50/60 HzContact type: 1WContact Loading: AC1Max. bulb load: 450 WConnection type: screw technologyConnection cross-section with flexible conductor: 1 - 6mm2Connection cross section for rigid conductor: 1.5 - 10mm2Operating temperature: -20 to 50 °CStorage temperature: -40 to 70 °CNumber of modules: 1Protection type: IP40Assembly type: DIN rail (REG)

Remote dimmer 500W Universal, LED/ESL remote dimmer for controlling dimmable energy saving and LED lamps, bulbs, 230V halogen lamps and NV halogen lamps with coiled or electronic Trafo. Automatic load detection Detection method and learning function via external Taster. Memory function is used when switching on Activation of the last set value. With low space requirement and low standby consumption of 0,2W. Remote control of the dimmer by probe also illuminated possible. Electronic short circuit and over- Temperature protection. Frequency: 50/60 Hz Performance: 500 VA Performance of conventional transformer 230 V: 500 VA Power transformer/EVG 230 V: 500 VA Operating temperature: -20 to 50 °C Storage temperature: -20 to 50 °C Number of modules: 2 Protection type: IP20 Assembly type: DIN rail (REG) Load type: universal

Remote dimmer with automatic detection of load type. For controlling incandescent lamps, 230V halogen lamps and low voltage halogen lamps with electronic or wound transformers. Remote control of the dimmer by pushbutton (also illuminated: standby current up to 5 mA) and manual operation at the dimmer during local operation or with a control via a 1-10 V interface. Minimum and maximum dimming position on the device adjustable. Storage of the dimming setting when switching off or when network failure. Soft start function, integrated protection against load short circuit and electronic overtemperature protection with automatic power limitation, self-restoring.