Hager

Schuko socket, 3x rotatable, for Volta, for underput mounting, 650° socket 3x underput to 650°, protective contact socket with increased contact protection, prewired. Integrates in the cable entry slide with snap fastening. Mounted in all Volta sub-put housings in exchange of a slide. Three socket buttons are rotatable independently by 90°. Connection via WAGO connectors 1.5 - 2.5 mm2. A euro adapter is inserted for the protection class II (protection insulated). An overvoltage protection type 3 can be connected directly via parallel connection to the terminal. Height installed product:80 mmWide installed product:305 mmDeep Installed Product:45 mm

Smoke detector Standard KRIWAN Q, 3V DC, white. Smoke detectors with small size and attractive design language according to DIN EN 14604 with additional certification according to the increased testing requirements of Q certification based on vfdb guidelines 14-01 “Vereinigung zur Förderung des deutschen Brandschutz” (vfdb). Increased test criteria against the penetration of foreign bodies and increased protection against damp heat, oxidation and EMC, as well as better temperature change stress. Serves for early detection signaling fires with smoke development in the interior. Processor-controlled function self-test (all 10 sec.) and PGSA technology with independent algorythmic night-riggering when disturbing influences occur, such as dust, to maintain functional safety. Large function and reset button through the entire upper cover of the detector. Acoustic signal (85 dB at 3 m) and red flashing LED for alarming. Acoustic signal for battery wake, pollution or interference with acoustic signaling and yellow LED. Timely limited deactivation function of the smoke detection for suppression of deception alarms of the detector for approx. 12 minutes with automatic reset function in normal operation. Error messages can be delayed by 8 hours for 7 days by acknowledgement on the reset button. The fault of a contaminated detection unit cannot be reset as long as the fault message continues to exist in the evaluation unit. Ceiling mounting or wall mounting according to DIN14676. The detector has a camping/caravan registration. Disassembly and theft protection can be activated, then unlocking only with screw rotation with max. Size of 7mm possible. When turning into the socket, the detector is automatically activated.

Anzahl Module:
1


Lampentyp:
LED


Betriebsnennspannung Wechselstrom:
230 V


Isolationsspannung:
250 V


Stoßspannungsfestigkeit:
4000 V


Frequenz:
50/60 Hz


Anschlussart:
QuickConnect


Gesamtverlustleistung unter Nennstrom:
0,8 W


Anschlussquerschnitt bei flexiblem Leiter:
1,5 - 2,5mm²


Anschlussquerschnitt bei starrem Leiter:
1,5 - 2,5mm²


Betriebstemperatur:
-20 bis 50 °C


Lagerungstemperatur:
-40 bis 80 °C


Höhe installiertes Produkt:
83 mm


Breite installiertes Produkt:
17,5 mm


Tiefe installiertes Produkt:
62 mm

LED light indicator, red, 230VAC, QC rail passage

Sensor 16A 1 Open 230V AC with light indicator red 1PLE. Sensor with LED indicator lamp according to DIN VDE 632, touch protection according to DIN VDE 0106/100, marking option directly on the device.

Summer for DIN rail with protection against short circuit or overload through an integrated thermal switch on the primary side, continuous operation up to 1 hour. Total loss power at rated current:6,5 W

Blade 8-12V 5VA 1PLEBlade transformer with protection against short circuit or overload by an integrated thermal switch on the primary side. Number of modules: 1 Operating voltage AC: 8/12 V Frequency: 50/60 Hz

Performance: 8 VAOutput voltage: 8/12 VNumber of modules: 2AC voltage: 230 VInsulation voltage: 4000 VFrequency: 50 HzTotal power loss under rated current: 2.2 WConnection cross section for flexible conductor: 4mm2Connection cross section for rigid conductor: 6mm2Operating temperature: -20 to 35 °CHeight installed product: 111 mmWide installed product: 35 mmDeep installed product: 65 mm

Performance: 4 VAOutput voltage: 8/12 VNumber of modules: 2AC voltage: 230 VInsulation voltage: 4000 VFrequency: 50 HzTotal loss power at rated current: 1.8 WConnection cross section for flexible conductor: 4mm2Connection cross section for rigid conductor: 6mm2Operating temperature: -20 to 35 °CHeight installed product: 111 mmWide installed product: 35 mmDeep installed product: 65 mm

16A 250V 2.5PLE socket, QuickConnect socket SCHUKO with increased contact protection according to DIN VDE 0620 for installation in distributor with protection class II for mounting on DIN rail (TS 35) according to DIN EN 60715:2001-09. Rated current: 16 ANumber of modules: 2.5Connection type: plug connectionConnection cross section for rigid conductor: mini 2x1 mm2 - maxi 2x2,5 mm2Height installed product: 75 mmWide installed product: 44 mmDeep installed product: 66 mmRated voltage: 250 V

Switch with LED indicator lamp according to EN 60669-1/669-2-4 with VDE characters, IP2x touch protection after BGV A3. Suitable for retrofit installation of additional equipment; Labeling option directly on the device. Rated current: 16 ANumber of poles: 1 PNumber of modules: 1AC voltage: 230 VInsulation voltage: 440 VImpact strength: 4000 VFrequency: 50/60 HzConnection type: screw technologyTotal loss power at rated current: 0.4 WMachine life mechanical switching games: 200000Connection cross section for flexible conductor: 1.5 - 10mm2Connection cross section for rigid conductor: 1.5 - 16mm2Operating temperature: -20 to 50 °CStorage temperature: -40 to 80 °CHeight installed product: 83 mmWide installed product: 17.5 mmDeep installed product: 68 mm

Switch 16A 1 Locker 230V AC 1PLE Switch off according to EN 60669-1/669-2-4 with VDE characters, IP2x touch protection according to BGV A3. Suitable for retrofit installation of additional equipment; Labeling option directly on the device. Rated current: 16 ANumber of poles: 1 PNumber of modules: 1AC voltage: 230 VInsulation voltage: 440 VImpact strength: 4000 VFrequency: 50/60 HzConnection type: screw technologyTotal loss power at rated current: 0.4 WMachine life mechanical switching games: 200000Connection cross section for flexible conductor: 1.5 - 10mm2Connection cross section for rigid conductor: 1.5 - 16mm2Operating temperature: -20 to 50 °CStorage temperature: -40 to 80 °CHeight installed product: 83 mmWide installed product: 17.5 mmDeep installed product: 68 mm

Technical characteristicsRated current:6ANumber of modules:0.5AC voltage:OF 230/415 VInsulation voltage:4,000 VConnection type:Screw technologyTorque:1,2Device life, electrical switching games:6000Machine life mechanical switching games:12000Connection cross section for flexible conductor:6mm2Connection cross section for rigid conductor:10mm2Operating temperature:-25 to 60 °CStorage temperature:-40 to 80 °CHeight installed product:80 mmWide installed product:9.5 mmDeep Installed Product:40 mm

Selective Part Lock - Switch-Safety Unit INON with Lock, D01-10A

Lock size:D02Number of poles:3 PRated current for safety inserts:2/4/6/10/13/16/20/25/35 ARated current:63 AAssembly type:Rail systemHeight installed product:85 mmWide installed product:27 mmDeep Installed Product:77 mm