Hager

Stair timing switch with low gear. At the time the lighting is limited. Automatic detection of the 3- or 4-wire connection. Hand switch at the Geraet - automatic or continuous lighting. AC voltage: 195/230/253 VFrequency: 50/60 HzContact type: 1SContact Loading: 16A 250V AC1max. Quiet current for probes: 100 mAMax. bulb load: 2300 WControl voltage AC current: 230 VAdjustment range delay time: 30S - 10MinConnection type: screw technologyConnection cross-section with flexible conductor: 1 - 6mm2Connection cross section for rigid conductor: 1.5 - 10mm2Operating temperature: -10 to 55 °CStorage temperature: -20 to 60 °CNumber of modules: 1Protection type: IP20Assembly type: DIN rail (REG)

Remote switch 1 Locker 230V AC 16A 1PLEremote switch for pulse control of lighting circuits and others Built according to EN60669-1; EN60669-2-2. Fingerproof according to BGVA2. Contact position display and manual operation. Labeling option directly on the device. Contact type: 1S Number of contacts: 1 Rated current: 16 A Control voltage AC current: 230 V Control voltage DC current: 110 V Number of modules: 1 Operating voltage AC current: 250 V Isolation voltage: 250 V Frequency: 50/60 Hz Connection type: Screw technology Connection cross-section at rigid conductor: 1.5 - 10mm2 Operating temperature: -5 to 40 °C Storage temperature: -40 to 80 °C

Remote switch 2 closer 230V AC 110V DC 16A 1PLE. Remote switch for pulse control according to EN60669-1 and EN60669-2-2 and finger protection according to BGVA2. With contact position display, manual operation, marking option directly on the device and suitable for subsequent installation of additional devices.

Installation relays for pulse control of circuits up to max. 16 A, according to EN 61095 and DIN VDE 0637-3 as well as contact protection according to DIN VDE 0106 part 100. With contact position display by display window, integrated labeling field and suitable for subsequent installation of additional device. Notes: If several devices are installed directly, a spacer (1/2 PLE) must be installed next to each second device.Contact type: 2S nominal current: 16 AControl voltage AC current: 230 V Number of modules: 1 Rated operating voltage Ue: 230 V Frequency: 50/60 Hz

auxiliary switch 6A 1 closer and 1 opener 230V

Remote dimmer with automatic detection of load type. For controlling incandescent lamps, 230V halogen lamps and low voltage halogen lamps with electronic or wound transformers. Remote control of the dimmer by pushbutton (also illuminated: standby current up to 5 mA) and manual operation at the dimmer during local operation or with a control via a 1-10 V interface. Minimum and maximum dimming position on the device adjustable. Storage of the dimming setting when switching off or when network failure. Soft start function, integrated protection against load short circuit and electronic overtemperature protection with automatic power limitation, self-restoring.

Remote dimmer 500W Universal, LED/ESL remote dimmer for controlling dimmable energy saving and LED lamps, bulbs, 230V halogen lamps and NV halogen lamps with coiled or electronic Trafo. Automatic load detection Detection method and learning function via external Taster. Memory function is used when switching on Activation of the last set value. With low space requirement and low standby consumption of 0,2W. Remote control of the dimmer by probe also illuminated possible. Electronic short circuit and over- Temperature protection. Frequency: 50/60 Hz Performance: 500 VA Performance of conventional transformer 230 V: 500 VA Power transformer/EVG 230 V: 500 VA Operating temperature: -20 to 50 °C Storage temperature: -20 to 50 °C Number of modules: 2 Protection type: IP20 Assembly type: DIN rail (REG) Load type: universal

Frequency: 50/60 HzContact type: 1WContact Loading: AC1Max. bulb load: 450 WConnection type: screw technologyConnection cross-section with flexible conductor: 1 - 6mm2Connection cross section for rigid conductor: 1.5 - 10mm2Operating temperature: -20 to 50 °CStorage temperature: -40 to 70 °CNumber of modules: 1Protection type: IP40Assembly type: DIN rail (REG)

busbar clamp 1.5mm2-16mm2, for busbars 12-40x10mm, for Cu conductor

busbar clamp 4mm2-35mm2, for busbars 12-40x5mm, for Cu conductor

busbar clamp 16mm2-70mm2, for busbars 12-40x5mm, for Cu conductor

Height installed product: 175 mmWide installed product: 42 mmDeep installed product: 42 mm

Lock size:D02Number of poles:3 PRated current for safety inserts:2/4/6/10/13/16/20/25/35 ARated current:63 AAssembly type:Rail systemHeight installed product:85 mmWide installed product:27 mmDeep Installed Product:77 mm

Selective Part Lock - Switch-Safety Unit INON with Lock, D01-10A

Technical characteristicsRated current:6ANumber of modules:0.5AC voltage:OF 230/415 VInsulation voltage:4,000 VConnection type:Screw technologyTorque:1,2Device life, electrical switching games:6000Machine life mechanical switching games:12000Connection cross section for flexible conductor:6mm2Connection cross section for rigid conductor:10mm2Operating temperature:-25 to 60 °CStorage temperature:-40 to 80 °CHeight installed product:80 mmWide installed product:9.5 mmDeep Installed Product:40 mm