Hager ERC216 Installationsrelais , 16A, 2S, 230V
Hager ERC216 Installation relays , 16A, 2S, 230V
2-5 days
Installation relays for pulse control of circuits up to max. 16 A, according to EN 61095 and DIN VDE 0637-3 as well as contact protection according to DIN VDE 0106 part 100. With contact position display by display window, integrated labeling field and suitable for subsequent installation of additional device. Notes: If several devices are installed directly, a spacer (1/2 PLE) must be installed next to each second device.Contact type: 2S nominal current: 16 AControl voltage AC current: 230 V Number of modules: 1 Rated operating voltage Ue: 230 V Frequency: 50/60 Hz
€38.25
Hager TG600AL Rauchwarnmelder Standard KRIWAN Q, 3V DC, weiß
Hager TG600AL smoke alarm standard KRIWAN Q, 3V DC, white
2-5 days
Smoke detector Standard KRIWAN Q, 3V DC, white. Smoke detectors with small size and attractive design language according to DIN EN 14604 with additional certification according to the increased testing requirements of Q certification based on vfdb guidelines 14-01 “Vereinigung zur Förderung des deutschen Brandschutz” (vfdb). Increased test criteria against the penetration of foreign bodies and increased protection against damp heat, oxidation and EMC, as well as better temperature change stress. Serves for early detection signaling fires with smoke development in the interior. Processor-controlled function self-test (all 10 sec.) and PGSA technology with independent algorythmic night-riggering when disturbing influences occur, such as dust, to maintain functional safety. Large function and reset button through the entire upper cover of the detector. Acoustic signal (85 dB at 3 m) and red flashing LED for alarming. Acoustic signal for battery wake, pollution or interference with acoustic signaling and yellow LED. Timely limited deactivation function of the smoke detection for suppression of deception alarms of the detector for approx. 12 minutes with automatic reset function in normal operation. Error messages can be delayed by 8 hours for 7 days by acknowledgement on the reset button. The fault of a contaminated detection unit cannot be reset as long as the fault message continues to exist in the evaluation unit. Ceiling mounting or wall mounting according to DIN14676. The detector has a camping/caravan registration. Disassembly and theft protection can be activated, then unlocking only with screw rotation with max. Size of 7mm possible. When turning into the socket, the detector is automatically activated.
€28.41
Hager EZN006 time relay,multifunction,1W,10A
Hager EZN006 time relay,multifunction,1W,10A
2-5 days
Frequency: 50/60 HzContact type: 1WContact Loading: AC1Max. bulb load: 450 WConnection type: screw technologyConnection cross-section with flexible conductor: 1 - 6mm2Connection cross section for rigid conductor: 1.5 - 10mm2Operating temperature: -20 to 50 °CStorage temperature: -40 to 70 °CNumber of modules: 1Protection type: IP40Assembly type: DIN rail (REG)
€103.75
Hager VZ00UP UP socket, 3x, rotatable, for Volta, for under-put mounting, 650° in slide integrier
Hager VZ00UP UP socket, 3x, rotatable, for Volta, for under-put mounting, 650° in slide integrier
4-9 days
Schuko socket, 3x rotatable, for Volta, for underput mounting, 650° socket 3x underput to 650°, protective contact socket with increased contact protection, prewired. Integrates in the cable entry slide with snap fastening. Mounted in all Volta sub-put housings in exchange of a slide. Three socket buttons are rotatable independently by 90°. Connection via WAGO connectors 1.5 - 2.5 mm2. A euro adapter is inserted for the protection class II (protection insulated). An overvoltage protection type 3 can be connected directly via parallel connection to the terminal. Height installed product:80 mmWide installed product:305 mmDeep Installed Product:45 mm
€72.04
Hager EMN001 stairlight time switch
Hager EMN001 stairlight time switch
2-5 days
Stair timing switch with low gear. At the time the lighting is limited. Automatic detection of the 3- or 4-wire connection. Hand switch at the Geraet - automatic or continuous lighting. AC voltage: 195/230/253 VFrequency: 50/60 HzContact type: 1SContact Loading: 16A 250V AC1max. Quiet current for probes: 100 mAMax. bulb load: 2300 WControl voltage AC current: 230 VAdjustment range delay time: 30S - 10MinConnection type: screw technologyConnection cross-section with flexible conductor: 1 - 6mm2Connection cross section for rigid conductor: 1.5 - 10mm2Operating temperature: -10 to 55 °CStorage temperature: -20 to 60 °CNumber of modules: 1Protection type: IP20Assembly type: DIN rail (REG)
€36.35
Hager SU215 Summer 230V/0,03A, 6.5VA 1 PLE
Hager SU215 Summer 230V/0,03A, 6.5VA 1 PLE
2-8 days
Summer for DIN rail with protection against short circuit or overload through an integrated thermal switch on the primary side, continuous operation up to 1 hour. Total loss power at rated current:6,5 W
€29.61
Hager SNS016 socket 16A 250V 2.5PLE, QC
Hager SNS016 socket 16A 250V 2.5PLE, QC
2-5 days
16A 250V 2.5PLE socket, QuickConnect socket SCHUKO with increased contact protection according to DIN VDE 0620 for installation in distributor with protection class II for mounting on DIN rail (TS 35) according to DIN EN 60715:2001-09. Rated current: 16 ANumber of modules: 2.5Connection type: plug connectionConnection cross section for rigid conductor: mini 2x1 mm2 - maxi 2x2,5 mm2Height installed product: 75 mmWide installed product: 44 mmDeep installed product: 66 mmRated voltage: 250 V
€11.92
Hager ST303 Bladel Transformer prim. 230VAC sec. 8/12VAC 8VA 2TE
Hager ST303 Bladel Transformer prim. 230VAC sec. 8/12VAC 8VA 2TE
2-5 days
Performance: 8 VAOutput voltage: 8/12 VNumber of modules: 2AC voltage: 230 VInsulation voltage: 4000 VFrequency: 50 HzTotal power loss under rated current: 2.2 WConnection cross section for flexible conductor: 4mm2Connection cross section for rigid conductor: 6mm2Operating temperature: -20 to 35 °CHeight installed product: 111 mmWide installed product: 35 mmDeep installed product: 65 mm
€33.62
Hager ST301 Blade Transformer prim. 230VAC sec. 8/12VAC 4VA 2TE
Hager ST301 Blade Transformer prim. 230VAC sec. 8/12VAC 4VA 2TE
2-5 days
Performance: 4 VAOutput voltage: 8/12 VNumber of modules: 2AC voltage: 230 VInsulation voltage: 4000 VFrequency: 50 HzTotal loss power at rated current: 1.8 WConnection cross section for flexible conductor: 4mm2Connection cross section for rigid conductor: 6mm2Operating temperature: -20 to 35 °CHeight installed product: 111 mmWide installed product: 35 mmDeep installed product: 65 mm
€25.29