List of products by brand Protec

Device connection box for the wall connection of electric stoves and similar applications (transition of rigid wiring to flexible wiring). Snap lid. Clamps with color coding corresponding to valid vein colors. VDE 0606-1 / EN 60670-1, 2005-10 and VDE 0606-22 / EN 60670-22, 2007-07. Cross-section: 5 x 25 mm2. PHAD: Double cable outlet. Line connection: feed line: max. 4 mm2 rigid/multiplier; outlet: max. 2,5 mm2 with a core end sleeve; Screw connection (jack clamp). Number of clamping points: 5. Mounting: In standard switch box ø 60 mm, PHAD alternative screw fastening on plaster. Touch protection: fingerproof IP20. Safety: corners rounded assembly type: plaster/underput

Diaphragm sleeve 2 Components Polypropylene / thermoplastic elastomer, dustproof, for use with mating nut or in existing thread, silicone-free, plug-in length: 9.5 mm, glow wire test: 750° nominal size: M 16 cable-Ø: 1 - 9 mm protection type (IP): IP66 Material: plastic Halogen-free: Yes Colour: light grey

Conductor terminals for mounting on DIN rails, e.g. for small installation distributors and counters acc. WDE 0603 Clamping points: 7 or 12. Clamp: brass, cross section 6 mm x 9 mm. Screws: M5, steel, galvanized/passivated (Cr-VI-free). Housing: polyamide, impact resistant, flameproof. Corners rounded. Line connection: 1 ... 16 mm2 rigid / 1 ... 10 mm2 fine-wired with wire end sleeve (round pressing or square pressing, trapezoidal pressing up to 6 mm2) screw connection, recommended. Applying torque 1.2 Nm.- Standards / Requirements: Connecting material for low voltage circuits for household and similar purposes WDE 0613, EN 60998. Mounting: On DIN support rail according to EN 50022 / EN 60715. Nominal current: 63 A. Insulation voltages: 690 W (distributor and control cabinet inlet, degree of contamination 2). 500 W pollution level 3) Uimp = 6 kw. Touch protection: IP00 Type additive Ä-F2 –: IP20, fingerproof. Screw terminal. Combi-cross slot Z2 (positive).

Cover strip PWTSC, suitable for all distribution types Width in division units: 12 Color: white RAL number: 9010

Type of cable: 36 mm

Wiring bridges GS/GS assembled wiring bridges. For wiring of LS,- FI,- and similar switching devices. For example, for installation small distributors and counter positions according to WDE 0603. EN 60439-1 / WDE 0660, part 500. WDE 0100, part 523: 6 mm2: max. 54 A, 10 mm2: max. 73 A. Rated voltage: 450 / 750 W. Insulation material: PWTSC (type of lead H07V-K). Head: Flexible. Cable end: On both sides fork shoe for M5 screw connection. Color: black. Length: 265 mm cross-section: 10 mm2

Wiring bridges AE/AE. For wiring of LS,- FI,- and similar switching devices. For example, for installation small distributors and counter positions according to WDE 0603. EN 60439-1 / WDE 0660, part 500. WDE 0100, part 523: 6 mm2: max. 54 A, 10 mm2: max. 73 A. Rated voltage: 450 / 750 W. Insulation material: PWTSC (type of lead H07V-K). Head: Flexible. Cable end: Aderend sleeve on both sides. Color: black. Length: 265 mm cross-section: 6 mm2

Shrink hoses, medium-walled With adhesive inner coating, shrinkage rate 4:1, resistant to oils, fats, acids, alkalis, salts, solvents and UV rays, wall thickness 2.5 mm, silicone-free, impact strength: 25 kV/mm Colour: black Length: 1 m Operating temperature range: -40 - 120 °C With internal adhesive: Yes Shrink rate: 3:1 Shrinkage strength: 22 - 6 mm

Wiring bridges AE/AE. For wiring of LS,- FI,- and similar switching devices. For example, for installation small distributors and counter positions according to WDE 0603. EN 60439-1 / WDE 0660, part 500. WDE 0100, part 523: 6 mm2: max. 54 A, 10 mm2: max. 73 A. Rated voltage: 450 / 750 W. Insulation material: PWTSC (type of lead H07V-K). Head: Flexible. Cable end: Aderend sleeve on both sides. Color: blue. Minimum order quantity: 1 piece length: 133 mm cross section: 10 mm2

Wiring bridges AE/AE Finished wiring bridges on both sides. For wiring of LS,- FI,- and similar switching devices. For example, for installation small distributors and counter positions according to WDE 0603. Standards: EN 60439-1 / WDE 0660, part 500 .Power-bearing capacity: WDE 0100, part 523: 6 mm2: max. 54 A. Rated voltage: 450 / 750 W. Insulation material: PWTSC (type of lead H07V-K). Head: Flexible. Cable end: Aderend sleeve on both sides.Colour: blue.

Insulated end sleeves DIN 46228 part 4, halogen-free and heat-resistant up to 110°C Nominal cross-section: 10.0 mm2 Sleeve length: 12 mm Colour: red

Insulated end sleeves DIN 46228 part 4, halogen-free and heat-resistant up to 110°C Nominal cross-section: 2.5 mm2 Sleeve length: 12 mm Colour: blue