List of products by brand Protec

Fitting key DIN WDE 0636-3. Size: D01 - D03. Suitable for all sleeve adapters D01-D03. Color: red, similar RAL 2002 Material Handle: plastic

Soldering tine flux-filled, halogen-containing soft soldering wire. Lead-containing, high temperature resistance, flux-medium residues do not cause any corrosion in non-ferrous metals and can therefore remain on the soldering site. Flow medium according to DIN EN 29454.1, 1.1.2.B and DIN EN 61190-1-3, ROM1. For manual and machine soldering, Sn 60 Pb 40. Flow percentage: 2.5 % Diameter: 1 mm Weight: 250 g

Pressing cable shoes DIN 46235 except Art.-Nr. 05103850, for circular conductors according to WDE 0295 Class: 1 (massiw conductor) with solid conductor, the processor has the suitability of the cable used, if necessary by testing a pull-out test, 2 (multi-wire conductor,) 5 (flexible conductor) and 6 (high-flexible conductor,) Application e.g. power supply, Cu-ETP according to DIN EN 13600, galv. Sn, heat-resistant up to +125°C, with characteristic for unique tool assignment, suitable tool: PPZPKS 6-50, PPZPKS 10-120, PPZKS 6-300. Minimum order quantity: 1 piece. Connection thread dimension metric: 8 cross section: 16.0 mm2

Surface PSKAS M6 - PSKAS M30: Galv. galvanized according to DIN 50961, thick-layer passivated, surface PSKAS M38 - PSKAS M60: Send. galvanized according to EN 10327, tested according to DIN 4102-12 : 1998-11 (part 1: cable laying with clamps) for laying fire protection cables, with good-night connection class. Minimum order quantity: 1 piece. Diameter of/to: 25 - 27 mm

Pipe end sleeve for plugging on electrical installation pipes (steel fitting pipes, aluminium pipes and stainless steel pipes). Material polyethylene. Halogen-free. Colour: light grey Thread: M 32 Rated diameter: 35.4 mm Length: 34 mm

Thermoplastic flame-retardant material, IP55 with condensation water opening, bottom inserts M20, external fastening points, opening cutter, halogen-free, protection type: IP 54, application temperature range: -25 °C to 40 °C, color: grey. Depth: 37 mm. Length: 100 mm Width: 100 mm Depth: 42 mm Number of inserts: 12

Main line branch terminals 35/25 mm2, 1-pole. Classy. Mounting on 35 mm support rail according to. EN 50022 / EN 60715. For example, for installation small distributors and counter positions according to WDE 0603. Installation small distributor and counter positions AC 400W. Main line branch terminals WDE 0603-2, connection material for low voltage circuits for household and similar purposes WDE 0613, Part 1 / EN 60998-1. Color coding corresponding to valid vein colors. Voltage: 1000 W. WDE certified. Suitable for Cu and Al conductors. Inputs max. 35 mm2: 2. Outputs max. 25 mm2: 4. Clamp body: brass, (galvanized). Clamp screws: steel, galvanized. Insulation housing: plastic, (polyamide) impact-resistant, halogen-free. Main line 10 - 35 mm2 rigid/several, 3.5 Nm. Cutting line: 1.5 - 25 mm2 rigid/multiplier, 2.5 Nm. Stripping length 25 mm. Bushing clamp with 2 screws per clamping point screws with combination slot Pozidriv Z2. IP 20, fingerproof. Corners rounded. Number of poles: 1 Colour: blue

Main line branch terminals 35/25 mm2, 1-pole. Classy. Mounting on 35 mm support rail according to. EN 50022 / EN 60715. For example, for installation small distributors and counter positions according to WDE 0603. Installation small distributor and counter positions AC 400W. Main line branch terminals WDE 0603-2, connection material for low voltage circuits for household and similar purposes WDE 0613, Part 1 / EN 60998-1. Color coding corresponding to valid vein colors. Voltage: 1000 W. WDE certified. Suitable for Cu and Al conductors. Inputs max. 35 mm2: 2. Outputs max. 25 mm2: 4. Clamp body: brass, (galvanized). Clamp screws: steel, galvanized. Insulation housing: plastic, (polyamide) impact-resistant, halogen-free. Main line 10 - 35 mm2 rigid/several, 3.5 Nm. Cutting line: 1.5 - 25 mm2 rigid/multiplier, 2.5 Nm. Stripping length 25 mm. Bushing clamp with 2 screws per clamping point screws with combination slot Pozidriv Z2. IP 20, fingerproof. Corners rounded. Number of poles: 1 colour: green

Flame resistance 850°C according to WDE 0606 Part 1 / DIN IEC 695 Part 2-1, milling hole: 68 mm, for plate thickness from 7 to max. 35 mm, opening for pipes and pipes, material: polypopylene, with cladding connection fitting Design: with 2 screw screws Diameter: 68 mm Depth: 47 mm Colour: orange

Heat resistant up to 105°C, halogen-free nominal cross-section: 6.0 mm2 wire cross-section: 2 x 6 mm2 sleeve length: 14 mm Colour: yellow

Elastomer protective contact coupling with cover. 2-pin + PE. Rated voltage: AC 250 W. Rated current: 16 A. Design: DIN 49 440-1-D. Contacts: Cuzn 37. Contact carrier: PA6 polyamide. Housing: TPE elastomer. Cover: TPE elastomer. With 2 protective contact systems. Snap-locking. Spray water protection. For cable types up to H07RN-F 3 G2.5. Connection technology: screw clamp Colour: black Protection type (IP): IP44

End sleeves Without plastic sleeve according to DIN 46228 Part 1. Surface: galvanized. Material: Copper. Nominal cross-section: 1.5 mm2 sleeve length: 10 mm