List of products by brand ABB

The CM series current monitoring relays protect single-phase networks (DC or AC) from overflows between 3 ma and 15 A. The devices with the maximum measuring range of 1 A are available in two different connection versions. You have the choice between the proven screw connection technology (double chamber box connection terminals) and the toolless Easy Connect connection technology (push-in terminals). Devices with a measuring range of 15 A are available with screw connection technology.

Overvoltage protection devices SPD type 2 with the QuickSafe® thermal monitoring are designed for protection in indirect lightning effects and in switching overvoltages. They are built as close as possible to the feed point of the electrical system. All OVR T2 consist of a base part and an interchangeable protection module. They are equipped with a mechanical function display and the TS variants have a potential-free alternating contact. They are compatible with the System per M compact series and can be saved with them via phase rails. Main application in sub-distributions and end circuits.

The media distributors of the UK600 series are designed for under-put assembly. They convince with many new and unique technical features. Thus, an up to 200 % larger connection space allows easy and efficient installation of the devices. Through the generous space, all conceivable devices such as routers or other media modules find their safe place. Modular perforated plate mounting plates allow easy installation of the devices and an integrated rotatable 3-way socket ensures the power supply. With an optional removable frame, the UK600 is turned to eye-catching and integrated into any environment. The distributions can be used in undercut and hollow wall mounting and have a WDE license plate. Applicable standards: DIN 43871, DIN EN 60670-24, WDE 0606-24

The media distributors of the UK600 series are designed for under-put assembly. They convince with many new and unique technical features. Thus, an up to 200 % larger connection space allows easy and efficient installation of the devices. Through the generous space, all conceivable devices such as routers or other media modules find their safe place. Modular perforated plate mounting plates allow easy installation of the devices and an integrated rotatable 3-way socket ensures the power supply. With an optional removable frame, the UK600 is turned to eye-catching and integrated into any environment. The distributions can be used in undercut and hollow wall mounting and have a WDE license plate. Applicable standards: DIN 43871, DIN EN 60670-24, WDE 0606-24

The media distributors of the UK600 series are designed for under-put assembly. They convince with many new and unique technical features. Thus, an up to 200 % larger connection space allows easy and efficient installation of the devices. Through the generous space, all conceivable devices such as routers or other media modules find their safe place. Modular perforated plate mounting plates allow easy installation of the devices and an integrated rotatable 3-way socket ensures the power supply. With an optional removable frame, the UK600 is turned to eye-catching and integrated into any environment. The distributions can be used in undercut and hollow wall mounting and have a WDE license plate. Applicable standards: DIN 43871, DIN EN 60670-24, WDE 0606-24

The following values are output via a seven-segment display with up to 7 digits: active energy (class 1), power, currents, voltages (L-L; L-N) and frequency, both per phase and total. The communication can take place via the integrated infrared interface for connecting a KNX module. The energy meter has an output. This can optionally be used as a pulse output for outputting the active energy or as an alarm output. Up to 25 alarm values (swell values with time delay) can be set here. The counter is calibrated according to MID and approved according to IEC. The installation width is 4 DIN modules.

The device queries 4 potential-free contacts with internally generated interrogation voltage. The input state is displayed via 4 yellow LED’s. Binary inputs enable a total of 4 input signals (in 2 groups). Each channel has a button for manual operation. The devices are used by ABB i-bus® supplies and does not require additional power supply.

The device records four AC/DC signals in the voltage range of 10...230 V. The input state is displayed via 4 yellow LED’s. Binary inputs enable a total of 4 input signals (in 2 groups). Each channel has a button for manual operation. The devices are used by ABB i-bus® supplies and does not require additional power supply.

The electromotive actuator ST/K 1.1 is a proportional actuator for controlling radiator valves via ABB i-bus®. The actuator is mounted on thermostat valve bottom parts (accessible valve adapter VA10, VA78 included). The control takes place via a steady EIB / KNX room temperature controller. The actual valve position is indicated by 5 LEDs. Furthermore, the electromotive actuator ST/K 1.1 has two binary inputs which can be used, for example, for connecting a presence contact and/or window contact. The status of these inputs can be sent to the EIB / KNX.

The KNX voltage supply 320 ma generates and monitors the KNX system voltage (SELV). With the integrated throttle, the bus line is decoupled from the voltage supply. The voltage output is short-circuit-proof and overload-proof. The two-color LED indicates the status of the device. The voltage supply has a wide-range input for the supply voltage in the range 85Å265 W AC, 50/60 Hz.

Switches independent electrical consumers via potential-free contacts 4 ABB i-bus®. The manual operation of the contact is possible for each output. The switching state of the contact is displayed. The 10AX-AC1 series is particularly suitable for switching ohmic, inductive and capacitive loads, as well as fluorescent lamp loads (AX) according to DIN EN 60669.

Overvoltage protection devices SPD type 2 with the QuickSafe® thermal monitoring are designed for protection in indirect lightning effects and in switching overvoltages. They are built as close as possible to the feed point of the electrical system. All OVR T2 consist of a base part and an interchangeable protection module. They are equipped with a mechanical function display and the TS variants have a potential-free alternating contact. They are compatible with the System per M compact series and can be saved with them via phase rails. Main application in sub-distributions and end circuits.