List of products by brand ABB

MS132 motor protection switch with thermal and electromagnetic protection stands for the compact and high-performance series with high short-circuit power for motor protection up to 15 kw (400 W) with a module width of 45 mm. The temperature-compensated device has a rotary handle operation with a clear switching position indicator I/TRIP/0. In addition, MS132 has a short-circuit display. The rotary handle can be locked directly in the 0 position by means of a padlock. Auxiliary, signal- and co-locking contacts as well as undervoltage and working current triggers can be installed without tools. 3-phase rails for 65 A or for 100 A and feed blocks for 25 mm2 or. 35 mm2 allow the common supply of several motor protection switches. Protective housing as well as accessories for control cabinet and door mounting supplement the range. Atex certification allows the protection of engines in the ex-field, UL approval as "Self protected combination motor cotroller" extends the field of use in North America.

Fault arc protection device (AFDD) with automatic fuse (MCB) according to IEC/EN 62606 (WDE 0665-10) and IEC/EN 60898-1 (WDE 0641-11) provide protection against serial and parallel fault arcs, protection against overcurrent (overload or short circuit), protection against overvoltage (only for AFDD internal) and protection against electrically ignited fires according to DIN20WDE 0. Mandatory areas of application according to DIN WDE 01000 are in single-phase AC voltage systems with In = 16 A in sleeping or staying areas of homes and day-to-day facilities for children, disabled or old people or barrier-free homes, as well as in rooms or places with fire risk (with special fire risk, fire-prone facilities), predominantly/mainly from combustible building materials (classification of combustability of building materials). It is recommended to use Afds in rooms with sleeping facilities, rooms or places with a fire-promoting structure and high connection power terminal circuits. In general, the AFDD is also recommended to increase fire protection against electrically ignited fires. LED indicator to identify the cause of triggering. Feeding from above or below as desired, transverse wiring, for example to FI protection switches in the rear terminal area, is possible. Accessory of the system per M compact®. IEC/EN 60898-1 Icn=6kA. AFDD+MCB S-ARC1 is 1polig protected (LS), switching 2polig.

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN WDE 0100-430 and DIN WDE 0100-530. They meet the construction requirements DIN WDE 0641-11 and IEC/EN 60898-1, DIN WDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN WDE 0100-430 and DIN WDE 0100-530. They meet the construction requirements DIN WDE 0641-11 and IEC/EN 60898-1, DIN WDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

Fault arc protection device (AFDD) with automatic fuse (MCB) according to IEC/EN 62606 (WDE 0665-10) and IEC/EN 60898-1 (WDE 0641-11) provide protection against serial and parallel fault arcs, protection against overcurrent (overload or short circuit), protection against overvoltage (only for AFDD internal) and protection against electrically ignited fires according to DIN20WDE 0. Mandatory areas of application according to DIN WDE 01000 are in single-phase AC voltage systems with In = 16 A in sleeping or staying areas of homes and day-to-day facilities for children, disabled or old people or barrier-free homes, as well as in rooms or places with fire risk (with special fire risk, fire-prone facilities), predominantly/mainly from combustible building materials (classification of combustability of building materials). It is recommended to use Afds in rooms with sleeping facilities, rooms or places with a fire-promoting structure and high connection power terminal circuits. In general, the AFDD is also recommended to increase fire protection against electrically ignited fires. LED indicator to identify the cause of triggering. Feeding from above or below as desired, transverse wiring, for example to FI protection switches in the rear terminal area, is possible. Accessory of the system per M compact®. IEC/EN 60898-1 Icn=6kA. AFDD+MCB S-ARC1 is 1polig protected (LS), switching 2polig.

Protector AF09 to AF96 from 4 to 45 kw AC-3 (400 W) stand for the compact series with AC/DC control and very wide coil voltage ranges. Only 4 coils cover control voltages from 20...500 WDC to 24...500 VAC - without additional required extinguishing elements. They can therefore be used worldwide and only in low variance. They switch power circuits with motors, slightly inductive or non-inductive loads. Flexible exchangeable coil connection terminals allow the connection from above, from below or from above and below. Attachable accessories are 1- and 4-pole auxiliary switches that can be plugged on the front side and 2-pole auxiliary switches that can be mounted on the right and left side. A further auxiliary switch block with 1S+1Ö and coil connections A1 and A2 is available until AF65. All auxiliary contacts are designed as mirror contacts according to IEC60947-5-1 Annex L. Other accessories such as timepieces, wiring aids and locking members, among others, complement the range.

Overvoltage protection devices SPD type 2 with the QuickSafe® thermal monitoring are designed for protection in indirect lightning effects and in switching overvoltages. They are built as close as possible to the feed point of the electrical system. All OVR T2 consist of a base part and an interchangeable protection module. They are equipped with a mechanical function display and the TS variants have a potential-free alternating contact. They are compatible with the System per M compact series and can be saved with them via phase rails. Main application in sub-distributions and end circuits.

With the three-phase monitoring relay CM series, reliable and continuous monitoring of a three-phase network can be guaranteed, trouble-free and economical operation of machines and systems. Therefore, the three-phase monitoring relays of the CM series monitor the phase voltages, the phase sequence, the phase asymmetry, the presence of all phases and the neutral conductor as required.

Protector AF09 to AF96 from 4 to 45 kw AC-3 (400 W) stand for the compact series with AC/DC control and very wide coil voltage ranges. Only 4 coils cover control voltages from 20...500 WDC to 24...500 VAC - without additional required extinguishing elements. They can therefore be used worldwide and only in low variance. They switch power circuits with motors, slightly inductive or non-inductive loads. Flexible exchangeable coil connection terminals allow the connection from above, from below or from above and below. Attachable accessories are 1- and 4-pole auxiliary switches that can be plugged on the front side and 2-pole auxiliary switches that can be mounted on the right and left side. A further auxiliary switch block with 1S+1Ö and coil connections A1 and A2 is available until AF65. All auxiliary contacts are designed as mirror contacts according to IEC60947-5-1 Annex L. Other accessories such as timepieces, wiring aids and locking members, among others, complement the range.

Defective arc protection (AFDD) with FI/LS switch (RCBO) according to IEC/EN 62606 (WDE 0665-10) and IEC/EN 61009-1 (WDE 0664-20), IEC/EN 61009-2-1 (WDE 0664-21) provide protection against serial and parallel fault arcs, protection against overcurrent (overload or short circuit), protection against sinusoidal alternating currents; Protection against overvoltage (internal only for AFDD) and protection against electrically ignited fires according to DIN WDE 0100-420. Mandatory areas of application according to DIN WDE 0100-420 are in single-phase AC voltage systems with In = 16 A in sleeping or living spaces of homes and day facilities for children, disabled or old people or barrier-free homes, as well as in rooms or places with fire risk (with special fire risk, fire hazards of plants), predominantly/mainly from combustible building materials (classification of the combustability of building materials). It is recommended to use Afds in rooms with sleeping facilities, rooms or places with a fire-promoting structure and high connection power terminal circuits. In general, the AFDD is also recommended to increase fire protection against electrically ignited fires. LED indicator to identify the cause of triggering. Feeding from above or below as desired, transverse wiring, for example to FI protection switches in the rear terminal area, is possible. Accessory of the system per M compact®. IEC/EN 61009 Icn=6kA. AFDD+RCBO DS-ARC1 is 1polig protected (LS), switching 2polig.

The magnetic safety transformer Si-TR400-230/12Lv for the operation of low-voltage halogen lamps 12W, up to 400 Watt, protective lens II, is protected insulated, 230V/11,5V 50/60Hz, in compact and casting resin-reinforced design, 100x128x165mm (Hxbxl), dimmable over phase section, with thermal protection and primary protection

Protector AF09 to AF96 from 4 to 45 kw AC-3 (400 W) stand for the compact series with AC/DC control and very wide coil voltage ranges. Only 4 coils cover control voltages from 20...500 WDC to 24...500 VAC - without additional required extinguishing elements. They can therefore be used worldwide and only in low variance. They switch power circuits with motors, slightly inductive or non-inductive loads. Flexible exchangeable coil connection terminals allow the connection from above, from below or from above and below. Attachable accessories are 1- and 4-pole auxiliary switches that can be plugged on the front side and 2-pole auxiliary switches that can be mounted on the right and left side. A further auxiliary switch block with 1S+1Ö and coil connections A1 and A2 is available until AF65. All auxiliary contacts are designed as mirror contacts according to IEC60947-5-1 Annex L. Other accessories such as timepieces, wiring aids and locking members, among others, complement the range.