List of products by brand ABB

The time relays of the CT-D series in MDRC are located in a housing that is only 17.5 mm wide and fits into all common installation and distribution cabinets. The CT-D series is the link between industrial and installation design. 10 single and 2 multifunction devices with 7 time functions are available for maximum flexibility in use. The devices have 4 or. 7 time ranges that can be adjusted from 0.05 seconds to 100 hours. Their wide-voltage input allows a worldwide use.

The time relays of the CT-D series in MDRC are located in a housing that is only 17.5 mm wide and fits into all common installation and distribution cabinets. The CT-D series is the link between industrial and installation design. 10 single and 2 multifunction devices with 7 time functions are available for maximum flexibility in use. The devices have 4 or. 7 time ranges that can be adjusted from 0.05 seconds to 100 hours. Their wide-voltage input allows a worldwide use.

EF19 are self-serviced electronic overload relays that do not require additional external power supply. In an overload event or in a phase failure, they reliably protect motors. They are easy to use like thermal overload relays and compatible with standard motor applications. Thanks to their wide range of adjustments, their high accuracy, high operating temperature range and the ability to select from 3 trigger classes (10E, 20E, 30E). The overload relays are connected directly to the contactor. Individual setup sets are available as accessories. Manual or automatic resetting selectable, phase failure sensitivity according to IEC/EN 60947-4-1, temperature compensation, TEST and STOP function, trigger display integrated on the front, trigger and signal contact (1 closer/1 opener).

Motor protection switch MS116 with thermal and electromagnetic protection stands for the compact and economical series for engine protection up to 15 kw (400 W) with a module width of 45 mm. The temperature-compensated device has a rotary handle operation with a clear switching position indicator I/0. The rotary handle can be locked in the 0 position by means of a closing device. Auxiliary and signal contacts as well as undervoltage and working current triggers can be installed without tools. 3-phase rails for 65 A or for 100 A and feed-in blocks for 25 mm2 or 35 mm2 permit the joint feeding of several motor protection switches. Protective housing as well as accessories for control cabinet and door mounting supplement the range.

The universal interface has 2 channels. These can be parameterized with the aid of the ETS as input or output. Conventional probes, auxiliary contacts, light-emitting diodes and the electronic relay ER/U 1.1 can be connected to the connection lines. These can be extended up to 10 m. The contact interrogation voltage and the supply voltage for the Leds are provided by the device, the resistors for the Leds are integrated.

The EasyLine series ABB has a robust, uniform design that is user-friendly. Thanks to this modern design, the series switches rated currents from 100 A - 630 A at voltages from 220 V to 690 V with ease. In addition, a high level of safety is ensured with the protection class IP30 from the front in the closed position and the protection class IP20 in the open position. ABB offers you the series in 1-, 2-, 3- and 4-pole variants including a wide range of cable clamps and snap accessories. In addition, the devices are tested according to EN / IEC 60947-3.

Motor safety switch MS132...K in screwless push-in spring connection technology with thermal and electromagnetic protection stands for the compact and powerful series with high short-circuit switch-off capability for engine protection up to 15 kw (400 W) with a module width of 45 mm. The temperature-compensated device has a rotary handle operation with a clear switching position indicator I/TRIP/0. In addition, MS132...K has a short-circuit display. The rotary handle can be locked directly in the 0 position by means of a padlock. Auxiliary, signal and short-circuit alarm contacts as well as undervoltage and working current triggers can be installed without tools. Push-in spring variants are available for auxiliary and signal contacts, these also fit the motor protection switches in screw technology. Direct adapters to protectors of the AF...K series allow the simple construction of compact starter combinations. Protective housing as well as accessories for control cabinet and door mounting supplement the range. The push-in spring connection clamps permit toolless and time-saving insertion of the connection lines for rigid wires and strands with wire end sleeves, without cords can also be connected; a subsequent readjustment of the connections is eliminated.

Motor protection switch MS116 with thermal and electromagnetic protection stands for the compact and economical series for engine protection up to 15 kw (400 W) with a module width of 45 mm. The temperature-compensated device has a rotary handle operation with a clear switching position indicator I/0. The rotary handle can be locked in the 0 position by means of a closing device. Auxiliary and signal contacts as well as undervoltage and working current triggers can be installed without tools. 3-phase rails for 65 A or for 100 A and feed-in blocks for 25 mm2 or 35 mm2 permit the joint feeding of several motor protection switches. Protective housing as well as accessories for control cabinet and door mounting supplement the range.

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN WDE 0100-430 and DIN WDE 0100-530. They meet the construction requirements DIN WDE 0641-11 and IEC/EN 60898-1, DIN WDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

EF19 are self-serviced electronic overload relays that do not require additional external power supply. In an overload event or in a phase failure, they reliably protect motors. They are easy to use like thermal overload relays and compatible with standard motor applications. Thanks to their wide range of adjustments, their high accuracy, high operating temperature range and the ability to select from 3 trigger classes (10E, 20E, 30E). The overload relays are connected directly to the contactor. Individual setup sets are available as accessories. Manual or automatic resetting selectable, phase failure sensitivity according to IEC/EN 60947-4-1, temperature compensation, TEST and STOP function, trigger display integrated on the front, trigger and signal contact (1 closer/1 opener).

EF19 are self-serviced electronic overload relays that do not require additional external power supply. In an overload event or in a phase failure, they reliably protect motors. They are easy to use like thermal overload relays and compatible with standard motor applications. Thanks to their wide range of adjustments, their high accuracy, high operating temperature range and the ability to select from 3 trigger classes (10E, 20E, 30E). The overload relays are connected directly to the contactor. Individual setup sets are available as accessories. Manual or automatic resetting selectable, phase failure sensitivity according to IEC/EN 60947-4-1, temperature compensation, TEST and STOP function, trigger display integrated on the front, trigger and signal contact (1 closer/1 opener).

MS132 motor protection switch with thermal and electromagnetic protection stands for the compact and high-performance series with high short-circuit power for motor protection up to 15 kw (400 W) with a module width of 45 mm. The temperature-compensated device has a rotary handle operation with a clear switching position indicator I/TRIP/0. In addition, MS132 has a short-circuit display. The rotary handle can be locked directly in the 0 position by means of a padlock. Auxiliary, signal- and co-locking contacts as well as undervoltage and working current triggers can be installed without tools. 3-phase rails for 65 A or for 100 A and feed blocks for 25 mm2 or. 35 mm2 allow the common supply of several motor protection switches. Protective housing as well as accessories for control cabinet and door mounting supplement the range. Atex certification allows the protection of engines in the ex-field, UL approval as "Self protected combination motor cotroller" extends the field of use in North America.