List of products by brand ABB

Power surge switches are electromagnetically actuated devices with which a simple, energy-saving and safe lighting control can be realized. As a rule, a control of current surge switches via pulse probes is used where the light is to be operated from at least three different locations. Through each control pulse sent to the coil magnet system, the device switches back to the previous position and holds it mechanically up to the next control pulse. In the event of a voltage failure, it is ensured that the last switching position is held mechanically. This technology helps significantly reduce the electrical power loss and power consumption of the devices. Due to the very quiet switching noises, power surge switches are also suitable for use in public buildings, hotels, as well as in private living areas. Depending on the type, the devices can be controlled with common control voltages and are suitable for a rated current of 16 A or. 32 A.

Installation relays E297 are electromagnetically operated small contactors with a width of 18mm (1 module unit). With these installation relays a reliable consumer control can be designed. As a rule, the installation relays are used via a control switch (continuous contact) where, for example, an illumination, an air conditioning, a fan or the like is to be controlled. The device remains in the ON position as long as the control voltage is applied to the coil. If the control voltage is interrupted, the installation relay always falls back into the rest position (out-position). Thanks to the optimal switching power, they are also suitable for applications in industrial environments and in situations where it is necessary to ensure control over more powerful consumers (such as several lighting groups). The use of an optimized coil (low power loss =low operating temperature) ensures trouble-free and safe use in the electric distributor. The silent switching noises and the sponge-free magnet system also justify use in public buildings and in private households. Depending on the type, the installation relays can be controlled with common AC/DC control voltages and are designed for a rated current of 16 A.

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN WDE 0100-430 and DIN WDE 0100-530. They meet the construction requirements DIN WDE 0641-11 and IEC/EN 60898-1, DIN WDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN WDE 0100-430 and DIN WDE 0100-530. They meet the construction requirements DIN WDE 0641-11 and IEC/EN 60898-1, DIN WDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

These devices are specially designed for switching loads and reporting electrical conditions in a low-voltage switchgear. Depending on the contact layout, they are available as half or entire modules. Devices with light detectors have an LED that ensures optimal luminance with very low consumption. For example, such devices are used to switch displays or other electrical components (such as fans, air conditioning systems).

Power surge switches are electromagnetically actuated devices with which a simple, energy-saving and safe lighting control can be realized. As a rule, a control of current surge switches via pulse probes is used where the light is to be operated from at least three different locations. Through each control pulse sent to the coil magnet system, the device switches back to the previous position and holds it mechanically up to the next control pulse. In the event of a voltage failure, it is ensured that the last switching position is held mechanically. This technology helps significantly reduce the electrical power loss and power consumption of the devices. Due to the very quiet switching noises, power surge switches are also suitable for use in public buildings, hotels, as well as in private living areas. Depending on the type, the devices can be controlled with common control voltages and are suitable for a rated current of 16 A or. 32 A.

Installation relays E297 are electromagnetically operated small contactors with a width of 18mm (1 module unit). With these installation relays a reliable consumer control can be designed. As a rule, the installation relays are used via a control switch (continuous contact) where, for example, an illumination, an air conditioning, a fan or the like is to be controlled. The device remains in the ON position as long as the control voltage is applied to the coil. If the control voltage is interrupted, the installation relay always falls back into the rest position (out-position). Thanks to the optimal switching power, they are also suitable for applications in industrial environments and in situations where it is necessary to ensure control over more powerful consumers (such as several lighting groups). The use of an optimized coil (low power loss =low operating temperature) ensures trouble-free and safe use in the electric distributor. The silent switching noises and the sponge-free magnet system also justify use in public buildings and in private households. Depending on the type, the installation relays can be controlled with common AC/DC control voltages and are designed for a rated current of 16 A.

Protector AF09 to AF96 from 4 to 45 kw AC-3 (400 W) stand for the compact series with AC/DC control and very wide coil voltage ranges. Only 4 coils cover control voltages from 20...500 WDC to 24...500 VAC - without additional required extinguishing elements. They can therefore be used worldwide and only in low variance. They switch power circuits with motors, slightly inductive or non-inductive loads. Flexible exchangeable coil connection terminals allow the connection from above, from below or from above and below. Attachable accessories are 1- and 4-pole auxiliary switches that can be plugged on the front side and 2-pole auxiliary switches that can be mounted on the right and left side. A further auxiliary switch block with 1S+1Ö and coil connections A1 and A2 is available until AF65. All auxiliary contacts are designed as mirror contacts according to IEC60947-5-1 Annex L. Other accessories such as timepieces, wiring aids and locking members, among others, complement the range.

The 4-pole NF auxiliary contactors are used for switching auxiliary and control circuits (forced contacts available). They have an electronic coil interface which allows a large control voltage range and can cope with large control voltage fluctuations. NF auxiliary contactors have a built-in overvoltage protection and do not need any additional extinguishing elements.

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN WDE 0100-430 and DIN WDE 0100-530. They meet the construction requirements DIN WDE 0641-11 and IEC/EN 60898-1, DIN WDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

These devices are specially designed for switching loads and reporting electrical conditions in a low-voltage switchgear. Depending on the contact layout, they are available as half or entire modules. Devices with light detectors have an LED that ensures optimal luminance with very low consumption. For example, such devices are used to switch displays or other electrical components (such as fans, air conditioning systems).

Installation relays E297 are electromagnetically operated small contactors with a width of 18mm (1 module unit). With these installation relays a reliable consumer control can be designed. As a rule, the installation relays are used via a control switch (continuous contact) where, for example, an illumination, an air conditioning, a fan or the like is to be controlled. The device remains in the ON position as long as the control voltage is applied to the coil. If the control voltage is interrupted, the installation relay always falls back into the rest position (out-position). Thanks to the optimal switching power, they are also suitable for applications in industrial environments and in situations where it is necessary to ensure control over more powerful consumers (such as several lighting groups). The use of an optimized coil (low power loss =low operating temperature) ensures trouble-free and safe use in the electric distributor. The silent switching noises and the sponge-free magnet system also justify use in public buildings and in private households. Depending on the type, the installation relays can be controlled with common AC/DC control voltages and are designed for a rated current of 16 A.