List of products by brand ABB

ABB Phase rails enable secure and economical cross-wiring of automatic fuses, fault current protection devices and other modular installation devices. The following must be taken into account for a correct phase rail selection: terminal type (double terminal or cage terminal), number of terminals (1, 2, 3, 4, 1+N or 3+N), type of device (automatic, fault current protection devices or modular installation devices), combinations of the different types of device, use of automatic fuses with auxiliary switches mounted on the right and the bottom, phase rail connection cross-section (current loadability), number of modules (extractable phases)

The automatic fuses of the S 200 M series protect cables and cables from overload and short circuit according to DIN WDE 0100-430 and DIN WDE 0100-530. They meet the construction requirements DIN WDE 0641-11 and IEC/EN 60898-1, DIN WDE 0660-101 and IEC/EN60947-2 and UL1077 and CSA 22.2 No. 235. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 M fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN WDE 0100-430 and DIN WDE 0100-530. They meet the construction requirements DIN WDE 0641-11 and IEC/EN 60898-1, DIN WDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

Probes are always equipped with a closer and opener contact. The different colors of the buttons (6 colors) are based on the DIN60204-1 (color marking operating parts and their meaning). The probes are suitable for transmitting pulse control commands in almost any electrical system. It is also possible to use light groups by means of a pulse command, e.g. to a step switch, directly on site from the lower distributor or distributor cabinet.The module width is always 9 mm (0.5 TE).

These devices are specially designed for switching loads and reporting electrical conditions in a low-voltage switchgear. Depending on the contact layout, they are available as half or entire modules. Devices with light detectors have an LED that ensures optimal luminance with very low consumption. For example, such devices are used to switch displays or other electrical components (such as fans, air conditioning systems).

Installation relays E297 are electromagnetically operated small contactors with a width of 18mm (1 module unit). With these installation relays a reliable consumer control can be designed. As a rule, the installation relays are used via a control switch (continuous contact) where, for example, an illumination, an air conditioning, a fan or the like is to be controlled. The device remains in the ON position as long as the control voltage is applied to the coil. If the control voltage is interrupted, the installation relay always falls back into the rest position (out-position). Thanks to the optimal switching power, they are also suitable for applications in industrial environments and in situations where it is necessary to ensure control over more powerful consumers (such as several lighting groups). The use of an optimized coil (low power loss =low operating temperature) ensures trouble-free and safe use in the electric distributor. The silent switching noises and the sponge-free magnet system also justify use in public buildings and in private households. Depending on the type, the installation relays can be controlled with common AC/DC control voltages and are designed for a rated current of 16 A. The devices with control voltage of 24WDC are not suitable for control via PLC!

Signal contact/auxiliary switch for right-hand connection to circuit breakers, FI circuit breakers F200 to 100 A, FI/LS combinations DS200 (DDA200 + S200) and load disconnectors SD200. Function S2C-S/H6R: Displaying the switching position of the device contacts by auxiliary switch function or message when the circuit breaker has triggered an error. (overcurrent/short circuit for automatic fuses and FI/LS switches; Error current against ground for FI protection switches and FI/LS switches).

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN WDE 0100-430 and DIN WDE 0100-530. They meet the construction requirements DIN WDE 0641-11 and IEC/EN 60898-1, DIN WDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

2-pole contactor ESB20..N with 18 mm width control 1-phase loads up to 20 A and are available in different contact conditions and coil voltages. They switch electrical heaters, water heaters, pumps, ventilation and other drives as well as lighting. They operate both with AC and DC control voltages through an integrated coil circuit. The devices are therefore absolutely silent and silent when switching; they can be arranged next to each other without any distance. An auxiliary switch, which can be installed on the left side as an accessory, complements the range. ESB20..N have installation design and meet, among others, the EN61095 household standard, so they are particularly suitable for distribution installation.

The automatic safety devices of the S 200S series protect cables and cables from overload and short circuit according to DIN WDE 0100-430 and DIN WDE 0100-530. They meet the construction requirements DIN WDE 0641-11 and IEC/EN 60898-1. The output-side plug-in clamp allows toolless mounting of lines up to 4mm2. A voltage test can also be carried out with connected lines at the intended test point. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN WDE 0100-430 and DIN WDE 0100-530. They meet the construction requirements DIN WDE 0641-11 and IEC/EN 60898-1, DIN WDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

2-pole contactor ESB20..N with 18 mm width control 1-phase loads up to 20 A and are available in different contact conditions and coil voltages. They switch electrical heaters, water heaters, pumps, ventilation and other drives as well as lighting. They operate both with AC and DC control voltages through an integrated coil circuit. The devices are therefore absolutely silent and silent when switching; they can be arranged next to each other without any distance. An auxiliary switch, which can be installed on the left side as an accessory, complements the range. ESB20..N have installation design and meet, among others, the EN61095 household standard, so they are particularly suitable for distribution installation.