List of products by brand Hager

25mm2-95mm2 busbar clamp 12x5mm / 25mm2-70mm2 12x10mm,Cu conductor

busbar clamp 16mm2-120mm2, for busbars 12-40x5mm, for Cu conductor

Phase rail 3 polig with pin connection 10mm2 63A 39 Modules

Switch with LED indicator lamp according to EN 60669-1/669-2-4 with VDE characters, IP2x touch protection after BGV A3. Suitable for retrofit installation of additional equipment; Labeling option directly on the device. Rated current: 16 ANumber of poles: 1 PNumber of modules: 1AC voltage: 230 VInsulation voltage: 440 VImpact strength: 4000 VFrequency: 50/60 HzConnection type: screw technologyTotal loss power at rated current: 0.4 WMachine life mechanical switching games: 200000Connection cross section for flexible conductor: 1.5 - 10mm2Connection cross section for rigid conductor: 1.5 - 16mm2Operating temperature: -20 to 50 °CStorage temperature: -40 to 80 °CHeight installed product: 83 mmWide installed product: 17.5 mmDeep installed product: 68 mm

Performance: 8 VAOutput voltage: 8/12 VNumber of modules: 2AC voltage: 230 VInsulation voltage: 4000 VFrequency: 50 HzTotal power loss under rated current: 2.2 WConnection cross section for flexible conductor: 4mm2Connection cross section for rigid conductor: 6mm2Operating temperature: -20 to 35 °CHeight installed product: 111 mmWide installed product: 35 mmDeep installed product: 65 mm

Schuko socket, 3x rotatable, for Volta, for underput mounting, 650° socket 3x underput to 650°, protective contact socket with increased contact protection, prewired. Integrates in the cable entry slide with snap fastening. Mounted in all Volta sub-put housings in exchange of a slide. Three socket buttons are rotatable independently by 90°. Connection via WAGO connectors 1.5 - 2.5 mm2. A euro adapter is inserted for the protection class II (protection insulated). An overvoltage protection type 3 can be connected directly via parallel connection to the terminal. Height installed product:80 mmWide installed product:305 mmDeep Installed Product:45 mm

Frequency: 50/60 HzContact type: 1WContact Loading: AC1Max. bulb load: 450 WConnection type: screw technologyConnection cross-section with flexible conductor: 1 - 6mm2Connection cross section for rigid conductor: 1.5 - 10mm2Operating temperature: -20 to 50 °CStorage temperature: -40 to 70 °CNumber of modules: 1Protection type: IP40Assembly type: DIN rail (REG)

Energy meter MID three-phase, 2 tariff, direct measurement 100A three-phase energy meter for direct measurement of active energy up to 100A with high accuracy (class B). The counters are delivered calibrated at work, i.e. the calibration costs are included. Possibility to recalibrate after 8 years, a plombier set is included. Suitable for use in all network systems and equipped with additional 2 tariff counting. They are equipped with an illuminated digital display that allows the display of energy consumption and power in a resolution of 7 digits including a descending point. A total counter is integrated. The consumption (counter value) can be transmitted remotely by a pulse output. Wiring errors and connection errors are displayed and the measurement data are stored periodically. Connection: Direct connection Operating current: 0.08/100 A Max. Current (I max) of the measuring circuit: 100 A Power consumption: 7.5 VA Number of modules: 7 Certified: yes Frequency: 50/60 Hz

Technical characteristics Performance16 ISOutput voltage8 / 12 VNumber of modules3Rated operating voltage Ue230 VInsulation voltage4,000 VFrequency50 HzTotal loss power at rated current1.8 WConnection cross section with flexible conductor4mm2Connection cross section for rigid conductor6mm2Operating temperature-20 to 35 °CHeight installed product111 mmWide installed product54 mmDeep Installed Product65 mm

Height installed product110 mmWide installed product130 mmDeep Installed Product37 mm

fault current circuit breaker according to DIN VDE 0664-20 / EN61009-1 with QuickConnect terminal according to DIN EN 60898-1, VDE 0641-11, at the output up to 20 A and at the access up to 63 A. Simple individual removal from the phase rail composite. With VDE characters. Suitable for subsequent installation of additional equipment. Labeling option directly on the device. Nominal current: 6 A Trigger characteristic: B Nominal shutdown capability: 6 kA Type of differential protection: A Sensitivity: 30 mA Number of poles: 2 P Number of modules: 2 Rated operating voltage Ue: 240 V Rated current6ATrigger characteristicBRated value6Type of differential protectionASensitivity30 mANumber2 PNumber of modules2Rated operating voltage Ue240 VInsulation voltage500 VImpact strength4,000 VFrequency50 HzTorque2.1NmTotal loss power at rated current1.9 WDevice life, electrical switching games2000Machine life mechanical switching games2000Connection cross section with flexible conductor1 - 16mm2Connection cross section for rigid conductor1 - 25mm2Operating temperature-25 to 40 °CStorage temperature-25 to 70 °CHeight installed product94 mmWide installed product35 mmDeep Installed Product68 mm

fault current protection switches 4 polig 6kA 25A 300mA type A. fault current protection switches (FI) according to EN 61008-1, DIN EN 61008-2-1, VDE 0664 part 10 + 11, contact protection IP2x according to DIN VDE 0106 part 100. Suitable for subsequent mounting of additional devices (mount without tool). Connection terminals with wire insertion protection, Bi-Connect terminals at the bottom, external blue test button. All products with VDE characters. Labeling option directly on the device.Rated current25 AType of differential protectionASensitivity300 mANumber4 PImpact current resistance (pulse fault currents 8/20μs)0,25Number of modules4Frequency50 HzAssembly typeDIN railConnection typeScrew technologyConnection cross section with flexible conductor16mm2Connection cross section for rigid conductor25mm2Torque2.8 NmType of protectionIP20Insulation voltage500 VImpact strength4 kVAdditional equipment possible1Operating temperature-25 to 40 °CMachine life mechanical switching games4000Device life, electrical switching games2000Total loss power at rated current2.6 WDegree of contamination according to IEC 60664 / IEC 60947-22Height above N.N.2000 mRated current at 20° C25 ARated current at 30° C25 ARated current at 35° C25 ARated current at 40° C25 ARated current at 45° C25 ARated current at 50°C25 ARated current at 55° C25 ARated current at 60°C25 ARated current at 65°C22 ARated current at 70°C18 AStorage temperature-55 to 70 °CHeight installed product83 mmWide installed product70 mmDeep Installed Product70 mm