List of products by brand Hager

IP55Nennial voltage: 250 V ACSwitching current: 10 AXOperating temperature: -40/60 °Cwith full-surface seal on the rear side of the housing for rear line introduction and cleaning compensation with 2 snap-in places for Wago 2-wire connection clamps in housing bottom with Wago 2-wire connection terminal with an introduction for 2 lines and an introduction for pipe or pipe with connectors ZAMAK quick release pins.
AP

Cross switch AP Berker W.1 grey/light grey matt
with cable entry for 2 cables and cable entry for cable or pipe
AP

IP55Rated voltage: 250 V ACRated current: 16 AOperating temperature: -40/60 °CConnection terminals: according to VDE 0620-1with full-surface seal on the rear side of the housing for rear line introduction and cleaning compensation with falling flap cover, manually lockable with 2 snap-in places for Wago 2-wire connection clamps in housing bottom with Wago 2-wire connection terminal with an introduction for 2 lines and an introduction for pipe or pipe with connectors Stainless steel hinged cover springs, pins of the ZAMAK quick release. grey/light grey matt
AP

Nennspannung: 250 V ACNennstrom: 16 ABetriebstemperatur: -40/60 °CVerbindungsklemmen: nach VDE 0620-1mit vollflächiger Dichtung an der Gehäuserückseite für rückseitige Leitungseinführung und Putzausgleich mit zufallendem Klappdeckel, manuell einrastbar mit 2 Einrastplätzen für Wago 2-Leiter Verbindungsklemmen im Gehäuseboden mit Wago 2-Leiter Verbindungsklemme für Verdrahtung für senkrechte Montage mit einer Einführung für 2 Leitungen und einer Einführung für Leitung oder Rohr Einsätze durchverdrahtet mit Steckklemmen Klappdeckelfedern aus Edelstahl Rostfrei, Stifte des Schnellverschlusses aus ZAMAK. grau/lichtgrau matt
AP

IP55Nennial voltage: 250 V ACRated current: 16 AOperating temperature: -40/60 °CConnection terminals: according to VDE 0620-1with full-surface seal on the rear side of the housing for rear line introduction and cleaning compensation with falling flap cover, manually lockable with 2 snap-in places for Wago 2-wire connection clamps in housing bottom with Wago 2-wire connection terminal for horizontal mounting 2 additional lateral line introductions with an introduction for 2 lines and an introduction for pipe or pipe Wired inserts with connectors Due to the lateral line introductions, particularly suitable for mounting via work benches. Stainless steel hinged cover springs, pins of the ZAMAK quick release. grey/light grey matt 4 line introductions
AP

1P+N 6kA B-Characteristic 16A 10mA type A QC fault current circuit breaker according to DIN VDE 0664-20 / EN61009-1 with QuickConnect terminal according to DIN EN 60898-1, VDE 0641-11, at the output up to 20 A and at the access up to 63 A. Simple individual removal from the phase rail composite. With VDE characters. Suitable for subsequent installation of additional equipment. Labeling option directly on the device. Nominal current: 16 A Trigger characteristic: B Nominal shutdown capability: 6 kA Type of differential protection: A Sensitivity: 10 mA Number of poles: 2 P Number of modules: 2 Rated operating voltage Ue: 240 V



Rated current
16 A


Trigger characteristic
B


Rated value
6


Type of differential protection
A


Sensitivity
10 mA


Number
2 P


Number of modules
2


Rated operating voltage Ue
240 V


Insulation voltage
500 V


Impact strength
4,000 V


Frequency
50 Hz


Torque
2.1Nm


Device life, electrical switching games
2000


Machine life mechanical switching games
2000


Connection cross section with flexible conductor
1 - 16mm2


Connection cross section for rigid conductor
1 - 25mm2


Operating temperature
-25 to 40 °C


Storage temperature
-25 to 70 °C


Height installed product
94 mm


Wide installed product
35 mm


Deep Installed Product
68 mm

1P+N 10kA B-13A 30mA type A fault current circuit breaker according to EN 61009-1 and EN 61009-2-1. IP2x contact protection according to DIN VDE 0660 part 514. Suitable for subsequent mounting of additional devices (mount without tool). Connection terminals with wire insertion protection, Bi-Connect terminals below, external blue test button for half-yearly actuation and fault current display. Easy removal from the phase rail composite. All products with VDE characters. Labeling option directly on the device. Rated current: 13 A Trigger characteristic: B Switching capacity Icn AC according to IEC 60898-1: 10 kA Type of fault current protection: A Rated fault current: 30 mA Number of poles: 2 P Number of modules: 2 Rated operating voltage Ue: 240 V

1P+N 10kA B-16A 30mA Type A fault current circuit breaker according to EN 61009-1 and EN 61009-2-1. IP2x contact protection according to DIN VDE 0660 part 514. Suitable for subsequent mounting of additional devices (mount without tool). Connection terminals with wire insertion protection, Bi-Connect terminals below, external blue test button for half-yearly actuation and fault current display. Easy removal from the phase rail composite. All products with VDE characters. Labeling option directly on the device. Rated current: 16 A Trigger characteristic: B Switching capacity Icn AC according to IEC 60898-1: 10 kA Type of fault current protection: A Rated fault current: 30 mA Number of poles: 2 P Number of modules: 2 Rated operating voltage Ue: 240 V

1P+N 10kA C-13A 30mA type A fault current circuit breaker according to EN 61009-1 and EN 61009-2-1. IP2x contact protection according to DIN VDE 0660 part 514. Suitable for subsequent mounting of additional devices (mount without tool). Connection terminals with wire insertion protection, Bi-Connect terminals below, external blue test button for half-yearly actuation and fault current display. Easy removal from the phase rail composite. All products with VDE characters. Labeling option directly on the device. Rated current: 13 A Trigger characteristic: C Switching capacity Icn AC according to IEC 60898-1: 10 kA Type of fault current protection: A Rated fault current: 30 mA Number of poles: 2 P Number of modules: 2 Rated operating voltage Ue: 240 V

1P+N 10kA C-16A 30mA Type A fault current circuit breaker according to DIN VDE 0664 Part 20 / EN61009-1 and DIN VDE 0664 Part 21 / EN61009-2-1. Contact protection according to DIN VDE 0660 part 514. Bi-Connect terminals below, blue test button and fault current display. Easy removal from the phase rail composite. With VDE characters. Suitable for subsequent installation of additional equipment. Labeling option directly on the device. Rated current: 16 A Trigger characteristic: C Switching capacity Icn AC according to IEC 60898-1: 10 kA Type of fault current protection: A Rated fault current: 30 mA Number of poles: 2 P Number of modules: 2 Rated operating voltage Ue: 240 V

1P+N 10kA B- 13A 30mA type A-G fault current circuit breaker according to EN 61009-1 and EN 61009-2-1, short-term delayed according to ÖVE E 8601. IP2x contact protection according to DIN VDE 0660 part 514. Suitable for subsequent mounting of additional devices (mount without tool). Connection terminals with wire insertion protection, Bi-Connect terminals below, external blue test button for half-yearly actuation and fault current display. Easy removal from the phase rail composite. All products with ÖVE characters. Labeling option directly on the device. Nominal current: 13 A Trigger characteristic: B Switching capacity Icn AC according to IEC 60898-1: 10 kA type of fault current protection: A G Rated fault current: 30 mA Number of poles: 2 P Number of modules: 2 Rated operating voltage Ue: 230 V