List of products by brand Eaton

Trigger characteristicCNumber of poles (total)2Number of secured poles2Rated currentA6Measurement voltageV230Measurement switching capacity Icn according to EN 60898 at 230 VKA10Measurement switching capacity Icn according to EN 60898 at 400 VKA10Measurement switching capacity Icu according to IEC 60947-2 at 230 VKA0Measurement switching capacity Icu according to IEC 60947-2 at 400 VKA0Type of voltageACEnergy limiting class3FrequencyHZ50 to 60Interconnecting neutral conductoryesSuitable for underground installationnoOvervoltage category3Pollution2Width in division units1.5Installation depthmmANNEXAdditional equipment possibleyesType of protection (IP)IP20

Clamp rail (63A) made of brass, when used as a PE rail, direct assembly in the distributor, as an N conductor rail, the assembly is carried out by means of clamp carriers KT-3/KT-5

Switching functionSwitchNumber of locks0Number of openers0Number of changers0Number1Rated currentA40Measurement voltageV400Min. Measurement voltageV230Measuring capacityKA0Short-circuit strength (Icw)KA3Type of voltageACForce separation (according to DIN VDE 0113)noWith signal lampnoColor of the calottenot applicableLampsnot applicableLampsnot applicableMax. lamp powerW0Width in division units1Installation depthmm60Type of protection (IP)IP40

Spare parts KLV of the second generation, protection class II, plastic capsule with steel door, front cover plombable and laser labeled according to IEC/EN 60670-24, plus 2 division units reserve per row, marking slots in the wall box, flat door frame design, stable door lock optional. Standards: In accordance with IEC/EN 60670-24, DIN 43871, IEC/EN 62208 and thus released for distributions according to IEC/EN 61439-3.




Basic function

 
 
Basic device



Product function

 
 
Installation distributor



Product range

 
 
KLV Small distributor



Construction

 
 
Other



Place of destination

 
 
Indoor swimming pool



Installation type

 
 
Other



Door/folder

 
 
White



Type of protection

 
 
IP30



Colour

 
 
White



Components

 
 
Support rail frame



Contact protection cover

 
 
Plastic



Series

Number
 
3



Units of division per row

 
 
12



Description

 
 
IP30Protection class IIPlastic housing with steel plate door white (RAL 9016)



Cable inserts

 
 
Cable inlets at the top and bottom, side wall, rear wall



PE and N Terminals

 
 
Plug clamps



PE and N clamps

Number x cross section
mm2
PE: 4 x (2.5 - 25) + 28 x (0.5 - 4)N: 4 x (2.5 - 25) + 28 x (0.5 - 4)



Scope

 
 
WalletDoor/frameApparatusFront coverZero and protective conductor terminals with KSK plug-in clamping technologyLibelle to align3D plaster balance with up to 18mm depth compensationCable holderNail flapsAssembly instructionsLabel sheet





Technical data




General



Standards and regulations

 
 
IEC 62208, IEC 60670-24



Raw (according to EC Directive 2002/95/EC of the European Parliament and of the Council)

 
 
compliant



Temperature

 
C
-5 - +40



Type of protection

 
 
IP30



Protection class

 
 
Protection class II (total insulated)



Rated operating voltage

U
BY AC
400



Measurement frequency

f
HZ
50


Material



Material

 
 
Polystyrene (plastic)Steel sheet, powder-coated



Colour

 
 
white (RAL 9016)


Material properties



mechanical

 
 
 



Shock resistance

 
 
I05








IEC/EN 61439(Show map)



Technical data according to ETIM 6.0



Electrical distributor systems (including installation distributors) (EG000023) / Installation small distributor (EC000214)


Electrical, Automation and Process Control / Electrical Installation System, Electrical / Electrical Distribution System (Incl. Installation Distributor) / Installation Small Distributor (ecl@ss8.1-27-14-24-09) [ACN387008])



Assembly type

 
 
Other



Number of rows

 
 
3



Width in division units

 
 
12



Type of cover

 
 
Door



Exhaust

 
 
with neckline



Transparent lid/door

 
 
no



Material of the housing

 
 
Plastic



Height

 
mm
590



Width

 
mm
360



Depth

 
mm
100



Installation depth

 
mm
88



Internal depth

 
mm
75



DIN rail

 
 
yes



With mounting plate

 
 
no



Accessibility

 
 
yes



EMC version

 
 
yes



Colour

 
 
white



RAL number

 
 
9016



Type of protection (IP)

 
 
IP30



With lock

 
 
no

High-quality FI/LS combination switch, power-voltage-independent triggering, line-up compatible, contact position indicator red - green, clamping aid - rear plug protection, extensive accessory program can be retrofitted, large selection of dimension fault currents, free choice of the line-up arrangement at the top and bottom, dimensioning currents up to 40 A, tripping characteristics B, C, dimensioning switching capacity 10 kA, suitable for use in the outdoors (free)

The strip distributors allow for the installation of 45mm row mounting devices. They consist of the two flame-retardant plastic profile strips (terminal cover strips) KLV-LV-PL and the two side plates KLV-LV-SP with inserted retaining plates. Plastic Color: RAL 7035 side panels, RAL 7040 profile strip. Mounting takes place on the hat rail according to IEC/EN 60715.

High-quality FI/LS combination switch, power-voltage-independent triggering, line-up compatible, contact position indicator red - green, clamping aid - rear plug protection, extensive accessory program can be retrofitted, large selection of dimension fault currents, free choice of the line-up arrangement at the top and bottom, dimensioning currents up to 40 A, tripping characteristics B, C, dimensioning switching capacity 10 kA, suitable for use in the outdoors (free)

Schuko socket, version according to VDE, ÖVE, Modular displaceable L/N, screw fastening possible, width 2.5TE, railing block Z7-SD/1P+N 10 mm2

Spare parts KLV of the second generation, protection class II, plastic capsule with steel door, front cover plombable and laser labeled according to IEC/EN 60670-24, plus 2 division units reserve per row, marking slots in the wall box, flat door frame design, stable door lock optional. Standards: In accordance with IEC/EN 60670-24, DIN 43871, IEC/EN 62208 and thus released for distributions according to IEC/EN 61439-3.




Basic function

 
 
Basic device



Product function

 
 
Installation distributor



Product range

 
 
KLV Small distributor



Construction

 
 
Other



Place of destination

 
 
Indoor swimming pool



Installation type

 
 
Other



Door/folder

 
 
White



Type of protection

 
 
IP30



Colour

 
 
White



Components

 
 
Support rail frame



Contact protection cover

 
 
Plastic



Series

Number
 
4



Units of division per row

 
 
12



Description

 
 
IP30Protection class IIPlastic housing with steel plate door white (RAL 9016)



Cable inserts

 
 
Cable inlets at the top and bottom, side wall, rear wall



PE and N Terminals

 
 
Plug clamps



PE and N clamps

Number x cross section
mm2
PE: 4 x (2.5 - 25) + 28 x (0.5 - 4)N: 4 x (2.5 - 25) + 28 x (0.5 - 4)



Scope

 
 
WalletDoor/frameApparatusFront coverZero and protective conductor terminals with KSK plug-in clamping technologyLibelle to align3D plaster balance with up to 18mm depth compensationCable holderNail flapsAssembly instructionsLabel sheet





Technical data




General



Standards and regulations

 
 
IEC 62208, IEC 60670-24



Raw (according to EC Directive 2002/95/EC of the European Parliament and of the Council)

 
 
compliant



Temperature

 
C
-5 - +40



Type of protection

 
 
IP30



Protection class

 
 
Protection class II (total insulated)



Rated operating voltage

U
BY AC
400



Measurement frequency

f
HZ
50


Material



Material

 
 
Polystyrene (plastic)Steel sheet, powder-coated



Colour

 
 
white (RAL 9016)


Material properties



mechanical

 
 
 



Shock resistance

 
 
I05








IEC/EN 61439(Show map)



Technical data according to ETIM 6.0



Electrical distributor systems (including installation distributors) (EG000023) / Installation small distributor (EC000214)


Electrical, Automation and Process Control / Electrical Installation System, Electrical / Electrical Distribution System (Incl. Installation Distributor) / Installation Small Distributor (ecl@ss8.1-27-14-24-09) [ACN387008])



Assembly type

 
 
Other



Number of rows

 
 
4



Width in division units

 
 
12



Type of cover

 
 
Door



Exhaust

 
 
with neckline



Transparent lid/door

 
 
no



Material of the housing

 
 
Plastic



Height

 
mm
715



Width

 
mm
360



Depth

 
mm
100



Installation depth

 
mm
88



Internal depth

 
mm
75



DIN rail

 
 
yes



With mounting plate

 
 
no



Accessibility

 
 
yes



EMC version

 
 
yes



Colour

 
 
white



RAL number

 
 
9016



Type of protection (IP)

 
 
IP30



With lock

 
 
no

Auslösecharakteristik

 
 
C



Polzahl (gesamt)

 
 
3



Anzahl der abgesicherten Pole

 
 
3



Bemessungsstrom

 
A
20



Bemessungsspannung

 
V
400



Bemessungsschaltvermögen Icn nach EN 60898 bei 230 V

 
kA
10



Bemessungsschaltvermögen Icn nach EN 60898 bei 400 V

 
kA
10



Bemessungsschaltvermögen Icu nach IEC 60947-2 bei 230 V

 
kA
0



Bemessungsschaltvermögen Icu nach IEC 60947-2 bei 400 V

 
kA
0



Spannungsart

 
 
AC



Energiebegrenzungsklasse

 
 
3



Frequenz

 
Hz
50 - 60



Mitschaltender Neutralleiter

 
 
nein



Geeignet für Unterputz-Installation

 
 
nein



Überspannungskategorie

 
 
3



Verschmutzungsgrad

 
 
2



Breite in Teilungseinheiten

 
 
3



Einbautiefe

 
mm
70.5



Zusatzeinrichtungen möglich

 
 
ja



Schutzart (IP)

 
 
IP20

The strip distributors allow for the installation of 45mm row mounting devices. They consist of the two flame-retardant plastic profile strips (terminal cover strips) KLV-LV-PL and the two side plates KLV-LV-SP with inserted retaining plates. Plastic Color: RAL 7035 side panels, RAL 7040 profile strip. Mounting takes place on the hat rail according to IEC/EN 60715.

FI/LS combination switch 1+N-pole, measuring current 13A, measurement error current 30mA, TriggerChar B, IEC/EN 61009: 10kA, conditional shock resistant 250 A, Type AC, cap size 45mm, Installation width 2 TE (35mm), hat rail mounting, Clamp cross section 1-25 mm2