List of products by brand Eltako

If a plurality of installation relays are permanently excited, ensure sufficient ventilation according to the power loss calculation. The spacer increases a distance from the neighboring device of 9 mm. Distance piece for the production and maintenance of a ventilation distance in the case of very warm series installation devices, e.g. dimmers from 300W/400W and continuous electromechanical current surge switches. Width: 9 mm Depth: 55 mm Height: 80 mm

Switching relay for mounting on support rails DIN-EN 60715 TH35 rated switching power 16 A/250 W AC or. 10 A/400 W AC Electromechanical switching relay with manual actuation and switching position display. Switch-on time 100%. Control power requirement 1.9W. Contact distance 3mm. Test voltage Contact/contact 2000W and test voltage control connections/contact 4000W. Number of contacts as closer: 1 Voltage type for actuation: AC TLE: 1 Rated control voltage Us at AC 50 Hz: 12 - W

Electronic AC meter for mounting on support rail DIN-EN 60715 TH35, maximum current 32A, stand-by-loss only 0.4 Watt, accuracy class B (1)%, with S0 interface TLE: 1 current A: 5(65) Certified: Yes

Tip-Funk button actuators UP-Funk button actuator with rocker and frame. For single mounting 80x80x15/33mm
or assembly into the 55s switch system. Pure white glossy
power surge switches with a lock, not potential-free,
230V bulbs and halogen lamps 1000W, ESL and 230V LED lamps up to
200W.

Switching relay for mounting on support rails DIN-EN 60715 TH35 rated switching power 16 A/250 W AC or. 10 A/400 W AC Electromechanical switching relay with manual actuation and switching position display. Switch-on time 100%. Control power requirement 1.9W. Contact distance 3mm. Test voltage Contact/contact 2000W and test voltage control connections/contact 4000W. Number of contacts as closer: 1 Voltage type for actuation: AC TLE: 1 Rated control voltage Us at AC 50 Hz: 24 - W

Switching relays for mounting on support rails DIN-EN 60715 TH35 Rated switching power 16 A/250 W AC or 10 A/400 W AC Number of contacts as closer: 1 TLE: 1 Rated control voltage Us at AC 50 Hz: 8 - W Voltage type for actuation: AC Electromechanical switching relay with manual actuation and switching position display. Switch-on time 100%. Control power requirement 1.9W. Contact distance 3mm. Test voltage Contact/contact 2000W and test voltage control connections/contact 4000W.

Current surge switches for mounting on support rails DIN-EN 60715 TH35 rated switching power 16 A / 250 W AC or. 10 A / 400 W AC with manual actuation and switching position display mechanical storage of the switching position Electromechanical current surge switch with manual actuation and switching position display. Switch-on time 100%. 5-6W. Contact distance 3mm. Distance control connections/contact > 6mm. Suitable for connection to an SELV network. Number of locks: 1 width in division units: 1 dimensioning switching current: 16 A control voltage 1: 8 - W control voltage type 1: AC installation depth: 55 mm assembly type: DIN rail frequency of control voltage 1: 50 - 50 Hz voltage type of supply voltage: AC supply voltage range: 250 - 250 W Max. Bulb load: 2300 W Max. Lamp load: 2300 VA Max. Fluorescent lamp load (Duo circuit): 2300 VA Max. Fluorescent lamp load (parallel compensated): 500 VA Max. Switching current (cos phi = 0.6): 10 A manual operation possible: Yes

Current surge switches for mounting on support rails DIN-EN 60715 TH35 rated switching power 16 A / 250 W AC or. 10 A / 400 W AC with manual actuation and switching position display mechanical storage of the switching position Electromechanical current surge switch with manual actuation and switching position display. Switch-on time 100%. 5-6W. Contact distance 3mm. Distance control connections/contact > 6mm. Suitable for connection to an SELV network. Number of locks: 1 width in division units: 1 dimensioning switching current: 16 A control voltage 1: 24 - W control voltage type 1: AC installation depth: 55 mm assembly type: DIN rail frequency of control voltage 1: 50 - 50 Hz voltage type of supply voltage: AC supply voltage range: 250 - 250 W Max. Bulb load: 2300 W Max. Lamp load: 2300 VA Max. Fluorescent lamp load (Duo circuit): 2300 VA Max. Fluorescent lamp load (parallel compensated): 500 VA Max. Switching current (cos phi = 0.6): 10 A manual operation possible: Yes

Tip-Funk button actuators UP-Funk button actuator with rocker and frame. 84x84x16mm
or assembly into the e-design switch system. Pure white glossy
power surge switches with a lock, not potential-free,
230V bulbs and halogen lamps 1000W, ESL and 230V LED lamps up to
200W.

Switching relays for can installation and AP mounting with manual actuation and switching position indicator Rated switching power 10 A/250 W AC or 6 A/400 VAC Number of contacts as closer: 1 Rated control voltage Us at AC 50 Hz: 230 - W Electromechanical switching relay with manual actuation and switching position indicator. Switch-on time 100%. 4-5W. Contact distance 2mm. Test voltage Contact/contact 2000W and test voltage control connections/contact 4000W.

Switching relays for can installation and AP mounting with manual actuation and switching position indicator Rated switching power 10 A/250 W AC or 6 A/400 VAC Number of contacts as closer: 1 Rated control voltage Us at AC 50 Hz: 12 - W Electromechanical switching relay 12W. 1 closer 10A/250V AC. For installation and AP mounting with manual actuation and switching position display. 50mm long, 26mm wide, 32mm deep. Switch-on time 100%. 4-5W. Contact distance 2mm. Test voltage Contact/contact 2000W and test voltage control connections/contact 4000W.

Power surge switches for can installation and AP mounting with manual actuation and switching position indicator Rated switch power 10 A/250 W AC or 6 A/400 VAC Dimensions: 26 x 50 x 32 mm Number of locks: 1 Rated switch current: 10 A Control voltage 1: 12 - W Mounting depth: 32 mm Mounting type: Power type of supply voltage: AC Supply voltage range: 250 - 250 W Max. Bulb load: 2300 W Max. Lamp load: 2300 VA Max. Fluorescent lamp load (Duo circuit): 2300 VA Max. Fluorescent lamp load (parallel compensated): 500 VA Max. Switching current (cos phi = 0.6): 10 A manual operation possible: Yes Electromechanical power surge switch with manual actuation and switching position display. Switch-on time 100%. 4-5W. Contact distance 2mm.

Tip-Funk button actuators UP-Funk button actuator with rocker and frame. For single mounting 80x80x15/33mm
or assembly into the 55s switch system. Pure white glossy
1+1 Locker 4A/250V AC for one
Shading element motor.
With integrated universal/direction sensor and connection for additional
conventional probes.

Power surge switches with manual actuation and switching position display. Only 1/2 division unit. 5W. For pulse control. Contact distance 3mm. Width in division units: 0.5 Number of changers: 0 Number of switches: 1 Number of openers: 0 Rated switching current: 16 A Control voltage 1: 12 - 12 W Control voltage type 1: AC Installation depth: 55 mm Function: other assembly type: DIN rail Frequency of control voltage 1: 50 - 50 Hz Voltage type of supply voltage: AC Supply voltage range: 250 - 250 W Max. Fluorescent lamp load (parallel compensated): 500 VA Max. Switching current (cos phi = 0.6): 8 A manual operation possible: Yes

Switching relays for mounting on support rails DIN-EN 60715 TH35 Rated switching power 16 A/250 W AC or 10 A/400 W AC Number of contacts as closer: 2 Voltage type for actuation: AC TLE: 1 Rated control voltage Us at AC 50 Hz: 230 - W Electromechanical switching relay with manual actuation and switching position display. Switch-on time 100%. Control power requirement 1.9W. Contact distance 3mm. Test voltage Contact/contact 2000W and test voltage control connections/contact 4000W.