List of products by brand Eltako

Eltako XS12-400-230V AC STROMSTOSS
Eltako XS12-400-230V AC STROMSTOSS
3-10 days
Current surge switches for support rails DIN EN 50022,Nenn Switching Power 25 A/250 W AC Number of locks: 4 Rated switch current: 25 A Control voltage 1: 230 - W Control voltage type 1: AC Mounting depth: 55 mm Installation type: DIN rail Frequency of control voltage 1: 50 - 50 Hz Voltage type of supply voltage: AC Supply voltage range: 250 - 250 W Max. Bulb load: 2300 W Max. Lamp load: 3600 VA Max. Fluorescent lamp load (Duo circuit): 3600 VA Max. Fluorescent lamp load (parallel compensated): 1000 VA Max. Switching current (cos phi = 0.6): 15 A manual operation possible: Yes Electromechanical current surge switch with manual actuation and switching position display. Only pulse control. 12-15W. Contact distance 3mm.
€47.65
Eltako XR12-220-230V AC INSTALLATION RELAY
Eltako XR12-220-230V AC INSTALLATION RELAY
3-10 days
Switching relays for day rails DIN EN 50022, rated switching power 25 A/250 W AC Installation contactor with manual actuation and switching position display. Switch-on time 100%. 4W. Contact distance 3mm. Test voltage Contact/contact 2000W and test voltage control connections/contact 4000W. Voltage type for actuation: AC Number of contacts as closer: 2 Number of contacts as opener: 2 Rated control voltage Us at AC 50 Hz: 230 - W
€48.09
Eltako XR12-200-230VAC INSTALLATION PROTECTION
Eltako XR12-200-230VAC INSTALLATION PROTECTION
3-10 days
Installation protector series installation device with manual actuation and switching position display. AC-types with rectifier, therefore free of bruise and reduced power loss. Rated switching power 25 A/250 W AC, voltage type of operating voltage: AC Number of switches: 2 Number of openers: 0 Protection type (IP): IP20 Number of division units: 1 Max. Bulb load: 2300 W Rated operating current: 25 A Rated operating voltage: 250 - 250 W Max. Fluorescent lamp load (parallel compensated): 1000 VA Max. Fluorescent lamp load (Duo circuit): 3600 VA Max. Fluorescent lamp load: 3600 VA Additional devices possible: Yes Voltage type of actuating voltage: AC Mounting depth: 55 mm Installation contactor with manual actuation and switching position display. Switch-on time 100%. Control power requirement 1.9W. Contact distance 3mm. Test voltage Contact/contact 2000W and test voltage control connections/contact 4000W.
€29.62
Eltako XR12-110-230VAC INSTALLATION PROTECTION
Eltako XR12-110-230VAC INSTALLATION PROTECTION
3-10 days
Installation protector series installation device with manual actuation and switching position display. AC-types with rectifier, therefore free of bruise and reduced power loss. Rated switching power 25 A/250 W AC, manual operation and switching position indicator. Switch-on time 100%. Control power requirement 1.9W. Contact distance 3mm. Test voltage Contact/contact 2000W and test voltage control connections/contact 4000W. Voltage type of operating voltage: AC Number of locks: 1 Number of openers: 1 Protection type (IP): IP20 Number of division units: 1 Max. Bulb load: 2300 W Rated operating current: 25 A Rated operating voltage: 250 - 250 W Max. Fluorescent lamp load (parallel compensated): 1000 VA Max. Fluorescent lamp load (Duo circuit): 3600 VA Max. Fluorescent lamp load: 3600 VA Additional devices possible: Yes Voltage type of actuating voltage: AC Mounting depth: 55 mm
€29.62
Eltako XR12-100-230VAC INSTALLATION PROCESS
Eltako XR12-100-230VAC INSTALLATION PROCESS
3-10 days
Installation protector series installation device with manual actuation and switching position display. AC-types with rectifier, therefore free of bruise and reduced power loss. Rated switching power 25 A/250 W AC, manual operation and switching position indicator. Switch-on time 100%. Control power requirement 1.9W. Contact distance 3mm. Test voltage Contact/contact 2000W and test voltage control connections/contact 4000W. Voltage type of operating voltage: AC Number of locks: 1 Number of openers: 0 Protection type (IP): IP20 Number of division units: 1 Max. Bulb load: 2300 W Rated operating current: 25 A Rated operating voltage: 250 - 250 W Max. Fluorescent lamp load (parallel compensated): 1000 VA Max. Fluorescent lamp load (Duo circuit): 3600 VA Max. Fluorescent lamp load: 3600 VA Additional devices possible: Yes Voltage type of actuating voltage: AC Mounting depth: 55 mm
€25.24
Eltako WSZ15DE-32A AC counter
Eltako WSZ15DE-32A AC counter
3-10 days
Electronic AC meter AC counters without approval for support rail. Stand-by loss only 0.5 Watt. Accuracy class B (1) % With S0 interface. This alternating current meter measures the active energy on the basis of the current flowing between the input and the output. The own consumption of only a maximum of 0.5 watt active power is not measured and not displayed. Like all counters without PTB or MID approval in Germany not approved for monetary current billing. Every 30 seconds, the display switches from the accumulated active energy to the instantaneous consumption in Watt for 5 seconds. 1 external conductor can be connected with a current up to 32A. In the event of a load to be expected of more than 50%, a ventilation distance of 1/2 division unit is to be maintained for devices mounted next to it. If the spacer DS12 is used. The starting current is 20ma. The display can only be read with power supply. However, the consumption is non-volatile and will be displayed immediately after a power failure. Two N-terminals for secure cross wiring of several counters. The decimal point which flashes depending on the power consumption indicates a power reference. In case of false connection, false appears in the display. The digital display has 7 digits. Up to 99999,99kWh, two descendants are displayed. From 100000.0kWh only one. Even with only theoretically conceivable maximum current reference, the display would be suitable for more than 15 years. The power reference is displayed with the decimal point. TLE: 1 Certified: No Measurement voltage: 230 W
€59.02
Eltako WSZ15D-65A MID AC counter MID ge
Eltako WSZ15D-65A MID AC counter MID ge
3-10 days
Electronic AC meter for mounting on support rail DIN-EN 60715 TH35, maximum current 32A, stand-by-loss only 0.4 Watt, accuracy class B (1)%, with S0 interface TLE: 1 current A: 5(65) Certified: Yes
€91.81
Eltako WSZ15D-32A MID AC counter MID ge
Eltako WSZ15D-32A MID AC counter MID ge
3-10 days
Electronic AC meter for mounting on support rail DIN-EN 60715 TH35, maximum current 32A, stand-by loss only 0.4 Watt, accuracy class B (1)%, with SO interface TLE: 1 current A: 5(32) Certified: MID calibrated tariff version of the electricity meter: tariff
€74.42
Eltako WNT12-24VDC-24W/1A power supply
Eltako WNT12-24VDC-24W/1A power supply
3-10 days
Wide-range switching power supply for mounting on support rail DIN-EN 60715 TH35 Overload and overtemperature protection by switching off with automatic switching on after the fault elimination (autorecovery function) secondary voltage 1: 24 W Width: 36 mm Max. Output power: 24 W Max. Output current: 1.0 A width in division units: 2 wide range switching power supply. Stand-by-loss only 0.2 Watt. With a load greater than 50% of the rated power and always with adjacent switching power supply components greater than 12 watts of rated power, and with dimmers, a 1/2 division unit is required on both sides with the distance pieces DS12. Efficiency 87%. Stabilized output voltage ±1%, low residual ripple. Short circuit. Overload and overtemperature protection by switching off with automatic switching on after eliminating errors (autorecovery function).
€68.96
Eltako WNT12-24VDC-12W/0.5A power supply
Eltako WNT12-24VDC-12W/0.5A power supply
3-10 days
Wide-range switching power supply for mounting on support rail DIN-EN 60715 TH35 overload and overtemperature protection by disconnecting with automatic switch-on after the fault removal (autorecovery function) wide-range switching power supply. Stand-by-loss only 0.2 Watt. With a load greater than 50% of the rated power and always with adjacent switching power supply components greater than 12 watts of rated power, and with dimmers, a 1/2 division unit is required on both sides with the distance pieces DS12. Efficiency 86%. Stabilized output voltage ±1%, low residual ripple. Short circuit. Overload and overtemperature protection by switching off with automatic switching on after eliminating errors (autorecovery function). Secondary voltage 1: 24 W Width: 18 mm Max. Output power: 12 W Max. Output current: 0.5 A width in division units: 1
€62.41
Eltako WNT12-12VDC-24W/2A power supply
Eltako WNT12-12VDC-24W/2A power supply
3-10 days
Wide-range switching power supply for mounting on support rail DIN-EN 60715 TH35 overload and overtemperature protection by disconnecting with automatic switch-on after the fault removal (autorecovery function) wide-range switching power supply. Stand-by-loss only 0.2 Watt. With a load greater than 50% of the rated power and always with adjacent switching power supply components greater than 12 watts of rated power, and with dimmers, a 1/2 division unit is required on both sides with the distance pieces DS12. Efficiency 83%. Stabilized output voltage ±1%, low residual ripple. Short circuit. Overload and overtemperature protection by switching off with automatic switching on after eliminating errors (autorecovery function). Secondary voltage 1: 12 W Width: 36 mm Max. Output power: 24 W Max. Output current: 2.0 A width in division units: 2
€68.96
Eltako WNT12-12VDC-12W1A Wide-switched.
Eltako WNT12-12VDC-12W1A Wide-switched.
3-10 days
Wide-range switching power supply for mounting on support rail DIN-EN 60715 TH35 overload and overtemperature protection by disconnecting with automatic switch-on after the fault removal (autorecovery function) wide-range switching power supply. Stand-by-loss only 0.2 Watt. With a load greater than 50% of the rated power and always with adjacent switching power supply components greater than 12 watts of rated power, and with dimmers, a 1/2 division unit is required on both sides with the distance pieces DS12. Efficiency 83%. Stabilized output voltage ±1%, low residual ripple. Short circuit. Overload and overtemperature protection by switching off with automatic switching on after eliminating errors (autorecovery function). Secondary voltage 1: 12 W Width: 18 mm Max. Output power: 12 W Max. Output current: 1.0 A width in division units: 1
€62.41
Eltako TLZ61NP-8..230VUC Stair switch. UP
Eltako TLZ61NP-8..230VUC Stair switch. UP
3-10 days
Steplight time switch, electronic for UP mounting, built-in device quietly and timely, max. 50ma Glow lamp current, time range stepless to 10 minutes adjustable, 4-wire switchable, rated switching power 10 A/250 W AC, control voltage 8...230 W UC Stair switch 230V+UC. 1 lock not potential-free 10A/250V AC, incandescent lamps up to 2000W, ESL and LED lamps up to 200W, switch-off warning and push-button continuous light. Stand-by-loss only 0.7 Watt. With ESL optimization. For installation. 45mm long, 45mm wide, 18mm deep. Contact circuit in the zero passage for protecting the contacts and lamps. In particular, this extends the service life of energy-saving lamps. By using a bistable relay, there is no coil loss power and no heating as a result even in the switched-on state. After installation, wait for the automatic short synchronization before the switched consumer is placed on the network. Control, supply and switching voltage 230W. In addition with galvanically separated universal control voltage 8..230V UC. Time setting 1 to 12 minutes. Glow lamp current up to 50ma, depending on the ignition voltage of the glow lamps. For 3- and 4-wire circuits, switchable, with attic lighting at 4-wire circuit. Automatic detection of the circuit type. After a power failure, the illumination is switched on again when the time sequence has not yet been completed. When switched off, the lighting flickers approx. 30 seconds before the time sequence beginning and a total of 3 times in shorter time intervals. When the pushbutton permanent light is switched on, it is possible to set for longer than 1 second by means of buttons, which is switched off automatically after 60 minutes or can be switched off with buttons for longer than 2 seconds. If the pushbutton continuous light and the switch-off pre-warning are switched on, the switch-off pre-warning takes place after the switch-off of the continuous light. All or part of
€44.37
Eltako TLZ61NP-230V Stair Time Switch
Eltako TLZ61NP-230V Stair Time Switch
3-10 days
Steplight time switch, electronic for installation and AP installation, 10A/250V AC, control voltage 230W AC, Glow lamp current 50ma, with pumps, switch-off warning and pushbutton continuous light, in addition the function: current surge switch with drop-back delay ESW, contact circuit in the zero crossing of the sine wave to the device and lamp-saving stairlight time switch 230W. 1 lock not potential-free 10A/250V AC, incandescent lamps up to 2000W, ESL and LED lamps up to 200W, switch-off warning and push-button continuous light. Stand-by-loss only 0.7 Watt. With ESL optimization.For installation. 45mm long, 45mm wide, 18mm deep. Contact circuit in the zero passage for protecting the contacts and lamps. In particular, this extends the service life of energy-saving lamps. By using a bistable relay, there is no coil loss power and no heating as a result even in the switched-on state. After installation, wait for the automatic short synchronization before the switched consumer is placed on the network. Control, supply and switching voltage 230W. Time setting 1 to 12 minutes. Glow lamp current up to 50ma, depending on the ignition voltage of the glow lamps. For 3- and 4-wire circuits, switchable, with attic lighting at 4-wire circuit. Automatic detection of the circuit type. After a power failure, the illumination is switched on again when the time sequence has not yet been completed. When switched off, the lighting flickers approx. 30 seconds before the time sequence beginning and a total of 3 times in shorter time intervals. When the pushbutton permanent light is switched on, it is possible to set for longer than 1 second by means of buttons, which is switched off automatically after 60 minutes or can be switched off with buttons for longer than 2 seconds. If the pushbutton continuous light and the switch-off pre-warning are switched on, the switch-off pre-warning takes place after the switch-off of the continuous light. Become a full or part
€42.73
Eltako TLZ12D-plus stairlight time switch
Eltako TLZ12D-plus stairlight time switch
3-10 days
Steplight time scale for mounting on support rail DIN-EN 60715 TH35, 16 A/250 V AC not potential-free, incandescent lamps up to 2300 W, ESL and LED lamps up to 200 W, control voltage 230 V and/or 8..230 V UC, switch off pre-warning and pushbutton continuous light, standby loss adjustable only 0.5 Watt. Stand-by-loss only 0.7 Watt. With ESL optimization and multifunction. The functions and times are entered according to the user manual with the MODE and SET keys and displayed digitally on the -LC display. A key lock is possible. Contact circuit in the zero passage for protecting the contacts and lamps. In particular, this extends the service life of energy-saving lamps. The noiseless electronics do not harass the most sensitive ear, unlike many synchronous motors with mechanical transmission. By using a bistable relay, there is no coil loss power and no heating as a result even in the switched-on state. After installation, wait for the automatic short synchronization before the switched consumer is placed on the network. Control, supply and switching voltage 230V. In addition with galvanically separated universal control voltage 8..230V UC. For 3- and 4-wire circuits, switchable, with attic lighting at 4-wire circuit. Automatic detection of the circuit type. Glow lamp current up to 50mA, depending on the ignition voltage of the glow lamps. Precise time setting 1 to 99 minutes. Own continuous light button with the protruding button SET in the functions TLZ, ESV, ES and ER. With motion detector control input BM, which converts the input signal into a control pulse in the function TLZ. Width in division units: 1 Relapse delay: 1 - 1 min Function: electronic with multifunction Assembly type: DIN rail Number of locks: 1 Control voltage 1: 230 - 23
€54.75