Distribution installation

Legrand Safety switch TX3 according to EN 60898-1, VDE 0641-11, EN 60947-2, 3-pin with switching neutral conductor, C-characteristics, measurement current In 16 A, measurement switching capacity Icn10 kA according to EN 60898-1, measurement voltage Un 400 VAC, measurement frequency 50/60 Hz, energy limiting class 3, attachment to hat profile rail EN 607. Circuit protection switches with C-characteristics are provided for line protection in devices with high switch-on currents (e.g. motors and transformers).

Legrand Safety switch TX3 according to EN 60898-1, VDE 0641-11, EN 60947-2, 3-pin with interconnecting neutral conductor, C-characteristics, measurement current In 20 A, measurement switching capacity Icn10 kA according to EN 60898-1, measurement voltage Un 400 VAC, measurement frequency 50/60 Hz, energy limiting class 3, attachment to hat profile rail EN 607. Circuit protection switches with C-characteristics are provided for line protection in devices with high switch-on currents (e.g. motors and transformers).

Legrand Safety switch TX3 according to EN 60898-1, VDE 0641-11, EN 60947-2, 3-pin with switching neutral conductor, C-characteristics, measurement current In 25 A, measurement switching capacity Icn10 kA according to EN 60898-1, measurement voltage Un 400 VAC, measurement frequency 50/60 Hz, energy limiting class 3, attachment to hat profile rail EN 607. Circuit protection switches with C-characteristics are provided for line protection in devices with high switch-on currents (e.g. motors and transformers).

Legrand Safety switch TX3 according to EN 60898-1, VDE 0641-11, EN 60947-2, 3-pin with switching neutral conductor, C-characteristics, measurement current In 32 A, measurement switching capacity Icn10 kA according to EN 60898-1, measurement voltage Un 400 VAC, measurement frequency 50/60 Hz, energy limiting class 3, attachment to hat profile rail EN 607. Circuit protection switches with C-characteristics are provided for line protection in devices with high switch-on currents (e.g. motors and transformers).

Legrand auxiliary switch, 1 changer, reports the switching state for manual and fault triggering, for LS switches, FI/ FILS protection switches Legrand TX3 and DX3 series. Tool-free assembly by simple latching on the left side of the main device, maximum per main device 3 auxiliary devices or 2 auxiliary devices + 1 command device.

Legrand Compensation element, 0.5-modulated, mounting on DIN profile rail EN 60715, for heat decoupling between individual distributor devices. For compensation when using half modules. As a blind cover for unused distribution mask fields.

Legrand DX3, 1-pole, 20A 250 VAC, according to EN 60947-3, EN 60669-2-4. Use category AC-22A. Fastening to DIN profile rail EN 60715 by latching quick fixes, clear information at the front on each device, unambiguous switching position indicator red/green on switching lever (lockable), with labeling window, one-pole displaceable with Legrand Pin comb rails, attachment of auxiliary devices possible.

Legrand DX3, 1-pole, illuminated, 20A 250 VAC, according to EN 60947-3, EN 60669-2-4. Use category AC-22A. Fastening to DIN profile rail EN 60715 by latching quick fixes, clear information at the front on each device, unambiguous switching position indicator red/green on switching lever (lockable), with labeling window, one-pole displaceable with Legrand Pin comb rails, attachment of auxiliary devices possible.

Legrand DX3, 3-pin, 63A 400 VAC, according to EN 60947-3, EN 60669-2-4. Use category AC-22A. Fastening to DIN profile rail EN 60715 by latching quick fixes, clear information at the front on each device, unambiguous switching position indicator red/green on switching lever (lockable), with labeling window, one-pole displaceable with Legrand Pin comb rails, attachment of auxiliary devices possible.

Legrand DX3, 4-pin, 63A 400 VAC, according to EN 60947-3, EN 60669-2-4. Use category AC-22A. Fastening to DIN profile rail EN 60715 by latching quick fixes, clear information at the front on each device, unambiguous switching position indicator red/green on switching lever (lockable), with labeling window, one-pole displaceable with Legrand Pin comb rails, attachment of auxiliary devices possible.

Legrand Safety switch DX3 according to EN 60898-1, VDE 0641-11, EN 60947-2, 1-pole with switching neutral conductor, C-characteristics, measurement current In 13 A, measurement switching capacity Icn 6 kA according to EN 60898-1, measurement voltage Un 230 VAC, measurement frequency 50/60 Hz, energy limiting class 3, attachment to hat profile rail. Circuit protection switches with C-characteristics are provided for line protection in devices with high switch-on currents (e.g. motors and transformers).