Fastening material

Material: polypropylene. Halogen-free. Colour: natural. Material nail: steel. Number of lines NYM 3x1.5 mm2 : 2. Material disc: plastic. With nail. Nail length: 60 mm nail-Ø: 3.5 mm

Material: polypropylene. Halogen-free. Colour: natural. Material nail: steel. Number of lines NYM 3x1.5 mm2 : 2. Material disc: plastic. With nail. Nail length: 40 mm nail-Ø: 3 mm

Material: polypropylene. Halogen-free. Colour: natural. Material nail: steel. Number of lines NYM 3x1.5 mm2 : 2. Material disc: plastic. With nail. Nail length: 50 mm nail-Ø: 3.5 mm

Hook nails serve for fastening, for example, of installation tubes. with 4-edge-shaft. Ø: 3.0 mm. Material: steel VE/St.: 100 Length: 70 mm

Plug-in clamp with lever EN 60998-1:2004, EN 60998-2-2:2004, plug-in clamp for rigid, multi-wire and flexible conductors, for rigid conductors it is not necessary to open/close the lever before inserting the conductor, for flexible conductors, several wire cross sections compatible in one clamp, material housing and lid: polycarbonate, material insert: copper, material spring: stainless steel, insulation length 10 mm. Ambient temperature: T85, Protection type: IP20, Lever colour: blue, Test opening: Phase tester and test pin (max. Ø 2 mm,) View window for checking the clamping point leads to increased safety during assembly, high draw-off forces, time-saving, screw-free technology, easy handling Number of clamping points: 3 Colour: transparent Rated cross-section from/to: 0.2 - 2.5 mm2 Rated voltage: 450 W Rated current: 24 A

Suitable for: gypsum board, limited for gypsum fiber boards, solid gypsum boards and pore concrete. For fastening: objects that can be fastened with wood or chipboard screws: pictures, lamps, base strips, key boxes, spice shelves. Time-saving fastening system. Cutting into the building material ensures optimal anchoring. Effortless setting with cross-slot blade, by hand or with electric drill screwdriver. No special setting tool required. Very good centering by dowel tip. No bursting on the back of the plate. Heat resistant. Length: 34 mm. Screw-Ø: 4-5 mm. Material: zinc die casting. PGKDM34S: With screw (Senkkopf, Pozidrive, blue galvanized, 4.0 x 40, full thread)

Suitable for: gypsum board, limited for gypsum fiber boards, solid gypsum boards and pore concrete. For fastening: objects that can be fastened with wood or chipboard screws: pictures, lamps, base strips, key boxes, spice shelves. Time-saving fastening system. Cutting into the building material ensures optimal anchoring. Effortless setting with cross-slot blade, by hand or with electric drill screwdriver. No special setting tool required. Very good centering by dowel tip. No bursting on the back of the plate. Heat resistant. Length: 34 mm. Screw-Ø: 4-5 mm. Material: zinc die casting. PGKDM34S: With screw (Senkkopf, Pozidrive, blue galvanized, 4.0 x 40, full thread)

Suitable for: C20/25 to C50/60. For fastening: pipe and ventilation lines, brackets, ladders, cable trays, suspended ceilings, steel structures such as grids or formwork supports. Fast mounting with high holding force. Low drilling effort and easy impact with the hammer or machine. Metric internal thread for the use of commercially available screws and threaded rods. For use as multiple fastening of non-supporting systems in concrete. Length: 40 mm Thread: M10 Hole-Ø: 12 mm

Suitable for: panels, panels and for hollow wallwork and hollow ceilings with large chambers, limited for perforated materials. For fastening: pictures, lamps, base strips, key boxes, wall shelves, hanging cabinets, towel holders, curtain rails. Multiple split dowel with pre-assembled metric screw. Material: galvanized. Easy assembly with screwdriver or assembly pliers. The spreading support elements guarantee a large bearing surface behind the plate and optimal holding values. The screw can be released again without loss of the holding force of the dowel on the plate. Pmhd4x6s - PMHD6x38S: with metric cross screw. PMHD8x16S + PMHD8x32S: with metric hexagonal screw. All details in the table in mm dowel Øxl: 8x22 screw Øxl: M4x30 plate thickness: 0 - 6

Hook nails serve for fastening, for example, of installation tubes. with 4-edge-shaft. Ø: 3.0 mm. Material: steel VE/St.: 100 Length: 50 mm

Hook nails serve for fastening, for example, of installation tubes. with 4-edge-shaft. Ø: 3.0 mm. Material: steel VE/St.: 100 Length: 60 mm

Suitable for: panels, panels and for hollow wallwork and hollow ceilings with large chambers, limited for perforated materials. For fastening: pictures, lamps, base strips, key boxes, wall shelves, hanging cabinets, towel holders, curtain rails. Multiple split dowel with pre-assembled metric screw. Material: galvanized. Easy assembly with screwdriver or assembly pliers. The spreading support elements guarantee a large bearing surface behind the plate and optimal holding values. The screw can be released again without loss of the holding force of the dowel on the plate. Pmhd4x6s - PMHD6x38S: with metric cross screw. PMHD8x16S + PMHD8x32S: with metric hexagonal screw. All details in the table in mm dowel Øxl: 8x32 screw Øxl: M4x39 plate thickness: 3 - 12