ABB

ABB Phase rails enable secure and economical cross-wiring of automatic fuses, fault current protection devices and other modular installation devices. The following must be taken into account for a correct phase rail selection: terminal type (double terminal or cage terminal), number of terminals (1, 2, 3, 4, 1+N or 3+N), type of device (automatic, fault current protection devices or modular installation devices), combinations of the different types of device, use of automatic fuses with auxiliary switches mounted on the right and the bottom, phase rail connection cross-section (current loadability), number of modules (extractable phases)

for opening monitoring windows, doors complete for screwing or drilling. Content: 1 magnet, 1 reed contact with 4.0 m connection cable LIJY 4 x 0.14 mm2, 2 housings, 2 spacer plates, 2 flanges, 4 fastening screws antimagnetic. VdS No. G 191549. Wds Kl. B.

for opening monitoring windows, doors complete for screwing or drilling. Content: 1 magnet, 1 reed contact with 4.0 m connection cable LIJY 4 x 0.14 mm2, 2 housings, 2 spacer plates, 2 flanges, 4 fastening screws antimagnetic. VdS No. G 191549. Wds Kl. B.

Water detector SWM 4/RN, connectable to any supply voltage in the range of 10 ... 23 W DC, has potential-free relay output as changer, an LED parallel output and LED display. The detector is automatically reset when drying.

Serves the overvoltage protection of EIB/KNX components.

The universal interface has 4 channels. These can be parameterized with the aid of the ETS as input or output. Conventional probes, auxiliary contacts, light-emitting diodes and the electronic relay ER/U 1.1 can be connected to the connection lines. These can be extended up to 10 m. The contact interrogation voltage and the supply voltage for the Leds are provided by the device, the resistors for the Leds are integrated.

The universal interface has 2 channels. These can be parameterized with the aid of the ETS as input or output. Conventional probes, auxiliary contacts, light-emitting diodes and the electronic relay ER/U 1.1 can be connected to the connection lines. These can be extended up to 10 m. The contact interrogation voltage and the supply voltage for the Leds are provided by the device, the resistors for the Leds are integrated.

Solves project-specific control tasks and can perform 3 different functions simultaneously. The following functions are available in each case: logic gate, gate, timer, multiplier, Min/Max value transmitter, temperature comparator, switch value, threshold value detection, format converter, scenes, counters, stair light.

USB401RM Universal detector base for detector series 300, e.g. ORM2351, for connection of detectors to fire detector centers of limit value technology for cleaning installation in dry rooms

High-performance magnetic reed switch for garage doors and heavy metal doors, reed contact with 4.0m connection cable.

for monitoring the glass surfaces of windows, shop windows and doors, high interference safety, integrated storage display. For operation directly at alarm groups of intrusion alarm centers or safety terminals. Extremely small dimensions. Dimensions: H x B x T = 18 x 18 x 9 mm. Mounting takes place on glass with Loctite glue (LKS). With 5 m connection cable. VdS-Nr. G 194524. Wds Kl. B.

Actuating lock for automatic fuses and switches. To protect against unauthorized or dangerous actuation of the shift lever. An adapter allows locking of the switching lever both in the switched-off and in the switched-on state. The locking is effected by means of a padlock with a bracket diameter of max. 3 or 6 mm. In multi-pole devices, it is possible to provide 1 lock per pole each. The actuating lock is suitable for all automatic locking devices of the S200 and S 280 series, RCBO DS201-DS202C and switch E 200 .