ABB

The device queries 8 potential-free contacts with internally generated interrogation voltage. The input state is displayed over 8 yellow LED’s. The binary inputs allow the detection of 8 independent input signals. Each channel has a button for manual operation. The devices are used by ABB i-bus® supplies and does not require additional power supply.

The KNX voltage supply 640 ma with diagnostic function and extended LED display generates and monitors the KNX system voltage (SELV). With the integrated throttle, the bus line is decoupled from the voltage supply. The voltage output is short-circuit-proof and overload-proof. The two-color LED indicates the status of the device. The device has an additional short-circuit-proof and overload-proof 30 W DC voltage output. This can be used for feeding a further bus line (in conjunction with a separate throttle). The voltage supply has a wide-range input for the supply voltage in the range 85Å265 W AC,50/60 Hz.

The ABB i-bus® KNX Line Coupler LK/S 4.2 is a series installation device with 2 TE module width. It is used as a line/range coupler or line amplifier. As a line coupler, the LK/S connects a line with a main line, as a region coupler a main line with a region line. It provides a galvanic separation. The group addresses of the main groups 14 . . . 31 can be filtered in conjunction with the ETS 4 .

Fault current protection devices (Rccbs) offer personal and property protection as well as protection against electrically ignited fires according to DIN WDE 0100-410 and DIN WDE 0100-530. The F200 series fault current protection switches ensure protection against sinusoidal alternating currents, pulsating currents and smooth direct fault currents. As well as fault protection (protection in indirect contact), additional protection (with I?n = 30 ma) and fire protection (with I?n = 300 ma). They meet product standards for type A IEC/EN 61008-1, 61008-2-1, 61543 (WDE 0664 10, 11, 30) and type B DIN EN 62423 (WDE 0664-40). Areas of application are predominantly in industrial and commercial applications. The extensive range of accessories offers you everything you need for your installation tasks. The RCCB type B is suitable for non-linear circuits that can generate fault currents with smooth direct fault currents and with different (high/) frequencies. These components are located in electronic operating means such as frequency converters. The RCCB type B has a frequency range of 0...2 khz to detect the fault current and offer a high system availability.

Combination device with 8 binary inputs and 8 switching actuators. Conventional probes or auxiliary contacts can be connected to 8 channels. The information of the contact query can be used for controlling Busch-free@home® actuators or for detecting status information. The contact interrogation voltage is provided by the device itself. Maximum cable length for cable cross section 1.5 mm2 < 100m For switching 8 independent 230 W~ consumers.

The following values are output via a seven-segment display with up to 7 digits: active energy (class 1), power, currents, voltages (L-L; L-N) and frequency both per phase and total. The communication can take place via the integrated interface M-Bus or via the infrared interface for connecting a KNX module. The energy meter has an output. This can optionally be used as a pulse output for outputting the active energy or as an alarm output. Up to 25 alarm values (swell values with time delay) can be set here. The counter is calibrated according to MID and approved according to IEC. The installation width is 4 DIN modules.

For controlling a maximum of eight independent 230 W AC drives for positioning blinds, roller shutters, awnings and other hangings, as well as for controlling doors, windows and ventilation flaps. With manual operation directly on the device. No auxiliary voltage required. The outputs are interlocked electromechanically. Functions: On/off, lamella adjustment/stop, position and scene control, safety functions, sun protection and heating/cooling automatic, status messages.

Switches independent electrical consumers via potential-free contacts 12 ABB i-bus®. The manual operation of the contact is possible for each output. The switching state of the contact is displayed. The 16A-AC1 series is suitable for switching ohmic, inductive and capacitive loads.

To drive DALI participants via ABB i-bus®. A DALI output for max. 64 DALI participants. The DALI power supply is integrated. The activation can take place per DALI subscriber (64), via groups (16), together in the broadcast or via scenes (16). Extensive error and interference messages are available. DALI emergency light converter(64) according to EN 62386-202 are supported. The function test and continuous tests can be triggered via KNX via the emergency light converter and the result can be made available on the KNX. Slave, staircase light, locking and forced guidance function are integrated. The DALI telegram rate is variable. A separate diagnostic and commissioning tool is provided for individual re-addressing of the DALI participants or group assignment, ABB i-bus tool available.

forms the interface between KNX installations and IP networks and works according to the KNXnet/IP specification (tunneling and routing). The IPR/S can be used as a fast line or range coupler (routing). The complete filter table for all main groups (0-31) can be loaded. With the ETS, KNX devices can be programmed via LAN. 5 tunneling servers are available for this and for other clients. The IP address of the IPR/S can be set or received by a DHCP server. The power supply is over 12..30 W DC or alternating via Power-over-Ethernet (Poe) to IEEE 802.3af Class 1. Alternatiw to KNX Standard Communication (Multicast) can communicate up to 10 IPR/S 3.1.1 via Unicast.

For controlling a maximum of eight independent 230 W AC drives for positioning blinds, roller shutters, awnings and other hangings, as well as for controlling doors, windows and ventilation flaps. With automatic driving time determination and manual operation directly on the device. No auxiliary voltage required. The outputs are interlocked electromechanically. Functions: On/off, lamella adjustment/stop, position and scene control, safety functions, sun protection and heating/cooling automatic, status messages.

To drive DALI participants via ABB i-bus®. Two DALI output for max. 2x64 DALI participants. The DALI power supply is integrated. The activation takes place per DALI subscriber (2x64), about groups (2x16), together in the broadcast or through scenes (2x16). Extensive error and interference messages are available. DALI emergency light converter (2x64) are supported in accordance with EN 62386-202. The function test and continuous tests can be triggered via KNX via the emergency light converter and the result can be made available on the KNX. Slave, staircase light, locking and forced guidance function are integrated. The DALI telegram rate is variable. A separate diagnostic and commissioning tool, i-bus tool is available for individual re-addressing of the DALI participants or group assignment.