ABB

As a main switch between the last overcurrent protective element before the measuring device and the circuit distributor. The main switch is lockable. The main switches can also be used for various other applications. With double-breaking switching contacts and short-circuit strength up to 10 ka with pre-locking In < 63 A; gg

Motor protection switch MS116 with thermal and electromagnetic protection stands for the compact and economical series for engine protection up to 15 kw (400 W) with a module width of 45 mm. The temperature-compensated device has a rotary handle operation with a clear switching position indicator I/0. The rotary handle can be locked in the 0 position by means of a closing device. Auxiliary and signal contacts as well as undervoltage and working current triggers can be installed without tools. 3-phase rails for 65 A or for 100 A and feed-in blocks for 25 mm2 or 35 mm2 permit the joint feeding of several motor protection switches. Protective housing as well as accessories for control cabinet and door mounting supplement the range.

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN WDE 0100-430 and DIN WDE 0100-530. They meet the construction requirements DIN WDE 0641-11 and IEC/EN 60898-1, DIN WDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

Actuating lock for automatic fuses and switches. To protect against unauthorized or dangerous actuation of the shift lever. An adapter allows locking of the switching lever both in the switched-off and in the switched-on state. The locking is effected by means of a padlock with a bracket diameter of max. 3 or 6 mm. In multi-pole devices, it is possible to provide 1 lock per pole each. The actuating lock is suitable for all automatic locking devices of the S200 and S 280 series, RCBO DS201-DS202C and switch E 200 .

Protector AF09 to AF96 from 4 to 45 kw AC-3 (400 W) stand for the compact series with AC/DC control and very wide coil voltage ranges. Only 4 coils cover control voltages from 20...500 WDC to 24...500 VAC - without additional required extinguishing elements. They can therefore be used worldwide and only in low variance. They switch power circuits with motors, slightly inductive or non-inductive loads. Flexible exchangeable coil connection terminals allow the connection from above, from below or from above and below. Attachable accessories are 1- and 4-pole auxiliary switches that can be plugged on the front side and 2-pole auxiliary switches that can be mounted on the right and left side. A further auxiliary switch block with 1S+1Ö and coil connections A1 and A2 is available until AF65. All auxiliary contacts are designed as mirror contacts according to IEC60947-5-1 Annex L. Other accessories such as timepieces, wiring aids and locking members, among others, complement the range.

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN WDE 0100-430 and DIN WDE 0100-530. They meet the construction requirements DIN WDE 0641-11 and IEC/EN 60898-1, DIN WDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

4-pole contactor ESB40..N with 54 mm width control 3-phase loads up to 40 A (O-contacts up to 30 A) and are available in different contact conditions and coil voltages. They switch electrical heaters, water heaters, pumps, ventilation and other drives as well as lighting. They operate both with AC and DC control voltages through an integrated coil circuit. The devices are therefore absolutely bruised and quiet when switching. An auxiliary switch, which can be installed on the left side as an accessory, as well as plombier caps and a spacer supplement the range. ESB40..N have installation design and meet, among others, the EN61095 household standard, so they are particularly suitable for distribution installation.

Protector AF09 to AF96 from 4 to 45 kw AC-3 (400 W) stand for the compact series with AC/DC control and very wide coil voltage ranges. Only 4 coils cover control voltages from 20...500 WDC to 24...500 VAC - without additional required extinguishing elements. They can therefore be used worldwide and only in low variance. They switch power circuits with motors, slightly inductive or non-inductive loads. Flexible exchangeable coil connection terminals allow the connection from above, from below or from above and below. Attachable accessories are 1- and 4-pole auxiliary switches that can be plugged on the front side and 2-pole auxiliary switches that can be mounted on the right and left side. A further auxiliary switch block with 1S+1Ö and coil connections A1 and A2 is available until AF65. All auxiliary contacts are designed as mirror contacts according to IEC60947-5-1 Annex L. Other accessories such as timepieces, wiring aids and locking members, among others, complement the range.

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN WDE 0100-430 and DIN WDE 0100-530. They meet the construction requirements DIN WDE 0641-11 and IEC/EN 60898-1, DIN WDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

EF19 are self-serviced electronic overload relays that do not require additional external power supply. In an overload event or in a phase failure, they reliably protect motors. They are easy to use like thermal overload relays and compatible with standard motor applications. Thanks to their wide range of adjustments, their high accuracy, high operating temperature range and the ability to select from 3 trigger classes (10E, 20E, 30E). The overload relays are connected directly to the contactor. Individual setup sets are available as accessories. Manual or automatic resetting selectable, phase failure sensitivity according to IEC/EN 60947-4-1, temperature compensation, TEST and STOP function, trigger display integrated on the front, trigger and signal contact (1 closer/1 opener).

Motor protection switch MS116 with thermal and electromagnetic protection stands for the compact and economical series for engine protection up to 15 kw (400 W) with a module width of 45 mm. The temperature-compensated device has a rotary handle operation with a clear switching position indicator I/0. The rotary handle can be locked in the 0 position by means of a closing device. Auxiliary and signal contacts as well as undervoltage and working current triggers can be installed without tools. 3-phase rails for 65 A or for 100 A and feed-in blocks for 25 mm2 or 35 mm2 permit the joint feeding of several motor protection switches. Protective housing as well as accessories for control cabinet and door mounting supplement the range.

The universal interface has 2 channels. These can be parameterized with the aid of the ETS as input or output. Conventional probes, auxiliary contacts, light-emitting diodes and the electronic relay ER/U 1.1 can be connected to the connection lines. These can be extended up to 10 m. The contact interrogation voltage and the supply voltage for the Leds are provided by the device, the resistors for the Leds are integrated.