List of products by brand Hager

Energy meter MID three-phase, 2 tariff, direct measurement 100A three-phase energy meter for direct measurement of active energy up to 100A with high accuracy (class B). The counters are delivered calibrated at work, i.e. the calibration costs are included. Possibility to recalibrate after 8 years, a plombier set is included. Suitable for use in all network systems and equipped with additional 2 tariff counting. They are equipped with an illuminated digital display that allows the display of energy consumption and power in a resolution of 7 digits including a descending point. A total counter is integrated. The consumption (counter value) can be transmitted remotely by a pulse output. Wiring errors and connection errors are displayed and the measurement data are stored periodically. Connection: Direct connection Operating current: 0.08/100 A Max. Current (I max) of the measuring circuit: 100 A Power consumption: 7.5 VA Number of modules: 7 Certified: yes Frequency: 50/60 Hz

Mounting type: plasterdetection angle: 140 °Protection type: IP55max. Mounting height: 4 mCovering field Diameter on floor: 16 mContact Loading: AC1Contact type: 1W + NSwitching power Glülampen: 1500 WBrightness measurement range: 5/1000 LuxControl of sensitivity: noSupply voltage: 230V +10% / -15%Frequency: 50 HzColor: whiteHeight installed product: 2.5 m

outdoor motion detector lighting control in commercial buildings and residential buildings by recording moving persons. detection range of 200° and a range of max. 16m at a recommended mounting height of 2.5m. Horizontal lens adjustment of +/- 80° and vertical lens adjustment of 0-30°. detection using Fresnel lenses. Limiting the monitoring area by means of included apertures possible. The time delay and the brightness value are set directly on the device, a pulse can also be generated. Mounting on ceiling and corners using optional mounting adapter EE825 or. EE827 possible.Assembly type:CoatingDetection angle:200 °CType of protection:IP55max. Assembly chair:4 mDiameter field on floor:16 mContact loadability:AC1Contact type:1W + NSwitching power bulbs:1500 WBrightness measurement range:5 / 1000 LuxControl of sensitivity:noSupply voltage:230V +10% / -15%Frequency:50 HzColor:whiteHeight installed product:2.5 m

External motion detectors for lighting control in commercial buildings and residential buildings by means of the collection of moving persons. detection range of 360° with under-crime protection for local detection and a diameter of max. 12m at a recommended mounting height of 2.5m. vertical lens adjustment of + 90°/-30°. detection using Fresnel lenses. The time delay and the brightness value are set directly on the device or by optional remote control EE 806 possible, a pulse can also be generated. Adjustment of sensitivity from 20% to 100% possible Additional potential-free closing contact. Mounting on wall and ceiling possible. At corners with optional mounting adapter EE855.Assembly type:CoatingDetection angle:360°Type of protection:IP55max. Assembly chair:4 mDiameter field on floor:12 mContact loadability:AC1Contact type:1W + NSwitching power bulbs:1500 WBrightness measurement range:5 / 1000 LuxControl of sensitivity:yesSupply voltage:230V +10% / -15%Frequency:50/60 HzColor:whiteHeight installed product:2.5 m

Switching clock electromechanical without power reserve daily clock 1W 16A, 2 PLE daytime clock electromechanical to time control of equipment; Mounting on hat rail; Switching steps in 30 minutes without Unbound turntable;Contact type: 1W Contact Loading: 16A 250V AC1 Clock type: Daily clock Programming method: analog shortest switching time: 30 min Power reserve: no Connection type: screw technology Operating temperature: -10 to 55 °C Storage temperature: -20 to 70 °C Type of protection: 20 Number of modules: 2 Assembly type: DIN rail (REG)

electric mechanical control with power reserve daily clock 1W 16A, 2 PLE daily control clock electromechanically at the time of operation; Mounting on hat rail; switching steps at a 30 minute distance with power reserve due to unleashable switch riders; Contact type: 1WContact Loading: 16A 250V AC1Clock type: Daily clockProgramming method: analogshortest switching time: 30 minPower reserve: 200 pcsConnection type: screw technologyOperating temperature: -10 to 55 °CStorage temperature: -20 to 70 °CProtection type: IP20Number of modules: 2Mounting type: plaster

Stair timing switch with low gear. At the time the lighting is limited. Automatic detection of the 3- or 4-wire connection. Hand switch at the Geraet - automatic or continuous lighting. AC voltage: 195/230/253 VFrequency: 50/60 HzContact type: 1SContact Loading: 16A 250V AC1max. Quiet current for probes: 100 mAMax. bulb load: 2300 WControl voltage AC current: 230 VAdjustment range delay time: 30S - 10MinConnection type: screw technologyConnection cross-section with flexible conductor: 1 - 6mm2Connection cross section for rigid conductor: 1.5 - 10mm2Operating temperature: -10 to 55 °CStorage temperature: -20 to 60 °CNumber of modules: 1Protection type: IP20Assembly type: DIN rail (REG)

Remote switch 1 Locker 230V AC 16A 1PLEremote switch for pulse control of lighting circuits and others Built according to EN60669-1; EN60669-2-2. Fingerproof according to BGVA2. Contact position display and manual operation. Labeling option directly on the device. Contact type: 1S Number of contacts: 1 Rated current: 16 A Control voltage AC current: 230 V Control voltage DC current: 110 V Number of modules: 1 Operating voltage AC current: 250 V Isolation voltage: 250 V Frequency: 50/60 Hz Connection type: Screw technology Connection cross-section at rigid conductor: 1.5 - 10mm2 Operating temperature: -5 to 40 °C Storage temperature: -40 to 80 °C

Remote switch 2 closer 230V AC 110V DC 16A 1PLE. Remote switch for pulse control according to EN60669-1 and EN60669-2-2 and finger protection according to BGVA2. With contact position display, manual operation, marking option directly on the device and suitable for subsequent installation of additional devices.

Installation relays for pulse control of circuits up to max. 16 A, according to EN 61095 and DIN VDE 0637-3 as well as contact protection according to DIN VDE 0106 part 100. With contact position display by display window, integrated labeling field and suitable for subsequent installation of additional device. Notes: If several devices are installed directly, a spacer (1/2 PLE) must be installed next to each second device.Contact type: 2S nominal current: 16 AControl voltage AC current: 230 V Number of modules: 1 Rated operating voltage Ue: 230 V Frequency: 50/60 Hz

Installation relays 16A 1S + 1Ö 230V Installation relays for pulse control of circuits up to max. 16 A, according to EN 61095 and DIN VDE 0637-3 as well as contact protection according to DIN VDE 0106 part 100. With contact position display by display window, integrated labeling field and suitable for subsequent installation of additional device. Notes: If several devices are installed directly, a spacer (1/2 PLE) must be installed next to each second device.Contact type: 1Ö+1SRated current: 16 A Control voltage AC current: 230 V Number of modules: 1Rated operating voltage Ue: 230 V Frequency: 50 Hz

Installation relays, 25A,2S, 230V

auxiliary switch 6A 1 closer and 1 opener 230V

Installation Protector 25A 2S 230V Protector in compact design, builtin accordance with EN 61095; DIN VDE 0637-3,Contact position display bydisplay window; plombable withplumbing cap(accessories);auxiliary switches areCan be flanged. IntegratedLabel field. Contact protection afterDIN VDE 0106 part 100AC voltage: 230 VNumber of modules: 1Operating temperature: -10 to 50 °CStorage temperature: -40 to 80 °CConnection type: screw technologyConnection cross-section with flexible conductor: 1 - 6mm2Connection cross section for rigid conductor: 1 - 10mm2Contact type: 2S

Installation Protector 25A 1S+1Ö 230V Protector in compact design according to EN 61095 and DIN VDE 0637-3 as well as contact protection according to DIN VDE 0106 part 100. Contact position display by display window, integrated labeling field and suitable for subsequent installation of additional device. Notes: If several devices are installed directly, a spacer (1/2 PLE) must be installed next to each second device. Rated current: 25 A Control voltage AC current: 230 V Number of modules: 1 Rated operating voltage Ue: 230 V Frequency: 50 Hz Connection type: Screw technology