List of products by brand Hager

Energy meter MID three-phase, 2 tariff, direct measurement 100A three-phase energy meter for direct measurement of active energy up to 100A with high accuracy (class B). The counters are delivered calibrated at work, i.e. the calibration costs are included. Possibility to recalibrate after 8 years, a plombier set is included. Suitable for use in all network systems and equipped with additional 2 tariff counting. They are equipped with an illuminated digital display that allows the display of energy consumption and power in a resolution of 7 digits including a descending point. A total counter is integrated. The consumption (counter value) can be transmitted remotely by a pulse output. Wiring errors and connection errors are displayed and the measurement data are stored periodically. Connection: Direct connection Operating current: 0.08/100 A Max. Current (I max) of the measuring circuit: 100 A Power consumption: 7.5 VA Number of modules: 7 Certified: yes Frequency: 50/60 Hz

Energy meter three-phase, 1 tariff, direct measurement 63A three-phase energy meter for direct measurement of energy consumption up to 63 A with high accuracy (class B). Suitable for use in all network systems. They are equipped with an illuminated digital display that allows the display of energy consumption and power in a resolution of 7 digits including a descending point. A total counter and a partial counter with counter resetting are integrated. The consumption (counter value) can be transmitted remotely by a pulse output. Wiring errors and connection errors are displayed and the measurement data are stored periodically. Connection: Direct connection Operating current: 0.04/63 A Max. Current (I max) of the measuring circuit: 63 A Power consumption: 8.4 VA Number of modules: 4 Frequency: 50/60 Hz

4pin 63A for DIN rail/mounting plate Modular 4pin switch according to DIN EN 60947-3, for switching over under load of 2 low voltage circuits. With safety separation and 3 switching positions I-0-II. Suitable for mounting on hat rail or mounting plate. Rated current: 63 A Rated operating voltage Ue: 380/415 V Number of poles: 4 P Operating temperature: -20 ... 70 °C Connection type: Screwing technology

Vector distributor IP65 54 space units with QucikConnect PE and N clamp small distributor plaster; Installation small plastic distributor, according to DIN VDE 0603 part 1, according to DIN 43871. For installation of devices up to 63 A according to standard DIN 43 880 with 70 mm or 85 mm installation depth, measuring voltage AC 400 V/50 Hz. Consisting of plastic base with galvanized steel profile rail, embossing for metric line insertion sleeves (top, bottom); lateral embossings for connecting sleeves for connecting two or more distributors side by side. Built-in PE/N clamps quick connector; Top with 46 mm slot. Clear view door front flush, right or left adjustable, lockable, distributor flangeable. Installation type: Aufputz Protection class: IP65 Protection class: Protection class II Number of distribution rows: 3 Number of modules: 54Assembly type:CoatingMaterial of housing:PolystyreneType of protection:IP65Protection class:Protection class IINumber of distribution rows:3Number of modules:54Number of doors:1Type of door lock:snap closureColor:stingrayHeight installed product:602 mmWide installed product:418 mmDeep Installed Product:151 mm

Remote dimmer with automatic detection of load type. For controlling incandescent lamps, 230V halogen lamps and low voltage halogen lamps with electronic or wound transformers. Remote control of the dimmer by pushbutton (also illuminated: standby current up to 5 mA) and manual operation at the dimmer during local operation or with a control via a 1-10 V interface. Minimum and maximum dimming position on the device adjustable. Storage of the dimming setting when switching off or when network failure. Soft start function, integrated protection against load short circuit and electronic overtemperature protection with automatic power limitation, self-restoring.

SLS switch 3 polig E-characteristic 25A for DIN rail mounting. SH switch according to E-DIN WDE 0641-21 and standard DIN 43 880 size 2. SLS in 1- or 3-pole design, one-pole switching, with separate contact position display. For direct mounting on a hat rail. The standard (no suggestions) allows the following limitations: for the customer against unintentional or intentional switching; for the installer with a padlock when working in the plant; for the WNB with plombier wire, padlock or special key.

4 pole 40A for DIN rail/mounting plate Modular 4 pole switch according to DIN EN 60947-3, for switching over under load of 2 low voltage circuits. With safety separation and 3 switching positions I-0-II. Suitable for mounting on hat rail or mounting plate. Rated current: 40 A Rated operating voltage Ue: 380/415 V Number of poles: 4 P Operating temperature: -20 ... 70 °C Connection type: Screwing technology

small distributor, vector, APV, IP65, 48PLE, with small distribution channel; Installation small plastic distributor, according to DIN VDE 0603 part 1, according to DIN 43871. For installation of devices up to 63 A according to standard DIN 43 880 with 70 mm or 85 mm installation depth, measuring voltage AC 400 V/50 Hz. Consisting of plastic base with galvanized steel profile rail, embossing for metric line insertion sleeves (top, bottom); lateral embossings for connecting sleeves for connecting two or more distributors side by side. Built-in PE/N clamps quick connector; Top with 46 mm slot. Clear view door front flush, right or left adjustable, lockable, distributor flangeable.Assembly type: plaster / construction Protection class: Protection class II Number of distribution rows: 4 Number of modules: 48

Remote dimmer 500W Universal, LED/ESL remote dimmer for controlling dimmable energy saving and LED lamps, bulbs, 230V halogen lamps and NV halogen lamps with coiled or electronic Trafo. Automatic load detection Detection method and learning function via external Taster. Memory function is used when switching on Activation of the last set value. With low space requirement and low standby consumption of 0,2W. Remote control of the dimmer by probe also illuminated possible. Electronic short circuit and over- Temperature protection. Frequency: 50/60 Hz Performance: 500 VA Performance of conventional transformer 230 V: 500 VA Power transformer/EVG 230 V: 500 VA Operating temperature: -20 to 50 °C Storage temperature: -20 to 50 °C Number of modules: 2 Protection type: IP20 Assembly type: DIN rail (REG) Load type: universal

Fehlerstromschutzschalter 4polig 6kA 40A 30mA Typ HI stoßstromfest Fehlerstrom-Schutzschalter (FI) nach EN 61008-1, DIN EN 61008-2-1; VDE 0664 Teil 10 + 11, Berührungsschutz IP2x nach DIN VDE 0106 Teil 100. Geeignet zum nachträglichen Anbau von Zusatzeinrichtungen (Montage ohne Werkzeug). Anschlussklemmen mit Draht-Einschiebe-Schutz, Bi-Connect-Klemmen unten, externe blaue Test-Taste. Alle Produkte mit VDE Zeichen. Beschriftungsmöglichkeit direkt am Gerät.



Nennstrom:
40 A


Polanzahl:
4 P


Empfindlichkeit:
30 mA


Art des Differenzialschutzes:
HI


Stoßspannungsfestigkeit:
4 kV


Anzahl Module:
4


Betriebsnennspannung Wechselstrom:
230/400 V


Isolationsspannung:
500 V


Frequenz:
50 Hz


Drehmoment:
2,8Nm


Anschlussart:
Schraubtechnik


Gesamtverlustleistung unter Nennstrom:
6,5 W


Gerätelebensdauer, elektrische Schaltspiele:
2000


Gerätelebensdauer mechanische Schaltspiele:
4000


Anschlussquerschnitt bei flexiblem Leiter:
16mm²


Anschlussquerschnitt bei starrem Leiter:
25mm²


Betriebstemperatur:
-25 bis 40 °C


Lagerungstemperatur:
-55 bis 70 °C


Höhe installiertes Produkt:
83 mm


Breite installiertes Produkt:
70 mm


Tiefe installiertes Produkt:
70 mm

Nennstrom:
63 A


Polanzahl:
4 P


Empfindlichkeit:
100 mA


Art des Differenzialschutzes:
A SEL


Stoßspannungsfestigkeit:
4 kV


Anzahl Module:
4


Betriebsnennspannung Wechselstrom:
230/400 V


Isolationsspannung:
500 V


Frequenz:
50 Hz


Drehmoment:
2,8Nm


Anschlussart:
Schraubtechnik


Gesamtverlustleistung unter Nennstrom:
12,5 W


Gerätelebensdauer, elektrische Schaltspiele:
2000


Gerätelebensdauer mechanische Schaltspiele:
4000


Anschlussquerschnitt bei flexiblem Leiter:
16mm²


Anschlussquerschnitt bei starrem Leiter:
25mm²


Betriebstemperatur:
-25 bis 40 °C


Lagerungstemperatur:
-55 bis 70 °C


Höhe installiertes Produkt:
83 mm


Breite installiertes Produkt:
70 mm


Tiefe installiertes Produkt:
70 mm

SLS switch 3 polig E-characteristic 40A for DIN rail mounting. SH switch according to E-DIN VDE 0641-21 and standard DIN 43 880 size 2. SLS in 1- or 3-pole design, one-pole switching, with separate contact position display. For direct mounting on a hat rail. The standard (no suggestions) allows the following limitations: for the customer against unintentional or intentional switching; for the installer with a padlock when working in the plant; for the VNB with plombier wire, padlock or special key.

small distributor, vector, APV, IP65, 36PLE, with small distribution channel; Installation small plastic distributor, according to DIN VDE 0603 part 1, according to DIN 43871. For installation of devices up to 63 A according to standard DIN 43 880 with 70 mm or 85 mm installation depth, measuring voltage AC 400 V/50 Hz. Consisting of plastic base with galvanized steel profile rail, embossing for metric line insertion sleeves (top, bottom); lateral embossings for connecting sleeves for connecting two or more distributors side by side. Built-in PE/N clamps quick connector; Top with 46 mm slot. Clear view door front flush, right or left adjustable, lockable, distributor flangeable.Assembly type: plaster / construction Protection class: Protection class II Number of distribution rows: 2 Number of modules: 36

SLS switch 3 polig E-characteristic 25A for busbar Quickconnect. SH switch according to E-DIN WDE 0641-21 and standard DIN 43 880 Size 6. SLS in different pole shape, one-pole switching, with separate contact position display. Plug contacting for direct busbar mounting. The standard multi-function closure allows the following closures: for the customer against unintentional or misconductive switching, for the installer with a padlock when working in the plant, for the WNB with plomb wire, padlock or special key.

SLS switch 3 polig E-Characteristic 63A for DIN rail mounting. SH switch according to E-DIN VDE 0641-21 and standard DIN 43 880 size 2. SLS in 1- or 3-pole design, one-pole switching, with separate contact position display. For direct mounting on a hat rail. The standard (no suggestions) allows the following limitations: for the customer against unintentional or intentional switching; for the installer with a padlock when working in the plant; for the VNB with plombier wire, padlock or special key.