€60.00
Schletter
There are 15 products.
Slurry 943000-360 Thin plate screw 6,0x25 A2 (100 pieces)
2-5 days
SingleFix Pro for bead heights from 22 mm
€45.60
Sliding 943912-010 Flange nut locking tooth M10 (100 pieces)
2-5 days
VA flange nut with locking toothing integrated locking mechanism in flange
€36.00
Schletter 101001-020 roof hook Rapid2+Pro 45
2-5 days
Roof hook RAPID 2+ PRO, VA quality, welded, leg height 45 mm, web arrangement symmetrical, pre-assembled, compatible with standard and ProLine series with a rotatable multi adapter
€18.00
Schletter 112001-000 Folding clamp 503 standing folding roof
2-5 days
Folding terminal 503 standing folding roof VA for standing folding roofs The tightening torque must be limited in such a way that the sheet metal seam is not deformed and the thermal expansion of the sheet metal is not prevented! Please note: In the case of titanium tinplates it is necessary to check whether the folds may be loaded! For flooring roofs. Please note: For titanium tinplates, check whether the folds are allowed to be loaded! Folding clamp 503 VA for standing folding roof. LxBxH: 100 x 40 x 60 mm
€9.95
Slurry 135003-002 Grounding & Flash protection clamp VA M8
2-5 days
grounding and lightning protection terminal VA M8, clamping region Rd 8-10 mm, connection single/multi-wire 4 - 50 mm2LxBxH: 37 x 32 x 66 mm.
€5.04
Schletter 129063-000 Rapid cross connector
2-5 days
Fast mounting rail cross-connector, mounting from above, no additional tool required, ClickTop can be attached to all rails with sling click groove. Completely preassembled, for click groove M8, for cross rail system
€4.68
Schletter 129002-002 Connectors for E Solo Soloplus preassembled
2-5 days
Connectors for profile series Solo05, Solo05Light, Profi05Plus, FixZ-7, FixZ-15, preassembled incl. Screws Connector E Solo05 ProfiPlus preassembled, LxBxH: 120 x 49,6 x 50,4 mm
€4.35
Schletter 131121-901 Rapid16 center clamp 30-40, black anodized
2-5 days
Rapid16 30 - 40, black anodized, with grounding pin, mounting type horizontal/vertical, clamping length 50 mm
€2.64
Schletter 131101-901 photovoltaic terminal Rapid16 30-40 sw
2-5 days
RAPID 16 THE NEW KLEMMENFAMILIE The Schletter module terminal family Rapid16 offers many advantages, such as e.g. better storage by minimal variants and the grounding pin in each module clamp. Rapid16 is designed for all Schletter module support profiles with 8 mm click groove and for module frame heights of 30 - 50 mm. • Minimum variants for all applications • Integrated grounding pin • Optimum storage and fast installation • General structural approval Z14.4-631 • 10 years warranty The clamping area is divided into 2 sizes. The low module terminals can clamp modules with a frame height of 30-40 mm. The higher ones are suitable for frame heights of 40-50 mm. In all center terminals and in the case of the high end terminals, the claws can be rotated and are therefore suitable for vertical and horizontal (linear) module clamping. Exceptions are the end terminals for low module frames. For geometric reasons, rotation is not possible here. Therefore, there is the low end clamp also in the variant “H”. All clamps are also available in black anodized to match these optically to black module frames.
€2.52
Schletter 131101-001 photovoltaic terminal Rapid16 terminal 30-40, aluminium bar
2-5 days
RAPID 16 THE NEW KLEMMENFAMILIE The Schletter module terminal family Rapid16 offers many advantages, such as e.g. better storage by minimal variants and the grounding pin in each module clamp. Rapid16 is designed for all Schletter module support profiles with 8 mm click groove and for module frame heights of 30 - 50 mm. • Minimum variants for all applications • Integrated grounding pin • Optimum storage and fast installation • General structural approval Z14.4-631 • 10 years warranty The clamping area is divided into 2 sizes. The low module terminals can clamp modules with a frame height of 30-40 mm. The higher ones are suitable for frame heights of 40-50 mm. In all center terminals and in the case of the high end terminals, the claws can be rotated and are therefore suitable for vertical and horizontal (linear) module clamping. Exceptions are the end terminals for low module frames. For geometric reasons, rotation is not possible here. Therefore, there is the low end clamp also in the variant “H”. All clamps are also available in black anodized to match these optically to black module frames.
€1.80
Schletter 131121-001 photovoltaic medium terminal Rapid 16 30-40mm
2-5 days
RAPID 16 THE NEW KLEMMENFAMILIE The Schletter module terminal family Rapid16 offers many advantages, such as e.g. better storage by minimal variants and the grounding pin in each module clamp. Rapid16 is designed for all Schletter module support profiles with 8 mm click groove and for module frame heights of 30 - 50 mm. • Minimum variants for all applications • Integrated grounding pin • Optimum storage and fast installation • General structural approval Z14.4-631 • 10 years warranty The clamping area is divided into 2 sizes. The low module terminals can clamp modules with a frame height of 30-40 mm. The higher ones are suitable for frame heights of 40-50 mm. In all center terminals and in the case of the high end terminals, the claws can be rotated and are therefore suitable for vertical and horizontal (linear) module clamping. Exceptions are the end terminals for low module frames. For geometric reasons, rotation is not possible here. Therefore, there is the low end clamp also in the variant “H”. All clamps are also available in black anodized to match these optically to black module frames.
€1.80
Schletter 129011-900 End cap for solo black
2-5 days
for Solo 05 and Profi 05 plastic end cap solo black, LxBxH: 40,3 x 40,3 x 18,8 mm
€0.90
Slurry 973000-075 roof plate Dachh. 2,5/5mm
2-5 days
2.5/5 mm for roof hook mounting, to compensate for unevenness
€0.87
Schletter 129011-000 plastic end cap for Solo05/Profi05
2-5 days
Schletter 129011-000 plastic end cap for Solo05/Profi05
€0.60