Device box 49 mm deep (9063-02) hollow wall socket according to DIN VDE 0606-1 and DIN 49073 made of plastic, with PlusMinus device screws, for plate thickness 7-40 mm, Milling hole Ø 68 mm, Stationary openings for NYM lines and data lines as well as for pipes Ø 20/25 mm, Protection class IP 30
RAPID 16 THE NEW KLEMMENFAMILIE The Schletter module terminal family Rapid16 offers many advantages, such as e.g. better storage by minimal variants and the grounding pin in each module clamp. Rapid16 is designed for all Schletter module support profiles with 8 mm click groove and for module frame heights of 30 - 50 mm. • Minimum variants for all applications • Integrated grounding pin • Optimum storage and fast installation • General structural approval Z14.4-631 • 10 years warranty The clamping area is divided into 2 sizes. The low module terminals can clamp modules with a frame height of 30-40 mm. The higher ones are suitable for frame heights of 40-50 mm. In all center terminals and in the case of the high end terminals, the claws can be rotated and are therefore suitable for vertical and horizontal (linear) module clamping. Exceptions are the end terminals for low module frames. For geometric reasons, rotation is not possible here. Therefore, there is the low end clamp also in the variant “H”. All clamps are also available in black anodized to match these optically to black module frames.
RAPID 16 THE NEW KLEMMENFAMILIE The Schletter module terminal family Rapid16 offers many advantages, such as e.g. better storage by minimal variants and the grounding pin in each module clamp. Rapid16 is designed for all Schletter module support profiles with 8 mm click groove and for module frame heights of 30 - 50 mm. • Minimum variants for all applications • Integrated grounding pin • Optimum storage and fast installation • General structural approval Z14.4-631 • 10 years warranty The clamping area is divided into 2 sizes. The low module terminals can clamp modules with a frame height of 30-40 mm. The higher ones are suitable for frame heights of 40-50 mm. In all center terminals and in the case of the high end terminals, the claws can be rotated and are therefore suitable for vertical and horizontal (linear) module clamping. Exceptions are the end terminals for low module frames. For geometric reasons, rotation is not possible here. Therefore, there is the low end clamp also in the variant “H”. All clamps are also available in black anodized to match these optically to black module frames.
Device connection box for attachment to reinforcement. 1-part with injection-molded front part with 4 screw domes and 2 spreader claw fields per opening side fully insulated line transition in combination Standard combination distance 71 mm
Metal mounting bandHollow assembly belt – side edge “well” – the ideal universal fastening! The easy formability makes the assembly belt a universal problem-solving device. The area of application ranges from ceiling suspension to self-bent fastening clamp. Band length: 10 m Thickness: 0.7 mm Width: 12 mm Hole: 5.1 mm Material: galvanized steel strip Packaging unit: 10 pcs. Packaging: in practical plastic roll-off box
perforated metal mounting band, corrugated or straight easy formability Application: from ceiling suspension to self-bent fastening clamp Material: galvanized steel strip Band length: 10 m Packaging: in practical plastic roll-off box
Eaton LS switch, 16A, 1p+N, B Cable switchMeasurement switching capacity according to EN 60898:10kAInteractive neutral conductor: yesProtection type (IP):IP20Construction width:26,3mmSize (according to DIN 43880):1.5Number of poles:1+NTrigger characteristic:BMeasurement voltage:230/400AC48DCVMeasurement current:16AInstallation depth:60mmType of voltage:AC/DCFrequency:50/60Hz
Plug-in for PLS., CLS., PKN., PFIM, PFHM, (with auxiliary switch), any switchgear combinations with or without auxiliary switch possible, only a few components, 2 angle types per rail cross-section for three-phase displacement, common cover profile with end caps for ZV-SS etc. ZV-SS-80AShort-circuit and insulation resistance tested according to IEC/EN 60439-1Measurement current In A: 50Version: flatGalvanized: NoLength mm: 1000Width mm: 8Height mm: 2Flexible: no
Roof hook RAPID 2+ PRO, VA quality, welded, leg height 45 mm, web arrangement symmetrical, pre-assembled, compatible with standard and ProLine series with a rotatable multi adapter