S.1 sockets pws glossy

Verbindungsklemmen nach VDE 0620-1Bauart nach DIN 49440Nennspannung 250 V ACNennstrom 16 A mit Steckklemmenpolarweiß glänzend

socket Berker S.1/B.3/B.7 polar white, glossy
socket Berker S.1/B.3/B.7 polar white, glossy - increased contact protection VDE 0620-1 16 A, 250 V~ connection terminals according to VDE 0620-1 connection terminals according to IEC 60884-1 design according to DIN 49440 - with plug-in terminals

Connection terminals: according to VDE 0620-1Type of construction: according to DIN 49440Rated voltage: 250 V ACRated current: 16 A With imprint with connectors Particularly suitable for combinations of several sockets when using angle plugs. polar white glossy

Erhöhter Berührungsschutz (Kinderschutz): nach IEC 60884-1Verbindungsklemmen: nach VDE 0620-1Bauart: nach DIN 49440Nennspannung: 250 V ACNennstrom: 16 A erhöhter Berührungsschutzin 45°-Stufen variable EinbaulageKlappdeckel arretiert beim Öffnen in Endstellungmit AufdruckEinbaulage des Einsatzes in 45° Schritten wählbarmit SteckklemmenBesonders geeignet für Kombinationen mehrerer Steckdosen bei Gebrauch von Winkelsteckern.polarweiß glänzend

Connection terminals according to VDE 0620-1Design according to DIN 49440Rated voltage 250 V ACRated current 16 Awith connectorsBY S1polar white glossy

Connection terminals: according to VDE 0620-1Type of construction: according to DIN 49440Rated voltage: 250 V ACRated current: 16 A 2 x 1, wired without spreading claws with connectors For installation in cable duct sockets and in commercially available 2x hollow wall cans, as well as in 2x UP cans. BY S1 polar white glossy

Increased contact protection (child protection): according to IEC 60884-1Connection terminals: according to VDE 0620-1Type of construction: according to DIN 49440Rated voltage: 250 V ACRated current: 16 Aincreased contact protectionwith screw-release clampspolar white glossy

Connection terminals: according to VDE 0620-1Type of construction: according to DIN 49440Rated voltage: 250 V ACRated current: 16 ALabeling fieldincreased contact protectionwith screw-release clampsLabeling field height for P-touch band 6 mm.polar white glossy

Rated voltage: 250 V ACFrequency: 50/60 HzRated current: 16 AMeasurement error current: 30 mATrigger time: ≤ 30 msShort-circuit strength (for pre-securing 20 AgL): 3 kAImpact current strength: 250 A (8/20) μsType of construction: according to DIN 49440Connection terminals: according to VDE 0620-1Tested according to VDE 0664 (EN 61008)increased contact protectionto protect inserted and downstream consumersType A for alternating and pulsating direct currentswith connectorsBY S.1/B.3/B.7polar white glossyFor use in old plants with stock protection without additional protection requirements.Wired sockets are also protected.

Increased contact protection (child protection): according to IEC 60884-1Connection terminals: according to VDE 0620-1Type of construction: according to DIN 49440Rated voltage: 250 V ACRated current: 16 ALabeling field increased contact protection variable installation position in 45° steps Folding lid locked when opened in the end position With imprint Installation position of the insert can be selected in 45° steps with connectors Particularly suitable for combinations of several sockets when using angle plugs.Labeling field height for P-touch band 6 mm. polar white glossy

Increased contact protection (child protection): according to IEC 60884-1Connection terminals: according to VDE 0620-1Type of construction: according to DIN 49440Rated voltage: 250 V ACRated current: 16 A Labeling field increased contact protection with screw-release clamps Labeling field height for P-touch band 6 mm. polar white glossy

Increased contact protection (child protection): according to IEC 60884-1Connection terminals: according to VDE 0620-1Type of construction: according to DIN 49440Rated voltage: 250 V ACRated current: 16 A increased contact protection with connectors BY S1 polar white glossy

Increased contact protection (child protection): according to IEC 60884-1Connection clamps: according to IEC 60884-1Rated voltage: 250 V ACRated current: 16 AMirror depth: 14.5 mm increased contact protection 2-pole + earth with screw-release clamps polar white glossy

Increased contact protection (child protection): according to IEC 60884-1Connection terminals: according to VDE 0620-1Type of construction: according to DIN 49440Rated voltage: 250 V ACRated current: 16 A Labeling field increased contact protection with connectors Labeling field height for P-touch band 6 mm. polar white glossy

socket SCHUKO with labeling field Berker S.1/B.3/B.7 polar white, glossysocket SCHUKO with labeling field Berker S.1/B.3/B.7 polar white, shiny 16 A, 250 V~ connection terminals according to VDE 0620-1 connection terminals according to IEC 60884-1 design according to DIN 49440 marking field height for P-touch band 6 mm. - with plug-in terminals